1. Introduction
The Coolo Ewelink Zigbee Door Sensor is a wireless magnetic sensor designed to detect the open or closed status of doors, windows, drawers, cabinets, and other important areas. It operates using Zigbee 3.0 communication protocol and requires a Zigbee gateway (hub) to function. This sensor integrates seamlessly with various smart home platforms such as eWelink, Amazon Alexa, SmartThings, Zigbee2MQTT, Yandex Alice, and Google Home, providing real-time status feedback and enabling smart automation scenarios.
2. Package Contents
Please check the package for the following items:
- 1x Zigbee Door Sensor (Main body and Permanent magnet)
- 1x User Manual
- 1x Reset Pin
- 1x Double-sided Sticker
- 1x CR2032 Battery
3. Specifications
| Parameter | Detail |
|---|---|
| Product Name | Door magnetic sensor |
| Product Model | ZM-CG205 |
| Networking Form | ZigBee Mesh |
| Power Supply | CR2032 button battery 3V DC (included) |
| Battery Life | Approx. 1.5 years (based on 10 detections per day) |
| Operating Temperature | -10 °C ~ 45 °C |
| Detection Accuracy | ≥5mm (gap between main body and magnet) |
| Main Body Dimensions | 50 x 25 x 11 mm |
| Permanent Magnet Dimensions | 30 x 14 x 11 mm |
| Certifications | CE, FCC, UL |
4. Setup
4.1 Important Note: Zigbee Gateway Required
A Zigbee gateway (hub) is essential for this sensor to function. The sensor does not work alone and needs a Zigbee gateway to connect to your smart home network.
4.2 Physical Installation
- Prepare the Surface: Ensure the installation surface (door/window frame, cabinet) is clean, dry, and smooth.
- Attach the Main Body: Use the provided double-sided sticker to attach the larger main body of the sensor to the fixed part of the door/window frame.
- Attach the Permanent Magnet: Attach the smaller permanent magnet to the moving part of the door/window, aligning it with the middle line of the main body.
- Ensure Proper Gap: The gap between the main body and the permanent magnet must be less than 5mm when the door/window is closed for accurate detection.
4.3 Pairing with Zigbee Gateway
- Power On: Ensure the CR2032 battery is correctly inserted into the sensor.
- Enter Pairing Mode: Use the provided reset pin to press and hold the reset button on the sensor (usually a small hole) for a few seconds until the indicator light flashes, indicating it's in pairing mode.
- Initiate Pairing on Gateway: Open your Zigbee gateway's application (e.g., eWelink, SmartThings, Home Assistant with Zigbee2MQTT) and follow the instructions to add a new device or put the gateway into pairing mode.
- Confirm Pairing: Once successfully paired, the sensor's indicator light will stop flashing, and it should appear in your smart home application.
5. Operating the Sensor
5.1 Basic Functionality
The sensor detects changes in the magnetic field when the main body and the permanent magnet separate or come together. When a door or window opens, the magnet moves away from the main sensor body, triggering an 'open' status. When it closes, the magnet returns, triggering a 'closed' status.
5.2 Mobile App Monitoring
Through your connected smart home application (e.g., eWelink App), you can monitor the real-time status of your doors and windows. This allows you to check if they are open or closed from anywhere, providing peace of mind and enhanced security.
5.3 Smart Home Integration and Automation
The sensor can be integrated into various smart home routines and automations. For example:
- Receive notifications on your phone when a door or window is opened.
- Trigger a voice alarm through a smart speaker when an entry point is breached.
- Turn on lights automatically when a door opens.
- Adjust thermostat settings if a window is left open.
6. Maintenance
6.1 Battery Replacement
The sensor is powered by a CR2032 button battery, which typically lasts about 1.5 years with general use (10 times per day). When the battery level is low, your smart home application should notify you. To replace the battery:
- Gently open the main body of the sensor to access the battery compartment.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring correct polarity (+/-).
- Close the sensor body securely.
6.2 Cleaning
To maintain optimal performance, periodically wipe the sensor's exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the device.
7. Troubleshooting
- Sensor not connecting/pairing: Ensure you have a functional Zigbee gateway. Try resetting the sensor using the reset pin and re-initiating the pairing process on your gateway. Sometimes, repositioning the sensor or gateway can improve connectivity.
- Sensor not detecting open/close: Verify that the main body and the permanent magnet are aligned correctly and the gap between them is less than 5mm when closed. Check the battery level in your app or replace the battery if it's low.
- App connectivity issues: If the sensor is paired but not reporting status to the app, check your Zigbee gateway's connection to the internet and ensure the app is up to date. Some apps might require specific settings or permissions.
- Inaccurate battery readings: Battery percentage updates can sometimes take up to 24 hours to report accurately in some smart home systems. If a new battery shows low, wait a day before assuming it's faulty.
- Unexpected product in package: If you received an incorrect item (e.g., a switch instead of a sensor), please contact the seller for assistance.
8. User Tips
- Home Assistant & Zigbee2MQTT: Many users report excellent compatibility and easy setup with Home Assistant via Zigbee2MQTT. The device is often identified as HOBEIAN ZG-102ZA.
- Battery Life: While the specified battery life is 1.5 years, some users have reported 100% battery after 3 months of use, indicating potentially longer life depending on usage frequency.
- Compact Size: The sensor's small dimensions make it discreet and suitable for various applications, including baby beds and cabinets, where larger sensors might be cumbersome.
- Reliable Detection: The sensor is generally reliable, triggering when the two parts separate by more than a few centimeters and resetting when brought close together.
- Included Accessories: The sensor comes complete with a battery and double-sided tape, making installation straightforward out of the box.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's specific policies or contact the Coolo Official Store directly. Keep your purchase receipt as proof of purchase.