Introduction
The Joyroom JR-CB3 Bluetooth 5.4 Car Adapter is designed to seamlessly integrate modern Bluetooth connectivity into your car's audio system. This device allows for wireless music streaming and crystal-clear hands-free calling, enhancing your driving experience with convenience and safety. Featuring advanced noise cancellation technology and a user-friendly design, the JR-CB3 ensures high-quality audio and reliable performance.
Key Features
- HiFi Stereo Audio: Equipped with the latest Bluetooth 5.4 technology for faster, more stable connections, minimal sound quality loss, and an operating range of up to 100ft.
- Clearer Calls: Features dual microphones and CVC8.0 noise cancellation with a built-in filter IC to effectively reduce road noise, wind noise, and other distractions, ensuring clear hands-free calls.
- Plug and Play: Simple installation by plugging into the 3.5mm auxiliary jack and a USB power source. Automatically pairs with your phone upon car startup after initial setup.
- Multifunction Button & LED Light Design: Independent control buttons for track selection, volume adjustment, answering/hanging up calls, redialing, and activating voice assistants. LED lights enhance visibility in low-light conditions.
- Dual Reading Modes: Supports both 3.5mm AUX Bluetooth wireless play and TF card playback.
- Dual Device Connection: Allows simultaneous connection to two devices and supports automatic reconnection.
- Multi Safety Protection: Adheres to national quality standards (FCC, CE, RoHS, BQB certifications) with built-in withstand voltage, overcurrent, short circuit, and NTC overheat protection.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | Joyroom |
| Model Number | JR-CB3 |
| Wireless Type | Bluetooth |
| Bluetooth Version | V5.4 |
| Sound Track | 5.1 |
| Interface | 3.5 MM (AUX) |
| Content | AUDIO |
| Support AAC | Yes |
| Support Apt-x | No |
| Audio Codec | SBC |
| Supported Protocols | HSP, HFP, A2DP, AVRCP |
| Support Mode | Bluetooth, TF card |
| Transmission Range | ≤12m |
| Frequency Range | 20Hz-20KHz |
| Microphone Sensitivity | -38±2dB |
| Product Input | 5V |
| Input Interface | USB+AUX |
| Product Material | ABS+PC |
| Package | Yes |
| Origin | Mainland China |
| Certification | CE |
Setup Guide
Initial Installation and Connection
- Power and Audio Connection:
Insert the USB connector of the JR-CB3 adapter into an available USB power supply in your car (e.g., car USB port, USB charger). The adapter's light ring will illuminate, indicating it is powered on.
Plug the 3.5mm audio cable from the adapter into your car audio system's 3.5mm AUX input port. - Bluetooth Pairing:
Turn on the Bluetooth function on your mobile phone.
Search for new Bluetooth devices and select "JR-CB3" from the list of available devices to connect.
Once connected, you will hear a confirmation, and the adapter is ready for use.
Friendly Tip: The adapter is designed for quick pairing. After the first successful connection, it will automatically reconnect to your device when you start your car, eliminating the need for repeated manual pairing.


Operating Instructions
Music Playback
- Play/Pause: Press the central button once.
- Next Track: Press the '>>' button.
- Previous Track: Press the '<<' button.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
Hands-Free Calling
- Answer Call: Press the central button once when a call comes in.
- End Call: Press the central button once during a call.
- Reject Call: Long press the central button when a call comes in.
- Redial Last Number: Double-press the central button.
Voice Assistant
The adapter is compatible with voice assistants like Siri and Google Assistant. You can activate your phone's voice assistant through its standard voice commands (e.g., "Hey Siri", "Hey Google") while connected to the JR-CB3.
Dual Device Connection
The JR-CB3 supports connecting to two mobile devices simultaneously. This allows for seamless switching between music playback and calls from different phones.
TF Card Playback
Insert a TF (MicroSD) card with your desired audio files into the designated slot on the adapter to play music directly without a Bluetooth connection.


Maintenance
To ensure the longevity and optimal performance of your Joyroom JR-CB3 Car Adapter, please follow these maintenance guidelines:
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Moisture: Keep the device away from water and other liquids.
- Handle with Care: Avoid dropping or subjecting the device to strong impacts.
Troubleshooting
Q: Why can't the receiver be connected?
- Check Existing Connections: The receiver might already be connected to another device (e.g., another phone or computer). Disconnect it from any other device and attempt to reconnect.
- iPhone Specific Issue: If you are an iPhone user, the phone's Bluetooth may not automatically refresh. Manually navigate to your iPhone's Bluetooth settings and tap "JR-CB3" to initiate the connection.
- Factory Reset: If the above steps do not resolve the issue, you may need to restore the receiver to its factory settings. (Refer to the product packaging or official website for specific factory reset instructions if needed).
Q: Why is the sound of the receiver too low?
- Android Users: Ensure the playback channels are enabled. Go to your phone's Bluetooth settings, find "JR-CB3", and ensure both "media channel" and "call channel" are turned on.
- iPhone Users: Check your phone's "Settings" for any maximum volume limits that might be restricting audio output.
- Volume Synchronization: Due to varying operating systems, the volume of the receiver, phone, and car audio may not always synchronize. Manually increase the volume on your mobile phone, the JR-CB3 adapter, and your car audio system independently.
Q: My car does not have an AUX port. Can I still use this adapter?
- AUX Port Requirement: The Joyroom JR-CB3 adapter requires a 3.5mm AUX input to transmit audio to your car's speakers. If your car lacks an AUX port, this adapter cannot directly provide audio to your car stereo.
- Alternative Solutions: You would need an alternative solution, such as an FM transmitter that accepts Bluetooth input and broadcasts to your car radio, to achieve wireless audio in a car without an AUX port.
User Tips
- Safe Placement: Utilize the included adhesive pad to securely mount the adapter on your dashboard. This keeps the controls within easy reach and at eye level, promoting safer driving by minimizing distractions.
- Automatic Reconnection: Once initially paired, the adapter will automatically reconnect to your phone when you start your car, saving you time and effort.
- TF Card Convenience: For situations where you prefer not to use Bluetooth or want to save phone battery, load your favorite music onto a TF card and insert it directly into the adapter for playback.
- Optimize Call Clarity: The dual microphones and noise cancellation are designed to provide clear calls. Ensure the adapter is placed in a location where the microphones are not obstructed for best performance.
Warranty and Support
The Joyroom JR-CB3 Bluetooth 5.4 Car Adapter is manufactured to high-quality standards and has passed various certifications including FCC, CE, RoHS, and BQB. For any product-related inquiries, technical support, or warranty claims, please contact Joyroom customer service directly through their official channels. Please refer to your purchase documentation for specific warranty terms and contact information.