1. Introduction
The AUBESS ZigBee Wireless Scene Switch is a versatile and compact device designed to enhance your smart home experience. It allows you to wirelessly control various Tuya smart devices and activate pre-set scenes with a simple touch. This switch integrates seamlessly with popular smart home platforms like Tuya Smart Life, Amazon Alexa, and Google Assistant, providing convenient automation for your lighting, air conditioners, fans, and other electronic devices.
2. Specifications
| Feature | Detail |
|---|---|
| Product Name | Scene Switch |
| Model Number | Zigbee Smart Light Switch |
| Input | CR2430 3V (battery not included) |
| Dimension | 86 x 86 x 13 mm (3.38 in) |
| Battery Life | 730 days |
| Communication Method | ZigBee 802.15.4/2.4GHz / BT Mesh |
| Standby Power | < 1.5W |
| Working Temperature | -10°C ~ 45°C |
| Working Humidity | < 90% RH |
| Button Lifecycle | 500K presses |
| State of Assembly | Ready-to-Go |
| Certification | CE |
| Camera Equipped | No |
| High-concerned chemical | None |
3. Package Contents
Upon opening your package, please ensure all the following items are present:
- 1 x Wireless Scene Switch (battery not included)
- 1 x User Manual
- 2 x Double-sided Stickers
4. Setup Instructions
4.1 Important Note: ZigBee Hub Requirement
A ZigBee hub is required for the normal operation and integration of this wireless scene switch with your smart home system. The switch cannot be used alone without a compatible ZigBee hub and Tuya smart devices.
4.2 Battery Installation
- Locate the battery compartment on the back of the wireless scene switch.
- Insert one CR2430 3V battery (not included) into the compartment, ensuring correct polarity.
- Close the battery compartment securely.
4.3 Physical Installation
The switch features a compact magnetic design and can be easily installed anywhere using the provided double-sided tape. No wiring is needed.
- Choose a desired location for your switch (e.g., wall, bedside table, kitchen counter).
- Ensure the surface is clean and dry.
- Peel off the protective backing from the double-sided tape.
- Firmly press the switch onto the chosen surface for a few seconds.
5. App Integration and Scene Creation
5.1 Pairing with Tuya Smart Life App
To use the smart features of your switch, you must pair it with a compatible ZigBee hub and the Tuya Smart Life App.
- Ensure your ZigBee hub is set up and connected to the Tuya Smart Life App.
- Open the Tuya Smart Life App on your smartphone.
- Follow the app's instructions to add a new ZigBee device.
- Once the switch is detected, you can assign it to a room and begin creating scenes.
5.2 Creating Smart Scenes
The switch allows you to automate various smart devices by setting up 'Tap-to-Run' scenes in the Smart Life App. Each button on the switch can be configured with three pairing modes: single click, double click, and long press, allowing for multiple scene activations.
- Single Click: Assign a scene for a quick action (e.g., "Home Mode" - turn on living room lights).
- Double Click: Assign a scene for a secondary action (e.g., "Away Mode" - turn off all lights and AC).
- Long Press: Assign a scene for a specific function (e.g., "Sleep Mode" - dim bedroom lights and close curtains).
6. Operating Modes
The AUBESS ZigBee Wireless Scene Switch allows for quick activation of various smart home scenarios:
- Home Mode: Single press the scene switch to turn on all your lights, air conditioners, fans, and other electronic devices when you arrive home.
- Away Mode: Double press the scene switch to turn off all your lights, air conditioners, fans, and other electronic devices before leaving for work.
- Wake-up Mode: Move your finger to the wall scene switch to start your day with a pleasant mood.
- Sleep Mode: Long press the scene switch to turn off all your lights before sleeping.
7. Maintenance
7.1 Battery Replacement
The wireless scene switch is powered by a CR2430 3V battery, offering an impressive battery life of approximately 730 days. When the battery is low, the switch's performance may degrade. Replace the battery as follows:
- Gently open the battery compartment on the back of the switch.
- Remove the old CR2430 3V battery.
- Insert a new CR2430 3V battery, ensuring the positive (+) side is facing up.
- Close the battery compartment securely.
7.2 Cleaning
To clean the switch, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the device.
8. Troubleshooting
- Switch not responding: Ensure the CR2430 3V battery is correctly installed and has sufficient charge. Replace if necessary.
- Cannot connect to smart devices: Verify that your ZigBee hub is powered on, connected to your network, and properly paired with the Tuya Smart Life App. The scene switch requires a ZigBee hub for normal operation.
- Scenes not activating: Check the scene configurations in the Tuya Smart Life App to ensure they are correctly set up and linked to the switch's button actions (single click, double click, long press).
- Intermittent connectivity: Ensure the switch is within range of your ZigBee hub. Obstacles like thick walls can affect signal strength.
9. User Tips
- Strategic Placement: Utilize the compact, wireless design to place the switch in convenient locations where traditional wired switches are not feasible, such as next to your bed, on a desk, or near an entrance.
- Maximize Scene Control: With three distinct actions (single click, double click, long press) per button, plan your scenes carefully to get the most out of each gang. For example, a 4-gang switch can control up to 12 different scenes.
- Battery Monitoring: While the battery life is long, consider setting a reminder to check or replace the CR2430 3V battery annually to ensure uninterrupted service.
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided by your retailer or contact Aubess customer service directly. Keep your purchase receipt for warranty claims.