1. Introduction
The BolyGuard BG410-MS series camera is a digital infrared surveillance camera designed for various outdoor applications, including hunting, wildlife monitoring, farm security, and home security. It features a 1.44-inch color LCD display and supports 4G wireless communication for remote access and data transfer. This manual provides detailed instructions for setting up, operating, and maintaining your camera.
The BG410-MS 4G Trail Camera can send pictures to your cellphone or email, enabling remote monitoring.
Available Models
- BG410-D: Non-wireless Camera
- BG410-DFP: BG410-D Full Package mode, BG410-D with 2*18650 battery, 1*TF card and 1*TF card adapter
- BG410-M: 4G Wireless Camera
- BG410-MFP: BG410-M Full Package mode, BG410-M with 2*18650 battery, 1*TF card and 1*TF card adapter
- BG410-M(S): 4G Wireless Camera with only 940nm LED (This manual primarily focuses on this model's features).
2. Parts List
The following components are included with the BG410-M/BG410-MFP models:
| Part Name | Quantity |
|---|---|
| Camera | One |
| Belt | One |
| USB Cable | One |
| User Manual | One |
| 4G Antenna | One |
| 18650 Battery (BG410-MFP with) | Two |
| TF Card (BG410-MFP with) | One |
| TF Card Adapter (BG410-MFP with) | One |
| Iron Sheets | One |
The camera, USB cable, and mounting strap included in the package.
3. Getting Started & Setup
3.1 Camera Components
Diagram of the camera's internal view, highlighting key components such as the Lens, Mic, PIR sensor, Power button, Menu button, Up/Down navigation buttons, USB Port, TF card slot, SIM card slot, Battery Port, LED Indicator, Black IR LED, and LCD screen.
3.2 Power Supply
The camera is powered by two 18650 batteries (button top, length: 67-69mm). Batteries are not included with all models.
- External Power Supply: The camera can also be powered or its 18650 batteries charged via an external USB power supply adapter (5V/2A) or a solar panel (external power supply not included).
- USB Port Function: The USB port can function in two modes, automatically detected by the camera:
- Power Charging: Charges the camera's 18650 batteries.
- Mass Storage: The camera acts as a storage device, allowing you to read or copy photos/videos from the TF card.
The camera can be connected to an optional solar panel (SP-02U) for continuous power.
3.3 TF Card Information
This camera uses a TF card (microSD) for storage. For optimal performance, use Class 10 TF cards or better.
- Capacity: Supports up to 256GB TF card.
- Insertion: Insert the TF card into the camera before turning it on. The camera will not function without a properly inserted TF card.
- Removal: Do not remove the TF card while the camera is on, as this risks damaging internal components.
- Formatting: If you experience problems with an inserted TF card, try reformatting it using the camera's main settings option.
3.4 SIM Card Information (for Communication Models)
This function is only available with communication function models (e.g., BG410-M, BG410-MS).
- Insertion: Insert the SIM card into the camera before turning it on.
- SIM Card Type: The camera SIM card slot is sized for a standard SIM card. If you have a nano or micro-sized SIM card, a SIM card adapter will be required.
- Supported Wireless Carrier Bands:
- GSM: B3/B8
- WCDMA: B1/B8
- LTE FDD: B1/B3/B7/B8/B20/B28A
- Note: The camera will still function without a SIM card. The SIM card is needed only for wireless/cellular messaging capabilities.
4. Operation
4.1 Camera Modes
The camera operates in three main modes, accessed by pressing the OK button:
- OFF Mode: To turn off the camera when the display screen is active, press and hold the OK button until the screen powers off. For long periods of inactivity, it is recommended to remove the batteries.
- SETUP Mode (Test Mode): To turn on the camera, press and hold the OK button until the display screen activates. In this mode, you can customize camera settings or playback pictures and videos.
- Hunting Mode (ON Mode): After switching the camera to the ON position, if left alone for more than 20 seconds, it will automatically switch to Hunting Mode. Before entering Hunting Mode, the front (red) LED light will blink for approximately 10 seconds, allowing time to adjust the camera's position. The camera will then capture pictures or videos based on motion detection or timed intervals.
4.2 Basic Controls & Display
- OK/Power: Switches the camera on/off, saves parameter settings, enters/exits playback mode.
- Menu: Enters/exits the menu.
- ▲/Up: Switches between setting items.
- ▼/Down: Switches between option parameters, manually takes a photo or records a video.
When the camera is in ON Mode, the screen displays:
- Image size (e.g., 4M)
- Camera mode
- Signal strength
- Battery level
- SIM card status (recognized or not)
- Telecom provider (for communication models)
- Date (M:D:Y)
- Time (H:M:S)
- Available space
- Number of images
4.3 Managing Images and Videos
In TEST/SETUP mode, press the POWER button to view images or videos. The latest media will be shown on the LCD screen. Use the ▲/Up or ▼/Down buttons to cycle through captured media. Note that videos cannot be viewed directly on the camera.
4.4 Wireless Communication (for Communication Models)
Images can be sent directly to your wireless device, email, or Molnus cloud service based on the Send Mode settings.
4.4.1 Mobile Communication
The camera can receive and respond to commands via SMS, Molnus, and dedicated Apple or Android applications, provided it's connected to a wireless carrier.
- Enabling SMS Functionality: In TEST/SETUP mode, navigate to menu Setup options and set 'SMS control' to ON.
- MMS/Email/Molnus/FTP Functionality: Set the respective network settings in the menu Setup options (these vary by carrier).
4.4.2 PC Setup Software
Download the camera setup application (BMC_config.zip) from the Bolymedia website: www.bolymedia.com/index/Support. Connect the camera to your computer via USB cable, open the software, and select your camera model to configure settings.
4.4.3 Mobile Application Setup
Mobile apps are available for Android and Apple devices. Search for "BGTools" on Google Play Store (Android) or Apple App Store (iOS), or download from www.bolymedia.com/index/Support. Charges may apply for sending text messages to the camera.
- Adding a Device (Android): Open the BG Tools app and click the '+' icon to add a new device. Input your camera model and SIM card number, then click "Add".
- Adding a Device (iOS): Click '+' to add a device.
- Configuring Settings: In the app, select your country and provider, then check WAP/Internet Parameters. You can choose between Boly Email or Other Email service.
- Getting Photos: Use the "Get Photos" option to receive images via MMS (to phone) or GPRS (to email).
- Deleting a Device: For Android, long-click on the device. For iOS, swipe left on the device.
4.4.4 Molnus Cloud Service
Molnus is a cloud service for transferring and storing images from your camera. To use it:
- Ensure your camera has batteries and a SIM card with internet access.
- Obtain the APN name from your SIM card operator.
- Find the camera's IMEI and Control Code (available in SETUP mode under 'Version').
- Register your Molnus account and log in.
- Power on the camera in SETUP Mode and set 'Send mode' to "Molnus".
- Press the 'Register camera' button in Molnus and wait for registration to complete.
Test the function by moving in front of the camera; images should appear in the Molnus gallery within seconds to a minute.
Video demonstrating night vision capabilities, capturing moose in their natural habitat.
5. Camera Setup Options (Menu Settings)
To access camera settings, power on the camera by pressing OK, then press MENU. Use ▲/Up and ▼/Down to navigate and OK to save changes. Remember to press OK after changing EACH setting to save it.
| Main Option | Description |
|---|---|
| Language | Select display language (English, Czech, German, French, Spanish, Swedish, Finnish, Norsk, Dansk, Italian, Russian). Default: English. |
| Camera Mode | Choose between Photo (take a photo), Video (record a video), or Picture + Video (take a picture with a video clip, disables photo burst). Default: Photo. |
| Set Clock | Set date (day/month/year) and time (hour:minute:second). |
| Photo Size | Choose image resolution (e.g., 37MP, 24MP, 18MP, 12MP, 5MP). Default: 4 MP. |
| Photo Burst | Number of photos taken after trigger (1, 2, or 3). If Pic+Video is selected, defaults to 1 photo. Default: 1 Photo. |
| Video Size | Choose video resolution (e.g., 4K, 1080P, 720P, VGA). Default: 1080P. |
| Video Length | Duration of video recording (5-60 seconds in 5-second increments). Default: 10 seconds. |
| Time Lapse | Camera captures images/videos at a preset interval regardless of motion detection. If PIR Trigger/Sensitivity and Time Lapse are BOTH OFF, no media will be captured. Default: Off. |
| PIR Trigger/Sensitivity | Adjust PIR sensor sensitivity (High, Normal, Low, Off). High for little environmental interference, Low for high interference. Sensitivity is affected by temperature. Default: Normal. |
| Picture Type | Choose LED type for night photography: Black&White (940nm IR) or Colour (white LED). Default: Black&White. |
| PIR Interval | Time PIR sensor is disabled after each trigger (0 seconds to 1 hour). |
| Work Day | Select days of the week for camera operation (Hunting Mode only). Default: All. |
| Work Hour | Define specific hours for camera to be triggered (00:00 to 23:59). If Off, camera works at all times. Default: Off. |
| Camera Position | Set an A-Z indicator for multiple cameras to distinguish sources. Default: Off. |
| Recycle Storage | In hunting mode, if TF card is full, oldest media is overwritten. Disabled in SETUP mode. Default: Off. |
| Send To | Choose where to send images: MMS (cellular device via WAP), Email (email address via SMTP), Molnus (network), FTP (FTP address). Default: Molnus. |
| Send Mode | Three options: Daily (summarized info, last picture/video sent at end of set time), Instant (sends message instantly after capture), Off (disables communication). Default: Instant. |
| SMS Control | Enables mobile communication. When ON, camera responds to SMS commands. Default: Off. |
| SIM Set | Auto (recognizes carrier, configures parameters) or Manual (input parameters). Default: Auto. |
| Select Network | Lock network to 2G, 3G, or 4G. Default: Auto. |
| Attachment Size | Picture size for sending: Low (severely compressed), Normal (slightly compressed), High (original). Default: Low. |
| Password Set | Enter a four-digit password to protect camera access. Default: Off. |
| Time Stamp | Prints time and logo on video. Default: ON. |
| Format SD | Deletes all information on the TF card. Backup important data first. |
| Default Settings | Restores all settings to default values. |
| Version | Displays firmware version. |
| Register Camera | Used only for the Molnus app to register the camera. |
6. Maintenance
To ensure the longevity and optimal performance of your BolyGuard BG410-MS camera, consider the following maintenance tips:
- Battery Care: For long periods of inactivity, remove the 18650 batteries to prevent leakage and damage.
- TF Card Management: Regularly back up important data from your TF card and format it periodically to maintain performance and prevent errors.
- Environmental Protection: While the camera is IP66 waterproof and designed for tough weather, ensure all latches are securely closed to prevent moisture and dust ingress.
- Lens Cleaning: Gently clean the camera lens and PIR sensor window with a soft, lint-free cloth to ensure clear images and accurate detection.
7. Troubleshooting
7.1 Common Issues and Solutions
- There is something in front of the camera lens. Is the camera broken?
A: The camera is not broken. This is the IR-cut filter. When the camera is powered on, the IR-cut covers the lens. It will only be in a random position, sometimes covering the lens, when the camera is powered off.
Illustration of the IR-Cut filter mechanism.
- The display screen is suddenly black.
A: The camera may be in "Hunting mode." Press MENU to wake it up. If there is no response, the camera may be powered off. Check if the batteries are still good and properly inserted. Once verified, press and hold the OK/POWER button until the display turns on.
- Why can't my phone receive MMS?
A: MMS/GPRS functionality requires the SIM cards in both your camera and phone to have sufficient balance and data exchange enabled. Ensure your SIM card is active and has a data plan.
8. Specifications
| Feature | Specification |
|---|---|
| Image Sensor | 4MP CMOS Sensor for Outdoor |
| Lens | F/NO=2.4, FOV (Field of View)=57° |
| LED Type | 940nm (Black IR) and white LED |
| LED Number | 2pcs |
| PIR Detection Range | 100ft (30m) |
| Illumination Distance | 100ft (30m) |
| Display Screen | 1.44" Color LCD |
| Memory Card | Up to 256 GB (TF Card) |
| PIR Sensitivity | Adjustable (High/Normal/Low/OFF) |
| Trigger Time | 0.7s |
| Weight (BG410-D) | 174g (without battery) |
| Operation Temperature | -30°C to 60°C (-22°F to 140°F) |
| Storage Temperature | -30°C to 70°C (-22°F to 158°F) |
| Power Supply | 2*18650 batteries or Solar Panel (not included) |
| Sound Recording | Available |
| Mounting | Rope/Belt/Python lock |
| Dimensions (BG410) | 115*81*45 mm |
| Dimensions (Solar Panel) | 74*89*30mm or 179*126*13mm |
| Operation Humidity | 5% - 90% |
| Security Authentication | FCC, CE, RoHS |
The camera offers Ultra HD Clarity with 37MP photos and 4K video, featuring invisible 940nm no-glow IR night vision up to 100ft.
8.1 PIR Detection Zone
The camera features a new patented PIR (Passive Infrared) sensor. The PIR detection angle (α) is intentionally smaller than the field of view (FOV) angle (β). This design helps to reduce the rate of empty pictures and ensures that most, if not all, objects in motion are captured within the camera's view.
Diagram illustrating the PIR detection zone (α) and Field of View (β).
9. User Tips
- Battery Life: The camera is designed for over 6 months of standby time with two 18650 batteries. For extended operation, especially in active areas, consider connecting an optional solar panel.
- SIM Card Activation: Before deploying your camera for wireless communication, ensure your SIM card is activated and has a sufficient data plan to avoid issues with sending photos/videos.
- Optimal Placement: When setting up the camera, consider the PIR detection zone and FOV. Aim to place the camera where the subject will move across the detection zone rather than directly towards it for better capture rates.
10. Warranty & Support
The camera manufacturer provides a 12-month warranty against manufacturing defects or malfunctions. If your camera fails under regular use within one year, it will be repaired or replaced free of charge. This warranty does not cover damage resulting from improper use.
After the warranty expires, extra service can be provided, but the customer will be responsible for additional charges for parts, labor, and associated costs.
For warranty service or any assistance, please contact your reseller.
A PDF version of the user manual is available for download: BolyGuard BG410 Series User Manual (PDF)