1. Introduction
The LANGTU GK85 is a versatile three-mode mechanical keyboard designed for both gaming and office use. It features a compact 85-key layout, hot-swappable switches, vibrant RGB backlighting, and multiple connection options including wired (Type-C), 2.4G wireless, and Bluetooth. Its ergonomic design and gasket structure provide a comfortable and responsive typing experience.

2. Key Features
- Three-Mode Connectivity: Seamlessly switch between Wired (USB Type-C), 2.4G Wireless, and Bluetooth connections.
- Hot-Swappable Switches: Full key hot-plug support allows for easy customization and replacement of mechanical switches without soldering.
- Gasket Structure Design: Incorporates EVA sandwich cotton and bottom muffler cotton to reduce noise and enhance typing feel.
- Full Key Anti-Ghosting (N-Key Rollover): Ensures every keystroke is registered accurately, even during rapid typing or complex gaming commands.
- Colorful HD Backlight: Features 19 kinds of dynamic RGB lighting effects with adjustable brightness and speed.
- Dual System Compatibility: Supports both macOS and Windows operating systems with a dedicated switch for quick toggling.
- Ergonomic Design: Step slope design with support feet and ergonomic stepped PBT keycaps for comfortable use and reduced wrist fatigue.
- PBT Keycaps: Durable Doublshot PBT keycaps provide a premium feel and resistance to wear.
- Compact 85-Key Layout: Streamlined layout saves desktop space while retaining essential function keys.

3. Package Contents
Please check the package for the following items:
- LANGTU GK85 Mechanical Keyboard
- USB Type-C Cable
- 2.4G USB Receiver
- Keycap Puller (may be included for hot-swappable feature)
- Switch Puller (may be included for hot-swappable feature)
- User Manual (this document)
4. Setup Instructions
The GK85 keyboard offers three connection modes: Wired, 2.4G Wireless, and Bluetooth. Locate the mode switch and system switch on the side of the keyboard.

4.1. Wired Connection
- Set the mode switch to the 'OFF' position.
- Connect the provided USB Type-C cable to the keyboard's Type-C port and the other end to an available USB port on your computer.
- The keyboard will be automatically recognized and ready for use.
4.2. 2.4G Wireless Connection
- Set the mode switch to the '2.4G' position.
- Insert the 2.4G USB receiver into an available USB port on your computer.
- The keyboard should automatically connect. If not, ensure the keyboard is charged and try re-inserting the receiver.
4.3. Bluetooth Connection
- Set the mode switch to the 'Bt' (Bluetooth) position.
- The keyboard's indicator light will flash, indicating it is in pairing mode.
- On your device (computer, laptop, tablet), open Bluetooth settings.
- Search for new devices and select 'LANGTU GK85' (or similar name) from the list.
- Follow any on-screen prompts to complete the pairing process.
- Once paired, the indicator light will become solid.
4.4. System Switching (Windows/macOS)
Use the dedicated system switch on the side of the keyboard to toggle between Windows and macOS layouts and functions. Ensure the switch is set to the correct operating system for optimal performance.
5. Operating Instructions
5.1. Basic Usage
The GK85 functions as a standard keyboard. Simply type as you normally would. The N-Key Rollover feature ensures all keys are registered accurately.
5.2. FN Key Combinations
The 'Fn' key (Function key) allows access to various multimedia and system controls when combined with other keys. Refer to the table below for common combinations:

| Combination | Function |
|---|---|
| FN + INS | Adjust backlight mode |
| FN + ESC | Restore factory settings |
| FN + ↓ (Down Arrow) | Reduce backlight brightness |
| FN + ↑ (Up Arrow) | Increase backlight brightness |
| FN + ← (Left Arrow) | Slow backlight speed |
| FN + → (Right Arrow) | Speed up backlight |
| FN + F1 | Media Player |
| FN + F2 | Calculator |
| FN + F3 | WIN + TAB |
| FN + F4 | Computer |
| FN + F5 | Backlight brightness + |
| FN + F6 | Backlight brightness - |
| FN + F7 | Previous Track |
| FN + F8 | Play/Pause |
| FN + F9 | Next Track |
| FN + F10 | Mute |
| FN + F11 | Volume - |
| FN + F12 | Volume + |
5.3. Backlight Control
The GK85 features 19 different backlight effects. Use FN + INS to cycle through these effects. Adjust brightness with FN + ↑/↓ and speed with FN + →/←.

6. Maintenance
6.1. Cleaning
To keep your keyboard in optimal condition:
- Keycaps: Use a keycap puller to remove keycaps. Clean them with a mild soap solution and a soft cloth, then dry thoroughly before reattaching.
- Keyboard Body: Use a soft, lint-free cloth dampened with a small amount of water or isopropyl alcohol to wipe down the keyboard surface. Avoid excessive moisture.
- Between Keys: Use compressed air to remove dust and debris from between the keys. A small brush can also be used.
6.2. Hot-Swappable Switches
The GK85 supports full key hot-swapping, allowing you to change switches without soldering. To replace a switch:
- Carefully remove the keycap using a keycap puller.
- Use a switch puller to gently grip the top and bottom clips of the switch and pull it straight up.
- Align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are not bent.
- Reattach the keycap.

7. Troubleshooting
7.1. Keyboard Not Responding
- Wired Mode: Ensure the USB Type-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless Mode: Ensure the 2.4G USB receiver is properly inserted and the mode switch is set to '2.4G'. Check battery level.
- Bluetooth Mode: Ensure the mode switch is set to 'Bt'. Re-pair the keyboard with your device if connection is lost. Check battery level.
- All Modes: Try restarting your computer.
7.2. Backlight Not Working or Incorrect
- Ensure the keyboard is powered on and charged.
- Use FN + INS to cycle through backlight modes.
- Adjust brightness using FN + ↑/↓.
- Perform a factory reset (FN + ESC) if backlight settings are erratic.
7.3. Keys Not Registering or Double Typing
- Clean under the affected keycap using compressed air.
- If the issue persists, the switch may be faulty. Utilize the hot-swappable feature to replace the switch.
7.4. Connectivity Issues (Lag/Disconnection)
- Wireless Modes: Ensure there are no strong sources of interference (e.g., other wireless devices, large metal objects) between the keyboard and your device.
- Move closer to your device.
- Ensure the keyboard is fully charged.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LANGTU (YANFU) |
| Model | GK85 |
| Keyboard Standard | 85 Keys |
| Operation Style | Mechanical |
| Interface Type | Type-C / 2.4G Wireless / Bluetooth |
| Switches Hot Swap | Yes |
| Backlight Type | MULTICOLOR (19 kinds of effects) |
| Keycap Material | PBT plastic |
| Keycap Printing | Doublshot |
| Full Size Keyboard | No |
| Wrist Support | No |
| Battery Included | Yes |
| Application | Desktop, Laptop, Tablet |
| Language Support | Europe, Brazilian, Russian, Korean, Japanese, UK, French, English |
| Key Life | ~70 million times |
| Structure | Gasket Structure (Light gas structural shock absorption) |
| Product Dimensions (LxWxH) | 340mm x 126mm x 38mm |
| Product Weight | 0.9 kg |
| Certification | CE |
9. User Tips
- Maximize Battery Life: When not using the keyboard wirelessly, consider switching it to 'OFF' or 'Wired' mode to conserve battery.
- Customization: Experiment with different mechanical switches to find your preferred typing feel, thanks to the hot-swappable design.
- Ergonomics: Utilize the keyboard's adjustable feet to find a comfortable typing angle that reduces strain on your wrists.
10. Warranty and Support
For warranty claims, technical support, or any product-related inquiries, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty services.