Ajazz AK35i V3

Contents

Ajazz AK35i V3 Mechanical Keyboard User Manual

Model: AK35i V3

1. Introduction

The Ajazz AK35i V3 is a versatile mechanical keyboard designed for both gamers and office professionals. It features triple-mode connectivity (2.4G wireless, Bluetooth, and wired USB), a customizable 1.14-inch TFT color screen, hot-swappable switches, and PBT keycaps. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.

Ajazz AK35i V3 Mechanical Keyboard
Ajazz AK35i V3 Mechanical Keyboard with TFT screen and multimedia knob.

2. Package Contents

Please check the package for the following items:

  • Ajazz AK35i V3 Mechanical Keyboard
  • USB-C Cable
  • Keycap Puller
  • Switch Puller
  • User Manual (this document)

3. Setup and Connectivity

3.1 System Compatibility

The keyboard supports both Windows and Mac operating systems. Use the dedicated switch on the side of the keyboard to select your desired system mode.

3.2 Connectivity Modes

The AK35i V3 offers three connection modes: Wired (USB-C), 2.4G Wireless, and Bluetooth. A switch on the side of the keyboard allows you to easily toggle between these modes.

Connectivity switches for Ajazz AK35i V3 keyboard
Side view of the keyboard showing BT, USB, RF (2.4G Wireless) switches and Mac/Win system switch.

3.2.1 Wired Mode

  1. Set the connectivity switch to 'USB'.
  2. Connect the keyboard to your computer using the provided USB-C cable.
  3. The keyboard will be recognized automatically.

3.2.2 2.4G Wireless Mode

  1. Set the connectivity switch to 'RF'.
  2. Plug the 2.4G USB receiver into an available USB port on your computer.
  3. The keyboard should connect automatically. If not, press and hold the Fn key + R for 3 seconds to initiate pairing.

3.2.3 Bluetooth Mode

  1. Set the connectivity switch to 'BT'.
  2. On your computer or device, enable Bluetooth and search for new devices.
  3. On the keyboard, press and hold Fn + Q, Fn + W, or Fn + E for 3 seconds to enter pairing mode for Bluetooth device 1, 2, or 3 respectively. The indicator light will flash.
  4. Select 'Ajazz AK35i V3' from the list of available devices on your computer/device to complete pairing.

3.3 Charging the Battery

The keyboard is equipped with an 8000mAh battery. Connect the keyboard to a USB power source using the USB-C cable. The TFT screen will indicate charging status. A full charge provides extended wireless usage.

4. Operating Instructions

4.1 TFT Color Screen Functions

The 1.14-inch TFT color screen displays various information and allows for customization. Use the multimedia knob and function keys to navigate its menus.

TFT color screen displaying settings, lighting effects, brightness, date, time, and battery status
The 1.14-inch TFT color screen can display time, connection mode, power, custom GIF animations, and settings like lighting effects, brightness, and language selection.
  • Time and Date: Displays current time and date.
  • Connection Mode: Shows the active connectivity mode (Wired, 2.4G, BT).
  • Battery Level: Indicates the remaining battery charge.
  • Lighting Effects: Adjust backlight patterns and colors.
  • Light Brightness: Control the intensity of the backlight.
  • Language Selection: Choose the display language for the screen.
  • Custom GIF Animation: Supports displaying personalized GIF animations.

4.2 Multimedia Knob

The dedicated multimedia knob provides quick control over various functions:

  • Rotate: Adjust volume (default) or scroll through menu options on the TFT screen.
  • Press: Mute/unmute (default) or select an option on the TFT screen.

4.3 Macro Keyboard Functionality

The Ajazz AK35i V3 supports macro programming, allowing users to assign complex sequences of commands to a single key. Refer to the official Ajazz software (downloadable from their website) for detailed instructions on creating and managing macros.

4.4 Backlight Control

The keyboard features multicolor backlighting. Use the TFT screen settings or dedicated function key combinations (refer to the keyboard's quick guide or software) to customize backlight type, color, and brightness.

5. Maintenance

5.1 Cleaning

  • Disconnect the keyboard before cleaning.
  • Use a soft, dry cloth to wipe the surface of the keyboard.
  • For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the keyboard.
  • Use a can of compressed air to remove dust and debris from between the keycaps.

5.2 Hot-Swappable Switches

The AK35i V3 features full key shaft seat hot-plugging, allowing you to freely replace the mechanical switches without soldering. This enables customization of typing feel and easy replacement of faulty switches.

Close-up of a hot-swappable mechanical switch being removed from the keyboard
Illustration of a hot-swappable switch being removed from its socket.
  1. Using the provided switch puller, carefully grip the switch from the top and bottom.
  2. Gently pull the switch straight up to remove it from the PCB.
  3. To install a new switch, align its pins with the holes on the PCB.
  4. Press the switch firmly until it clicks into place. Ensure the pins are not bent.

5.3 PBT Keycaps

The keyboard is equipped with durable PBT plastic keycaps, known for their resistance to shine and wear. They can be removed using the provided keycap puller for cleaning or replacement.

6. Troubleshooting

  • Keyboard not responding: Ensure the keyboard is properly connected (wired) or paired (wireless/Bluetooth). Check the connectivity switch position.
  • Wireless connection issues: Ensure the 2.4G receiver is securely plugged in or Bluetooth is enabled and paired. Try re-pairing the device.
  • Keys not working: If individual keys are not working, try removing and re-inserting the switch using the switch puller. If the issue persists, the switch may need replacement.
  • Backlight not working: Check backlight settings via the TFT screen or software. Ensure brightness is not set to zero.
  • TFT screen blank: Ensure the keyboard is powered on and charged. If the issue persists, try restarting the keyboard.
  • Input lag: Ensure the keyboard is fully charged. For wireless modes, try moving closer to the receiver/device or switching to wired mode.

7. Specifications

FeatureSpecification
Brand NameAjazz
ModelAK35i V3
Keyboard Standard68 keys
Operation StyleMechanical
Switches Hot swapYes
Keycup MaterialPBT plastic
Keycup PrintingDye-sublimation
Backlight TypeMULTICOLOR
Type2.4Ghz Wireless, Bluetooth, Wired (Triple Mode)
Interface TypeUSB-C
Battery Capacity8000mAh
Battery IncludedNo (refers to non-removable, internal battery)
LanguageEnglish
ApplicationDesktop, Laptop, Number, Tablet
StyleStandard, Ergonomics, Multimedia, Gaming, For Laptop, Multifunctional Keyboard
CertificationCE, UL
OriginMainland China

8. Warranty and Support

For warranty information, technical support, or further assistance, please contact the seller or refer to the official Ajazz website. Keep your purchase receipt as proof of purchase.

Return & Refund Policy: Please refer to the seller's specific return and refund policy for details on product returns or exchanges.

Security & Privacy: Your personal details are protected and not shared with third parties without your consent. Payments are secure.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.