HITBOX HIM200

Contents

HITBOX HIM200 Multi-Process Welder Instruction Manual

Model: HIM200 | Brand: HITBOX

1. Introduction

The HITBOX HIM200 is a versatile 4-in-1 multi-process synergic welder designed for various welding applications, including TIG Lift, MMA (Stick), MIG (Gas/Gasless), and compatible with Spool Gun (sold separately). This digital inverter welding machine offers energy-saving operation and is ISO17637 certified, ensuring quality and performance. It features intelligent synergic digital control for ease of use and multiple safety protections.

HITBOX HIM200 Multi-Process Welder with accessories
Figure 1: HITBOX HIM200 Multi-Process Welder and included accessories.

2. Safety Information

WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.

  • Always wear appropriate personal protective equipment (PPE), including welding helmet, gloves, protective clothing, and safety shoes.
  • Ensure proper ventilation to avoid inhaling welding fumes.
  • Protect bystanders from arc rays and hot metal.
  • Do not touch live electrical parts.
  • Ensure the welding machine is properly grounded.
  • Keep a fire extinguisher nearby.
  • Read and understand all instructions before operating the machine.
Safety features of the HITBOX HIM200 welder
Figure 2: The HIM200 welder includes safety features such as Over Current Automatic Shutdown, Over Load Automatic Shutdown, Overheating Smart Cooling, and is Water Proof IP21S Tested.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and undamaged:

  • HITBOX HIM200 Welder Unit
  • MIG Gun
  • Stick Holder (Electrode Holder)
  • Ground Clamp
  • 0.8mm Welding Wire (0.5kg spool)
  • Welding Rods
  • Wire Brush
  • Contact Tips
  • 220V Adapter (EU Plug)
  • Instruction Manual
Included accessories for the HITBOX HIM200 welder
Figure 3: Visual representation of the accessories included with the HIM200 welder.

4. Product Overview

Familiarize yourself with the main components and controls of the HIM200 welder.

Panel instruction diagram for HITBOX HIM200 welder
Figure 4: Front and rear panel overview with numbered components.
  1. Digital LCD screen: Displays welding parameters and settings.
  2. Mode Button: Selects the welding process (MMA, MIG, TIG).
  3. Function Button: Accesses specific functions or sub-settings within a mode.
  4. Rotate and Confirm Knob: Adjusts values and confirms selections on the digital screen.
  5. "+" Pole: Positive terminal for welding cable connection.
  6. 4-Pin Socket: Connector for MIG torch or Spool Gun control.
  7. "-" Pole: Negative terminal for welding cable connection.
  8. Power Switch: Turns the machine ON/OFF.
  9. Fan: Cooling fan for internal components.

5. Setup

5.1 Power Connection

  1. Ensure the power switch (8) is in the "OFF" position.
  2. Connect the power cable to the welder's input port (AC110V/220V).
  3. Plug the power cable into a suitable power outlet (EU Plug, 220V or 110V depending on model/adapter).
  4. Turn the power switch (8) to the "ON" position. The digital LCD screen (1) should illuminate.
Video 1: Demonstrates power connection and basic setup for different welding modes.

5.2 MMA/ARC (Stick) Welding Setup

  1. Connect the Electrode Holder cable to the "+" pole (5) on the front panel.
  2. Connect the Ground Clamp cable to the "-" pole (7) on the front panel.
  3. Insert a suitable welding electrode into the electrode holder.
  4. Press the Mode button (2) to select MMA/ARC mode on the digital display.
  5. Adjust welding current and other parameters using the Rotate and Confirm knob (4) as needed.

5.3 MIG Welding Setup (Gasless Flux Core)

  1. Connect the Ground Clamp cable to the "+" pole (5) on the front panel.
  2. Connect the MIG Torch cable to the "-" pole (7) on the front panel.
  3. Connect the MIG Torch control cable to the 4-pin socket (6).
  4. Open the side panel of the welder.
  5. Install the 0.8mm welding wire spool onto the spindle.
  6. Feed the welding wire through the wire feeder mechanism and into the MIG torch liner. Ensure the wire tension is correctly set.
  7. Close the side panel.
  8. Press the Mode button (2) to select MIG mode on the digital display.
  9. Adjust welding current, wire feed speed, and other synergic parameters using the Rotate and Confirm knob (4). The display will show recommended settings for flux wire 0.8mm or 1.0mm.

5.4 TIG Lift Welding Setup

  1. Connect the Ground Clamp cable to the "+" pole (5) on the front panel.
  2. Connect the TIG Torch cable to the "-" pole (7) on the front panel.
  3. Ensure a suitable tungsten electrode is installed in the TIG torch.
  4. Press the Mode button (2) to select TIG mode on the digital display.
  5. Adjust welding current and other parameters using the Rotate and Confirm knob (4).

6. Operating Instructions

Always ensure proper safety gear is worn before beginning any welding operation.

6.1 MMA/ARC Welding

After completing the MMA setup (Section 5.2):

  • Strike the electrode against the workpiece to initiate the arc.
  • Maintain a consistent arc length and travel speed for a smooth weld bead.
  • The HIM200 features Arc Force, Anti-Stick, Hot Start, and VRD (Voltage Reduction Device) for improved arc stability and safety in MMA mode.
MMA mode features on the HIM200 welder display
Figure 5: MMA mode display showing features like Hot Start, Arc Force, Antisticking, and VRD.

6.2 MIG Welding (Gasless Flux Core)

After completing the MIG setup (Section 5.3):

  • Position the MIG torch close to the workpiece.
  • Press the trigger on the MIG torch to start the wire feed and arc.
  • Move the torch along the joint at a steady pace.
  • The Synergic MIG Control automatically adjusts wire feed speed based on the selected current, simplifying parameter setup.
Synergic MIG control display on the HIM200 welder
Figure 6: Synergic MIG Control allows adjustment of current and automatic wire feed speed, with options for Flux 0.8mm and Flux 1.0mm wire.

6.3 TIG Lift Welding

After completing the TIG setup (Section 5.4):

  • Touch the tungsten electrode lightly to the workpiece.
  • Lift the torch slightly to initiate the arc (Lift TIG).
  • Maintain a small arc gap and feed filler rod manually if required.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Regularly clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to blow out internal dust periodically.
  • Cable Inspection: Inspect all welding cables, torch, and ground clamp for wear, cuts, or damage before each use. Replace damaged components immediately.
  • Torch Maintenance: For MIG, regularly clean the contact tip and nozzle. For TIG, ensure the tungsten electrode is sharp and free of contamination.
  • Wire Feeder: Keep the wire feeder rollers clean and ensure proper tension for smooth wire feeding.
  • Storage: Store the welder in a clean, dry environment away from excessive dust and moisture.

8. Troubleshooting

This section provides solutions to common issues you might encounter.

ProblemPossible CauseSolution
Welder does not power onNo power supply; Power switch off; Faulty power cableCheck power outlet and circuit breaker; Ensure power switch is ON; Inspect power cable for damage.
No arc in MMA/TIG modePoor ground connection; Incorrect electrode/tungsten setup; Low current settingEnsure ground clamp is securely attached to clean metal; Check electrode/tungsten installation; Increase current setting.
Wire feeding issues in MIG modeIncorrect wire tension; Clogged contact tip; Kinked liner; Wrong roller sizeAdjust wire tension; Clean or replace contact tip; Inspect and straighten/replace liner; Ensure correct drive roller for wire size.
Poor weld qualityIncorrect parameters; Dirty workpiece; Improper techniqueAdjust current/voltage/wire speed; Clean workpiece thoroughly; Practice welding technique.
Overheat protection activatedExceeded duty cycle; Blocked ventilationAllow machine to cool down; Ensure clear airflow to fans.

9. Specifications

Key technical specifications for the HITBOX HIM200 Multi-Process Welder:

FeatureSpecification
Model NumberHIM200
Brand NameHITBOX
UseMIG, MMA, TIG Lift
Plug TypeEU Plug
Input Voltage (U1)1~ 220V / 1~ 110V
MMA Output Current (I2)120A (220V), 93A (110V) at 60% Duty Cycle
MIG Output Current (I2)120A (220V), 93A (110V) at 60% Duty Cycle
TIG Output Current (I2)120A (220V), 93A (110V) at 60% Duty Cycle
Insulation ClassH
IP RatingIP21S
Weight7KG (approx. 9.92 lb)
Dimensions (L x W x H)12.59" x 5.9" x 9.45"
CertificationCE, ISO17637
Technical specifications table for HIM200 welder
Figure 7: Detailed technical specifications for the HIM200 model.

10. User Tips

No specific user tips were available from the provided reviews or Q&A content.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized dealer. Keep your purchase receipt and product serial number handy for faster service.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.