1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your CNSPEED 60mm Water Temperature Gauge. Designed for all 12-volt cars, this professional gauge accurately monitors your engine's water temperature, ensuring optimal performance and preventing overheating. Please read this manual thoroughly before installation and use.
2. Package Contents
Verify that all items listed below are included in your package:
- 1 x Water Temperature Meter (60mm, 20-120 degrees Celsius)
- 1 x Water Temperature Sensor (1/8 NPT thread size)
- 1 x Water Temperature Sensor Adapter (available in sizes: 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 42mm)
- 2 x Clamps for adapter installation
- 2 x Screws
- 1 x Rubber ring
- 1 x Signal Wires (length: 180cm)
- 1 x Power Cord (length: 54cm)
- 1 x Power Series Line (length: 19.5cm)
- 1 x Instrument Cover Ring
- 1 x English Manual (this document)


3. Specifications
| Feature | Specification |
|---|---|
| Power | DC 12V (Professional) |
| Gauge Diameter | 60mm (2.5 inches) |
| Measurement Range | 20-120 degrees Celsius |
| Sensor Thread Size | 1/8 NPT |
| Backlight Color | White / Red |
| Universal Fitment | All 12-volt cars |
| Material | Aluminium (adapter), ABS Plastic (gauge housing) |
| Item Weight | 0.55kg (approx.) |
| Item Dimensions (Gauge) | 60mm (Height) x 60mm (Width) x 60mm (Length) |
| Manufacturer Part Number | Water Temp Sensor adapter |
| Interchange Part Number | YC101349+YC100345-OD28BL |
| Origin | Mainland China |



4. Installation Guide
Professional installation is highly recommended. Ensure the vehicle's engine is cool before beginning installation.
4.1. Mounting the Gauge
- Choose a suitable location in your vehicle's dashboard or a dedicated gauge pod for optimal visibility.
- Secure the gauge using the provided mounting bracket and screws.
4.2. Installing the Water Temperature Sensor and Adapter
The water temperature sensor adapter is designed to be installed in the radiator hose. Select the correct adapter size that matches your vehicle's radiator hose diameter.
- Locate a suitable section of the radiator hose, typically near the engine, where the adapter can be securely fitted.
- Drain a small amount of coolant from the radiator to prevent spillage when cutting the hose.
- Carefully cut a section of the radiator hose to accommodate the length of the water temperature sensor adapter. Ensure clean cuts.
- Insert the water temperature sensor adapter into the cut section of the hose.
- Secure the adapter to the hose using the two provided clamps, ensuring a tight, leak-free seal.
- Thread the 1/8 NPT water temperature sensor into the designated port on the adapter. Tighten gently to avoid damaging the sensor or adapter.
- Refill the radiator with coolant and check for any leaks.

4.3. Wiring Connections
The gauge requires a 12V power source, ground, and a signal wire from the temperature sensor.
- Power Connection: Connect the red wire from the gauge's power cord to a switched 12V power source (e.g., ignition switch).
- Ground Connection: Connect the black wire from the gauge's power cord to a reliable chassis ground point.
- Illumination Connection: Connect the orange wire (for white backlight) or another designated wire (for red backlight, if applicable) to your vehicle's dashboard illumination circuit. This allows the gauge backlight to turn on with your headlights.
- Sensor Signal Connection: Connect the signal wire from the water temperature sensor to the corresponding input on the back of the gauge.
- Power Series Line: If installing multiple gauges, use the provided power series line to daisy-chain power connections between gauges.

After all connections are made, start the engine and check for proper operation of the gauge and any leaks from the coolant system.
5. Operation
Once properly installed and wired, the CNSPEED Water Temperature Gauge will automatically display the engine's coolant temperature when the vehicle's ignition is on.
- Reading the Gauge: The gauge displays temperature in degrees Celsius, ranging from 20°C to 120°C. The red needle indicates the current temperature.
- Backlight: The gauge features a white/red backlight. The backlight will activate when your vehicle's illumination circuit is powered (e.g., when headlights are on).
- Normal Operating Temperature: Consult your vehicle's manufacturer specifications for the normal operating temperature range. Typically, engine coolant temperature should be between 80°C and 100°C.
- High Temperature Warning: If the temperature consistently reads above 100°C or approaches the red zone (120°C), it indicates potential engine overheating. Pull over safely and investigate the cause.
6. Maintenance
The CNSPEED Water Temperature Gauge requires minimal maintenance.
- Cleaning: Wipe the gauge face and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic or finish.
- Wiring Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
- Coolant System: Ensure your vehicle's coolant system is properly maintained, including regular coolant level checks and flushes as recommended by your vehicle manufacturer.
- Sensor Adapter: Inspect the water temperature sensor adapter and hose clamps for any signs of leaks or degradation.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Gauge does not light up | No power to illumination wire; faulty wiring; blown fuse | Check illumination wire connection; inspect wiring for breaks; check vehicle's fuse box. |
| Gauge reads 0 or maximum temperature constantly | Sensor not connected; faulty sensor; faulty wiring to sensor | Verify sensor connection; test sensor continuity; inspect signal wire. |
| Inaccurate temperature reading | Poor sensor contact; air in coolant system; incorrect sensor type | Ensure sensor is fully threaded; bleed coolant system; verify sensor is 1/8 NPT. |
| Coolant leak at adapter | Clamps not tight enough; incorrect adapter size; damaged hose | Tighten hose clamps; ensure correct adapter size for hose; inspect hose for damage and replace if necessary. |
8. Warranty and Support
For any issues or support inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
An additional user manual in PDF format may be available for download. Please refer to the official product page or contact customer support for access to this resource.