PaiPaitek PD 518V-1 No Shock Dog Training Collar User Manual

Introduction

Thank you for choosing the PaiPaitek PD 518V-1 No Shock Dog Training Collar. This device is designed to assist in training your dog using humane and effective tone and vibration corrections, without the use of static shock. It features a long-range remote, multiple training modes, and a durable, waterproof design suitable for various environments and dog sizes. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.

Product Features

• No Shock, No Prongs Design: Utilizes gentle vibrations and tones for humane training, ensuring comfort for your dog.
• 3 Effective Training Modes: Offers adjustable Tone (1-9 styles), Vibration (1-9 levels), and a combined Tone & Vibration mode (1-9 levels/styles) to meet diverse training needs.
• Extended 3300ft Remote Range: A detachable antenna provides a wide control range, ideal for both indoor and outdoor training.
• IP67 Waterproof Receiver: The collar receiver is fully waterproof, allowing your dog to enjoy activities like bathing, swimming, or playing in the rain without concern for water damage.
• Adjustable Collar: Designed to fit small, medium, and large dogs, accommodating weights from 10-110 lbs and neck sizes from 8-27 inches.
• Long-lasting Battery Life: The remote control provides up to 90 days of use, and the collar receiver up to 30 days, on a single 2-hour charge.
• User-Friendly Remote: Features large buttons, a non-slip silicone handle, and a clear LCD display for easy operation, even with gloves.
• Easy Charging: Includes a 2-in-1 USB-C charging cable for simultaneous charging of both the remote and receiver.
• Multi-Dog Control: Supports up to 3 channels, allowing for simultaneous or separate control of multiple dogs.
• Powerful Flashlight: The remote control is equipped with a built-in flashlight for enhanced safety and visibility during nighttime walks or training sessions.

Package Contents

The package includes the following items:

• 1 x Remote Control
• 1 x Collar Receiver
• 1 x Adjustable Collar Strap
• 1 x 2-in-1 USB-C Charging Cable
• 1 x Lanyard
• 1 x User Manual

Specifications

Setup

1. Charging the Devices

   Before first use, fully charge both the remote control and the collar receiver. Use the provided 2-in-1 USB-C charging cable to charge both units simultaneously. Connect the cable to a USB power source (e.g., laptop, power bank, phone adapter, car charger).

   

   • A full charge typically takes 2 hours.
   • The indicator light on the devices will change to show charging status (e.g., solid light when fully charged).

2. Attaching the Collar Strap

   Thread the adjustable collar strap through the receiver unit. Ensure the strap is securely fastened.

3. Fitting the Collar

   Place the collar around your dog's neck. The receiver should be positioned centrally on the underside of the neck. Adjust the strap so it is snug but not too tight. You should be able to fit two fingers comfortably between the collar and your dog's neck. A proper fit is crucial for the vibration to be felt effectively.

   

4. Powering On/Off

   • Remote: Press and hold the power button until the LCD screen illuminates. To turn off, press and hold the power button until the screen turns off.
   • Receiver: Press and hold the power button on the receiver until the indicator light flashes. To turn off, press and hold the power button until the light turns off.

5. Pairing (if necessary)

   The remote and receiver are usually pre-paired from the factory. If they are not communicating, follow these steps:

   1. Ensure both devices are off.
   2. Turn on the remote. Select the desired channel (1, 2, or 3) using the channel button.
   3. Press and hold the power button on the receiver until the indicator light flashes rapidly.
   4. Within 10 seconds, press any training mode button (Tone, Vibration, or Tone & Vibration) on the remote. The receiver's indicator light will flash slowly, indicating successful pairing.

Operating Instructions

1. Selecting a Channel (for multiple dogs)

   If you are training multiple dogs, use the channel selection button on the remote to switch between channels 1, 2, or 3. Ensure the correct channel is selected for the dog you wish to train.

   

2. Choosing a Training Mode

   The remote offers three training modes:

   • Tone Mode: Press the Tone button. You can adjust the tone style from 1 to 9 using the '+' and '-' buttons.
   • Vibration Mode: Press the Vibration button. You can adjust the vibration level from 1 to 9 using the '+' and '-' buttons.
   • Tone & Vibration Mode: Press the Tone & Vibration button. This mode synchronizes both tone and vibration. You can adjust the level/style from 1 to 9 using the '+' and '-' buttons.

   

3. Applying Correction

   Once a mode and level/style are selected, press the corresponding mode button again to deliver the correction to the dog's collar. Use corrections consistently and immediately after the undesirable behavior.

4. Using the Flashlight

   Press the flashlight button on the remote to activate the built-in flashlight for visibility in low-light conditions.

   

Maintenance

• Cleaning: Regularly clean the collar strap and receiver with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Charging: Ensure both devices are fully charged before each training session, especially if they haven't been used for a while. Do not overcharge.
• Storage: When not in use, store the collar and remote in a cool, dry place, away from direct sunlight and extreme temperatures.
• Water Exposure: While the receiver is waterproof, it's good practice to dry it thoroughly after prolonged water exposure to prevent mineral buildup.

Troubleshooting

• Collar not responding to remote:
  • Check if both the remote and receiver are powered on.
  • Ensure both devices are fully charged.
  • Verify that the remote is on the correct channel for the receiver.
  • Re-pair the remote and receiver if necessary (refer to 'Pairing' in the Setup section).
  • Check for obstructions or interference if the range is significantly reduced.
• Short control range:
  • Ensure the remote's antenna is securely attached and not damaged.
  • Avoid using the device near large metal structures, dense foliage, or strong electromagnetic fields, which can interfere with the signal.
  • Ensure both devices are fully charged.
• Receiver not vibrating/toning:
  • Confirm the receiver is powered on and paired.
  • Check the battery level of the receiver.
  • Ensure the collar is fitted snugly enough for the dog to feel the vibration.
• Battery not holding charge:
  • Ensure you are using the original charging cable and a reliable USB power source.
  • If the issue persists, the battery may need replacement or the unit may require service.

User Tips

• Start Low: Always begin with the lowest tone style or vibration level and gradually increase it until your dog responds. The goal is to get their attention, not to cause discomfort.
• Consistency is Key: Use the collar consistently and in conjunction with verbal commands and positive reinforcement for best results.
• Short Training Sessions: Keep training sessions short and positive to prevent your dog from becoming overwhelmed or associating the collar with negative experiences.
• Never Leave Unattended: Do not leave the collar on your dog for extended periods (more than 12 hours) or unsupervised, as it can cause skin irritation if not properly fitted or if left on too long.
• Observe Your Dog: Pay close attention to your dog's reactions. If they show signs of stress or fear, stop the training and consult with a professional dog trainer.
• Practice in Different Environments: Once your dog understands the commands in a quiet environment, gradually introduce distractions to reinforce their training.

Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.