staniot WSR101

Contents

Staniot WSR101 Wireless Indoor/Outdoor Siren User Manual

Model: WSR101 | Brand: staniot

1. Introduction and Overview

The Staniot WSR101 is a high-performance wireless siren designed for both indoor and outdoor security applications. Utilizing micro-technology in its control circuit, it ensures high accuracy and reliability. With a powerful 120dB alarm and integrated strobe light, it effectively deters intruders and alerts users to abnormal situations. This siren is waterproof, making it suitable for various environments, and is compatible with Staniot home security systems operating on 433MHz with eV1527 encoding.

Staniot Outdoor Wireless Siren

Figure 1: Staniot WSR101 Outdoor Wireless Siren highlighting its features.

2. Product Components and Features

Familiarize yourself with the siren's components and key features:

  • 120dB High Decibel Alarm: Emits a loud sound to deter intruders.
  • Strobe Light Flash: Provides visual alerts during an alarm event.
  • Waterproof Design: Suitable for both indoor and outdoor installation.
  • Wireless Connectivity: Operates on 433MHz frequency with eV1527 encoding, compatible with Staniot security panels.
  • Built-in Rechargeable Battery: Ensures continuous operation even during power outages.
Back view of Staniot WSR101 Siren with labeled components

Figure 2: Back view of the siren showing the Tamper Button, Set Button, Power Plug Port, Switch, and Rechargeable Battery compartment.

Staniot WSR101 Siren highlighting 120dB and 4 LED lights

Figure 3: Siren detailing 120dB output and 4 LED lights.

3. Setup and Installation

The Staniot WSR101 siren is designed for simple installation. Follow these steps:

  1. Unpack: Carefully remove the siren and included accessories (screws) from the packaging.
  2. Power On: Locate the "Switch" on the back of the siren (refer to Figure 2) and ensure it is in the "ON" position. The built-in rechargeable battery will provide power.
  3. Mounting Location: Choose a suitable location, either indoors or outdoors. Due to its waterproof design, it can withstand outdoor elements. Ensure the location is within range of your Staniot security panel.
  4. Mounting: Use the provided screws to securely fix the siren to a wall or desired surface. The back of the siren has designated mounting holes (see Figure 2 and Figure 4).
  5. Pairing (if not pre-paired):
    • Refer to your Staniot security panel's manual for specific instructions on adding new wireless accessories.
    • Typically, you will put the security panel into "pairing mode" or "add device" mode.
    • Press the "Set Button" on the back of the siren (Figure 2) to send a pairing signal to the panel.
    • Confirm successful pairing on your security panel.
Siren mounted on a wall with screws

Figure 4: Example of siren installation using screws.

Siren installed on the exterior of a house

Figure 5: Siren demonstrating outdoor installation.

4. Operating Instructions

Once installed and paired with your Staniot security panel, the siren operates automatically in response to alarm events:

  • Alarm Activation: When your Staniot security panel detects an intrusion (e.g., from a connected sensor), it will send a wireless RF signal (433MHz, eV1527) to the siren.
  • Siren Response: Upon receiving the alarm signal, the WSR101 siren will immediately activate its 120dB high-decibel sound and flash its integrated LED strobe lights to deter intruders and alert occupants/neighbors.
  • Disarming: The siren will cease alarming when the security panel is disarmed.
Siren working with a security panel

Figure 6: Siren integrated with a security panel for alarm activation.

High decibel alarm deterring an intruder

Figure 7: Visual representation of the siren's high decibel alarm in action.

5. Maintenance

To ensure optimal performance and longevity of your Staniot WSR101 siren, follow these maintenance guidelines:

  • Battery: The siren includes a built-in lithium electronic battery (7.4V 400mA). While it is rechargeable, monitor its performance. If the siren's volume or strobe light intensity decreases, it may indicate a low battery. The siren is designed to be powered via the Power Plug Port (Figure 2) for continuous operation and battery charging.
  • Cleaning: Periodically wipe the siren's exterior with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Inspection: Regularly check the mounting for security and ensure the Power Plug Port is free from debris if using external power.
  • Tamper Button: The tamper button (Figure 2) is a security feature. Ensure it is not obstructed or damaged, as it triggers an alarm if the siren is forcibly removed from its mounting.

6. Troubleshooting

ProblemPossible CauseSolution
Siren does not sound or flash during an alarm.
  • Siren's power switch is OFF.
  • Battery is low or depleted.
  • Siren is not properly paired with the security panel.
  • Siren is out of range of the security panel.
  • Compatibility issue with the security panel.
  • Ensure the "Switch" on the back of the siren is in the "ON" position.
  • Connect the siren to a power source via the Power Plug Port to charge the battery.
  • Re-pair the siren with your security panel (refer to Section 3).
  • Relocate the siren closer to the security panel.
  • Verify your security panel supports 433MHz and eV1527 encoding.
Siren triggers unexpectedly.
  • Tamper button activated.
  • False alarm from security panel.
  • Ensure the siren is securely mounted and the tamper button is not being pressed inadvertently.
  • Check your security panel's event log for the cause of the alarm.
Siren's battery life is shorter than expected.
  • Frequent alarms.
  • Extreme temperatures.
  • Battery degradation over time.
  • Ensure the siren is connected to a continuous power source if frequent alarms are expected.
  • Ensure operating within specified temperature range (-10°C to +50°C).
  • Consider replacing the internal battery if it's old and no longer holds a charge.

7. Specifications

ParameterValue
Model NumberWSR101
Brand Namestaniot
Alarm Volume120dB
Alarm Current<300 mA
Standby Current15.5mA
Battery Standby Time10 Hours
Input VoltageAC100~240V 50/60Hz
Working Temperature-10°C ~ +50°C
Relative Humidity<95% (no condensation)
Built-in BatteryLithium battery 7.4V 400mA
Wireless Parameters433MHz, eV1527
Dimensions (H x W x D)155mm x 100mm x 45mm
Smart Home PlatformTuya
CertificationsCE, RoHS
Product Parameter table for Staniot WSR101 Siren

Figure 8: Detailed product parameters.

Dimensions diagram of Staniot WSR101 Siren

Figure 9: Siren dimensions.

8. User Tips

  • Power Switch: Always ensure the ON/OFF switch on the back of the siren is set to "ON" for the device to function and charge its internal battery.
  • Compatibility Check: Before purchasing or installing, confirm that your existing security system or panel is compatible with 433MHz frequency and eV1527 encoding to ensure seamless integration.
  • Optimal Placement: For outdoor installations, choose a location that provides good visibility and sound propagation, while also being secure from easy tampering.
  • Continuous Power: For best performance and to ensure the battery is always charged, keep the siren connected to a power source via its Power Plug Port.

9. Warranty and Support

For any issues, questions, or support regarding your Staniot WSR101 Wireless Siren, please contact the manufacturer or your seller.

Additional operational videos and support resources may be available on the official Staniot YouTube channel: https://www.youtube.com/channel/UC0omnisV9_rZOcGsSMH1hLQ

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.