YFK Smart Lock Door

Contents

Tuya Smart Knob Lock User Manual

Model: Smart Lock Door

1. Introduction

Thank you for choosing the Tuya Smart Knob Lock. This manual provides detailed instructions for the installation, operation, and maintenance of your smart lock. Please read this manual carefully before installation and keep it in a safe place for future reference.

The Tuya Smart Knob Lock offers multiple unlocking methods including fingerprint, mechanical key, and the Tuya Smart Life APP. It is designed for convenience and security in various settings such as homes, offices, hotels, and warehouses.

Tuya Smart Knob Lock with app interface

Image: Tuya Smart Knob Lock with its mobile application interface.

2. Packing List

Before proceeding with the installation, please unpack the product package and verify that all the following accessories are included:

  • Front Panel (x1)
  • Rear Panel (x1)
  • Lock Body (x1)
  • Strike Plate (x1)
  • Gusset Box (x1)
  • Keys (x2)
  • Installation Key (x1)
  • M4 Screw (x3)
  • M4x21 Screw (x4)
Diagram of smart knob lock components: front handle, rear handle, lock body, strike plate, gusset box, keys, installation key, screws.

Image: Exploded view of the smart knob lock components.

Diagram showing the front lock handle with fingerprint verification area and the rear lock handle with passage mode and privacy mode controls.

Image: Detailed view of front and rear lock handles, highlighting fingerprint sensor, passage mode, privacy mode, charging port, and keyhole.

3. Installation

3.1 Important Notes Before Installation

  • Ensure the batteries are fully charged before installing the door lock.
  • The lock's rotating components must operate smoothly and flexibly.
  • This lock requires a mechanical key for manual unlocking. Please remove the mechanical key from the packaging and store it in a secure place for immediate use when needed.
  • When you hear the low battery alert, charge it immediately. Avoid leaving the device in a low-power state for extended periods.
  • Keep your fingers clean and dry when using this lock.

3.2 Door Compatibility

Please measure your door's dimensions to ensure compatibility:

  • Door Thickness: 35mm to 55mm
  • Hole Diameter: 55mm
  • Backset: Ensure the center-to-center distance conforms to the 60/70mm standard.
Diagram showing door lock dimensions and compatibility for standard US doors, including backset and latch measurements.

Image: Door lock dimensions and compatibility for standard US doors.

3.3 Installation Steps

  1. Install the Lock Body: Insert the lock body into the door edge, ensuring it is properly aligned.
  2. Tighten Lock Body Screws: Firmly secure the lock body with the provided screws.
  3. Align Lock Body: Align the lock body with the pre-drilled holes for proper installation.
  4. Detach Rear Lock: Use the installation key to depress the spring and detach the rear lock handle.
  5. Mount Rear Lock: Mount the rear lock by utilizing the lever hole.
  6. Install and Tighten Screws: Secure the rear lock with the remaining screws.
  7. Align Gap and Install Handle: Align the gap and install the handle.
Step-by-step visual guide for installing the smart knob lock, showing how to install the lock body, tighten screws, align components, and attach handles.

Image: Visual guide for smart knob lock installation steps.

4. Operation

4.1 Mechanical Knob Operation

  • Normal Open State: When the knob in the door is rotated to open vertically, the lock is in the normally open state. To lock, the fingerprint is continuously verified twice within 3 seconds, and the fingerprint unlock is verified once after the lock is closed.
  • Locked State: When the knob in the door is rotated to the horizontal position, it is reversed and locked.
  • Anti-lock Mode: In anti-lock mode, only the administrator's fingerprint can be used to unlock. After unlocking, the lock will automatically re-lock after 5 seconds.

4.2 Unlocking Methods

Diagram illustrating three unlock methods: APP unlock, Fingerprint unlock, and Key unlock. Also shows Type-C port for emergency power.

Image: Three-in-one unlock methods: APP, Fingerprint, and Key.

4.2.1 Fingerprint Unlock

Place your registered fingerprint on the sensor to unlock. The lock features quick and accurate fingerprint recognition.

4.2.2 Key Unlock

Use the provided mechanical keys to manually unlock the door. The keyhole is located on the front handle.

4.2.3 Tuya Smart Life APP Unlock

The lock can be controlled via the Tuya Smart Life APP using Bluetooth. For remote unlocking functionality, a Bluetooth gateway is required (sold separately).

Image showing a smart lock being remotely unlocked via a mobile phone app, with a Bluetooth gateway visible.

Image: Cell Phone Remote Unlocking, requiring a Bluetooth gateway.

4.3 Connecting with the Tuya Smart Life APP

  1. Download the App: Scan the QR code below or search for "TuyaSmart" in your mobile app store to download the official Tuya Smart Life App.
  2. Enable Bluetooth & Location: Open your phone's Bluetooth and Location services.
  3. Add Device: Open the Tuya Smart Life App. Click "Add Device" and follow the on-screen prompts to connect to your smart lock.
  4. Confirm Connection: Once connected, you can manage users, set fingerprints, and configure smart scenes.
  5. Add/Remove Members: From the app's homepage, navigate to "Member Management" to add or remove users and change names.
  6. Remove Device: To unbind the device, select "Remove Device" from the settings and confirm to wipe all related data.
QR code for downloading the Tuya Smart Life App.

Image: QR code to download the Tuya Smart Life App.

Screenshots of the Tuya Smart Life App showing steps to add a device, connect, and manage users.

Image: Tuya Smart Life App interface for device connection and management.

4.4 Fingerprint Enrollment

  1. Click 'Add' Button: In the app, navigate to the fingerprint settings and click the 'Add' button.
  2. Confirm Addition: Follow the prompts to confirm the addition of a new fingerprint.
  3. Capture Fingerprint: Repeatedly place your finger on the fingerprint recognition area, gently rotating it to capture five distinct scans. Ensure your finger is clean and dry.
Screenshots of the Tuya Smart Life App showing the fingerprint enrollment process.

Image: Tuya Smart Life App fingerprint enrollment process.

4.5 Light and Buzzer Indicators

  • Successful Identification: Green light turns on, one beep sound.
  • Failed Identification: Red light flashes three times, two beep sounds.
  • Charging: Red light is on.
  • Fully Charged: Green light is on.
  • Low Power Alarm: Red light flashes five times after opening the door.

4.6 Low Power Consumption State

  • Unbound Device: If not bound to a Bluetooth device, the lock enters sleep mode after 15 seconds of inactivity. To wake it up and search for Bluetooth, touch the fingerprint sensor or press a button.
  • Bound Device: If bound to a Bluetooth device, the lock enters sleep mode after 4 seconds of inactivity. It does not need to be woken up manually; the mobile phone can directly initiate a Bluetooth connection through the Tuya Smart APP.

5. Maintenance

  • Battery Charging: Charge the built-in rechargeable battery via the Type-C port when the low battery alert is triggered.
  • Cleaning: Keep the fingerprint sensor and lock surfaces clean and dry to ensure optimal performance.
  • Mechanical Key: Store the mechanical keys in a safe, accessible location for emergency use.
  • Bolt Mechanism: If the bolt mechanism experiences issues (e.g., not closing properly), inspect for obstructions or wear. Contact customer support for potential spare parts or repair guidance.
Image showing the smart lock with a Type-C charging cable connected to an external power bank, highlighting the rechargeable battery and emergency power port.

Image: Type-C charging for the smart lock's rechargeable battery.

6. Troubleshooting

6.1 Trial and Error Locking

If there are 5 consecutive failed recognition attempts, the device will enter a 120-second lock state. During this time, the fingerprint sensor will not respond, and an alarm will sound for 10 seconds. The lock can only be unlocked via Bluetooth through the app or by waiting for the 120-second lockout period to expire.

6.2 Restore Factory Settings

If you need to reset the lock to its factory settings, you have two options:

  • Via Tuya App: Data can be emptied through the Tuya Smart Life App.
  • Local Operation: Repeatedly rotate the knob 5 times within 5 seconds. The blue light of the fingerprint head will turn on. Touch any fingerprint within 10 seconds to clear all data. The buzzer will beep for a long time during this process.

6.3 Common Issues

  • Lock not responding: Check battery level. If low, charge via Type-C port.
  • Fingerprint not recognized: Ensure your finger and the sensor are clean and dry. Re-enroll fingerprint if issues persist.
  • App connectivity issues: Ensure phone's Bluetooth and Location are enabled. Try restarting the app or re-pairing the device.
  • Remote unlocking not working: Verify that a Bluetooth gateway is properly connected and configured for remote access.

7. Technical Specifications

FeatureSpecification
Brand NameYFK
Model NumberSmart Lock Door
Ways To UnlockApp, Bluetooth, Mechanical Keys, Fingerprint
ConnectivityBluetooth
Smart Home PlatformTuya
Power SupplyBuilt-in Rechargeable Battery
Type-C Power Supply5V 1A
Protection LevelIP66
MaterialAluminium alloy
Finish TypePolished
Handle DirectionDirection Reversible
Installation MethodPunch-free installation
Fit Door Thickness35-55mm
Suitable Door TypeWooden Door, Other
Suitable for Mortise6068
Included ComponentsSpare Mechanical Keys*2pcs
Special FeaturesSupport Gateway
Admin ID Range3
User ID Range17
FingerprintsUp to 20 sets
Standby Power Consumption≤20 μΑ
Operating Power Consumption≤200 uA
Low Voltage Alert4.5V ± 0.2V (below 4.3V, indicator flashes three times)
Operating Temperature-20°C to 70°C
Operating Humidity20% to 90% RH
CertificationCE
Diagram showing the appearance size of the smart knob lock: 5.5cm / 2.17in width, 7.3cm / 2.87in height, along with included components like latch, strike plate, keys, and screws.

Image: Appearance size and included components.

8. User Tips

  • Remote Features: For remote unlocking and full smart home integration (e.g., with Home Assistant), a Bluetooth gateway is required as the lock's direct connectivity is Bluetooth-only.
  • Emergency Power: The Type-C charging port is a convenient feature for emergency power if the battery runs low.
  • Installation: Many users find the installation process straightforward and easy. Ensure you follow the door measurement guidelines for a perfect fit.
  • Door Types: The lock has been successfully used on various door types, including metal doors.

9. Warranty and Support

For warranty information, technical support, or to inquire about spare parts, please contact the seller or refer to the official product page where you purchased the item. Keep your purchase receipt as proof of purchase.

A PDF version of the user manual is available for download: User Manual (PDF)

10. Product Video

Video: Unboxing and demonstration of the Tuya Smart Knob Lock's features and operation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.