LAXASFIT Smart Watch Y13 User Manual

1. Setup and Initial Activation

1.1. Downloading the App

To begin, scan the QR code below to download and install the official LAXASFIT application on your smartphone. This app is essential for connecting and managing your smartwatch.

Scan to download the LaxasFit App

1.2. Connecting the Watch

Follow these steps to connect your LAXASFIT Smart Watch to your smartphone:

1. Open the LaxasFit application and set up your user profile.
2. Navigate to the "Device" section within the app.
3. Click on "Add Device".
4. The app will scan for nearby devices. Select your watch from the scanned devices list.
5. Once selected, the binding process will be completed.

Important Connection Notes:

• Ensure your phone's Wireless (Bluetooth) is turned on.
• To find your watch's MAC address, go to "Settings" > "About" on your watch.
• When connecting for the first time, allow Wireless permissions if prompted by a pop-up message.
• If the watch is powered on for more than 120 seconds without connecting to the app, its Wireless feature will automatically turn off. To connect, re-enable Wireless ON/OFF in the watch's "Settings" > "Watch" menu, then repeat the connection steps.

1.3. Watch Charging and Activation

Before first use, the watch must be fully charged and activated. Use the provided wireless charging magnetic suction cup on the back of the watch.

Please use a 5V 1A or lower charger to charge the device.

2. Operating Your Smart Watch

Your LAXASFIT Smart Watch offers a wide range of functions to enhance your daily life and fitness routine. Here's an overview of its key features:

Overview of multiple practical functions including large screen, battery life, watch faces, and sports modes.

2.1. Communication Features

• Wireless Call: Open the app to link the watch's Wireless. After syncing with your phone, you can make, answer, or reject calls directly from the watch.
• Message Reminder: Receive notifications from social apps (WeChat, QQ, Twitter, Facebook, Line, etc.) and SMS. Ensure notification authorization is enabled on your phone.
• Find Mobile Phone: When connected, tap the watch to make your phone ring. Long-press the magnifying glass icon on the watch to activate.
• Voice Assistant: Interact with your watch using voice commands.

Make and receive wireless calls directly from your wrist.

Receive synced notifications from your smartphone.

2.2. Health and Fitness Tracking

• Sports Mode: Enter the exercise mode selection interface (running, jumping rope, cycling, climbing, walking, basketball, soccer, badminton) and start data monitoring.
• Exercise Record: Records all your exercise data.
• Pedometer: Counts your daily step data. Data clears at 00:00 AM and can be viewed in the app.
• Sleep Monitor: Enable Sleep Monitor to track the quality of your sleep.
• Heart Rate Monitor: Monitors your heart rate around the clock.
• Blood Pressure & Blood Oxygen: Measures blood pressure and blood oxygen levels.

Track various sports activities with dedicated modes.

Monitor your heart rate right on the wrist.

2.3. Smart Features & Customization

• Remote Shutter: After connecting to your phone, open the "APP" interface's shutter mode. Click or shake the watch to take pictures, which will be automatically stored on your phone.
• Music Players: Control music playback on your phone remotely after connecting the device.
• Weather: Displays current and tomorrow's weather info. Weather data syncs after connecting to the app and will not update after a long disconnection.
• Stop Watch: Tap the start button on the stopwatch page to begin timing, and tap the stop button to end timing.
• Alarm: Set up to 8 alarms in the app or on the watch. The watch will display an alarm icon and vibrate at the set time.
• Sedentary Reminder: Set a sedentary time. The bracelet will vibrate to remind you, and the interface will show a reminder label.
• Always on Display: After setting, the watch screen will display the time even after it turns off.
• Watch Face Style: Customize your watch face with photos from your smartphone or choose from multiple UI styles (Sudoku or Honeycomb).
• Brightness: Adjust the brightness level and backlight off time.
• Settings: Turn vibration on/off and adjust the volume.
• Language: Set the language in the app or on the watch; the language will be synchronized.

Control music playback directly from your watch.

Switch between different UI styles like Sudoku and Honeycomb.

3. Care and Maintenance

3.1. General Care

• Keep the watch clean and dry. Wipe with a soft, dry cloth.
• Avoid exposing the watch to extreme temperatures or direct sunlight for prolonged periods.
• Do not use abrasive cleaners or chemicals on the watch.

3.2. Water Resistance

Your LAXASFIT Smart Watch is rated as "Life Waterproof." This means it is resistant to splashes, rain, and brief immersion in water, such as washing hands. It is not suitable for swimming, showering, or diving.

Warning: Do not wear the watch in a hot bath or sauna.

The high temperature of bath water generates a lot of water vapor. This vapor, being in a gaseous phase with a small molecular radius, can easily penetrate through the gaps in the device casing. When the temperature drops, it will condense into liquid water droplets, which can easily cause an internal short circuit and damage the circuit board, leading to damage to the entire device.

4. Troubleshooting

4.1. Why the watch can't receive push notifications?

If your watch is not receiving notifications, check the following phone settings:

1. Phone Settings:
   a. Ensure message push is turned ON in your mobile phone settings.
   b. Verify that messages can be displayed in your phone's notification bar. The device's ability to receive push messages depends on whether information can be read from the notification bar. If there are no notifications on your phone, the device cannot receive push messages. (You may need to find notification settings in your phone to turn ON/OFF multimedia message alerts).
   c. Turn ON your device's accessibility settings. (You will need to find and enable accessibility settings in your phone's settings).

4.2. Connection Issues

If your watch is still not connecting to your phone despite following the instructions:

1. Click "Reset" in "Settings" > "System" on the watch to restore it to factory settings.
2. "Forget This Device" in your phone's Bluetooth settings.
3. Repeat the initial connection steps to try connecting your watch to your phone again.

4.3. FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

5. Specifications

High-definition display for clear visuals.

Efficient battery for extended use.

6. Warranty and Support

This product is certified with CE. For detailed information regarding compliance and regulations, please refer to the FCC warning in the troubleshooting section.

A user manual in PDF format is available for download. You can access it via the following link: LAXASFIT Smartwatch Manual (PDF)

Please note that any changes or modifications not expressly approved by the manufacturer responsible for compliance could void your authority to operate the equipment.

7. User Tips

• Battery Life: The watch typically offers 5 days of active use and up to 15 days of standby time, depending on usage patterns.
• Heart Rate Monitor: While the watch includes a heart rate monitor, please remember that its measurement data cannot be compared with professional medical equipment for diagnostic purposes.
• Connectivity: If you experience difficulty connecting, especially with specific phone models like Huawei Mate 40 Pro, ensure you follow all connection troubleshooting steps, including resetting the watch and forgetting the device in your phone's Bluetooth settings before re-pairing.
• Water Resistance: The watch is "Life Waterproof," suitable for splashes and rain, but avoid hot baths, saunas, or swimming to prevent damage.
• Notifications: To ensure you receive all messages and calls, verify that message push and accessibility settings are correctly configured on your smartphone.
• Language Support: The watch supports multiple languages including English, Spanish, Russian, and more. You can set your preferred language in the LaxasFit app or directly on the watch, and it will synchronize.
• Screen Size: The watch features a 1.83-inch display for clear visibility.