Hirisi B150

Contents

Hirisi Carp Fishing Bite Alarm

Model: B150

Introduction

The Hirisi B150 Carp Fishing Bite Alarm is designed to provide reliable audio and visual alerts when a fish bites, enhancing your fishing experience. This device features adjustable settings for volume, tone, and sensitivity, allowing customization to various fishing conditions. Its robust and water-resistant design ensures durability for both day and night fishing.

Package Contents

Please check the package for the following items:

  • Hirisi B150 Carp Fishing Bite Alarm (1 or 2 units, depending on purchase)
  • Instruction Manual (this document)

Note: 9V battery is not included and must be purchased separately.

Product Features

The Hirisi B150 Bite Alarm is equipped with several features to optimize your fishing:

  • LED Alarming Signals: Bright LED lights provide clear visual indication of a bite.
  • High Output Speaker: Ensures audible alerts even in noisy environments.
  • Adjustable Volume: Customize the sound level to your preference.
  • Adjustable Tone: Select different tones for varied bite indications.
  • Adjustable Sensitivity: Fine-tune the sensitivity to detect subtle or aggressive bites.
  • Snag Ear Bar: Helps keep the fishing rod securely in place.
  • Anti-Theft Sensor: An integrated sensor alerts you if the rod is removed from the alarm.
  • 2.5mm Extra Jack: For connecting an LED swinger.
  • Water Resistant: Designed to withstand outdoor fishing conditions.
Diagram of Hirisi B150 Bite Alarm with labeled parts
Figure 1: Hirisi B150 Bite Alarm with labeled components.

1. Snag ear bar
2. White LED light
3. 6 Red LED light band, rolling up and down
4. Power on/off button (Long press for on/off, press twice for anti-theft)
5. High output speaker
6. Anti-theft sensor
7. Red LED light
8. Volume control knob
9. Tone control knob
10. Sensitivity control knob
11. 2.5mm extra jack for LED swinger

Close-up of the control knobs and LED lights on the Hirisi B150 Bite Alarm
Figure 2: Detail of control knobs (Volume, Tone, Sensitivity) and LED indicators.
Video 1: Demonstration of Hirisi B150 Bite Alarm features, including sound, light, and sensitivity adjustments.

Setup Guide

1. Battery Installation

  1. Locate the battery compartment cover on the back of the bite alarm.
  2. Slide or unclip the cover to open the compartment.
  3. Insert one 9V battery, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.
Image showing the battery compartment of the Hirisi B150 Bite Alarm with a 9V battery being inserted.
Figure 3: Installing the 9V battery into the bite alarm.

2. Mounting the Bite Alarm

  1. Screw the bite alarm onto a standard fishing rod pod or bank stick using the threaded base.
  2. Ensure the alarm is securely tightened and stable.
  3. Place your fishing rod into the alarm's cradle, ensuring the fishing line passes over the roller.
Hirisi B150 Bite Alarm mounted on a fishing rod pod with a fishing rod in place.
Figure 4: Bite alarm mounted on a rod pod with fishing line engaged.

Operating Instructions

Power On/Off

  • To turn the device ON, long press the "Function" button (4) until the LEDs light up.
  • To turn the device OFF, long press the "Function" button (4) again until the LEDs turn off.

Adjusting Settings

Use the dedicated knobs to adjust the following:

  • Volume Control (8): Rotate the 'V' knob to increase or decrease the alarm volume.
  • Tone Control (9): Rotate the 'T' knob to change the pitch of the alarm sound.
  • Sensitivity Control (10): Rotate the 'S' knob to adjust the sensitivity to line movement. Higher sensitivity detects lighter bites.

Bite Indication

  • When a fish pulls the line (Run), the red LED light band (3) will roll upwards, and the white LED (2) will flash.
  • When the line drops (Drop), the red LED light band (3) will roll downwards, and the red LED (7) will flash.
  • The alarm produces different sounds for 'Run' and 'Drop' indications.
Hirisi B150 Bite Alarm showing LED lights indicating a bite.
Figure 5: Visual indication of a bite on the alarm.

Anti-Theft Function

  • To activate the anti-theft function, quickly press the "Function" button (4) twice after turning the alarm on.
  • If the fishing rod is removed from the alarm's cradle while this function is active, the alarm will sound.

Connecting an LED Swinger

  • Plug your 2.5mm LED swinger into the extra jack socket (11) at the bottom of the alarm.
  • The swinger will then provide additional visual indication synchronized with the bite alarm.

Maintenance

  • Cleaning: Wipe the alarm with a soft, damp cloth after each use to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the bite alarm in a dry, cool place when not in use. Remove the battery if storing for extended periods to prevent leakage.
  • Battery Replacement: Replace the 9V battery when the alarm's performance (sound/light intensity) diminishes. Always use a fresh, high-quality 9V battery.

Troubleshooting

ProblemPossible CauseSolution
Alarm not turning on.Dead or incorrectly installed battery.Check battery polarity. Replace with a new 9V battery.
Weak or no sound/light.Low battery. Volume/Tone settings too low.Replace battery. Adjust Volume (V) and Tone (T) knobs.
Alarm is too sensitive or not sensitive enough.Sensitivity setting is incorrect for conditions.Adjust the Sensitivity (S) knob to match fishing conditions.
Battery drains quickly even when off.Possible internal issue or low-quality battery.Ensure the alarm is fully powered off (long press function button). Use high-quality batteries. Consider adding an external switch if the issue persists (advanced user modification).
Anti-theft alarm sounds unexpectedly.Anti-theft function accidentally activated.Ensure the anti-theft function is only activated when needed (double press function button).

Specifications

FeatureDetail
ModelB150
TypeFish Bell/Alarm
MaterialABS
Power Source1 x 9V Battery (not included)
LED IndicatorsWhite LED, 6-segment Red LED band, Red LED
ControlsVolume, Tone, Sensitivity
Additional FeaturesSnag Ear Bar, Anti-Theft Sensor, 2.5mm Jack for Swinger
Water ResistanceYes
Package Dimensions (approx.)Length: 22 cm, Width: 16 cm, Height: 5 cm
Package Weight (approx.)0.084 kg

User Tips

  • Battery Quality: Use high-quality 9V batteries for optimal performance and to avoid premature drainage.
  • Waterproofing: While water-resistant, ensure the battery cover is snug to protect against rain.
  • Sensitivity Adjustment: Experiment with sensitivity settings to find the ideal level for different fishing conditions and target fish species.
  • Rod Security: The snag ear bars are useful for keeping rods in place, especially in windy conditions.
  • Anti-Theft Feature: Remember to activate the anti-theft feature by double-pressing the function button if you need to step away from your rods.

Frequently Asked Questions (FAQ)

Q: Is the bite alarm waterproof?
A: Yes, the device is designed to be water-resistant and should be fine in rain, especially with a snug battery cover.
Q: Can I use lithium 9V batteries?
A: Yes, you can use 9V lithium batteries. Ensure they are of good quality for best performance.
Q: Does this model connect to a remote receiver?
A: This specific model (B150) is a standalone bite alarm and does not have a built-in remote receiver function. If you have a set with a remote, this individual alarm may not be compatible for remote connection.
Q: What color are the LED lights?
A: The alarm features a white LED, a 6-segment red LED band, and an additional red LED. Some variations might have orange or green LEDs depending on the specific SKU purchased.

Warranty and Support

For any issues or questions regarding your Hirisi B150 Carp Fishing Bite Alarm, please refer to the seller's policies or contact their customer support. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.