ATK A87 Pro Mechanical Keyboard User Manual

1. Introduction

The ATK A87 Pro is a high-performance 87-key mechanical keyboard designed for both gaming and office use. It features triple-mode connectivity (Wired, 2.4G Wireless, Bluetooth), a Gasket mounted structure for enhanced typing feel, hot-swappable switches for customization, and vibrant RGB backlighting with music rhythm support. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.

Image: ATK A87 Pro Mechanical Keyboard showcasing its 87-key layout and purple RGB backlighting.

2. Package Contents

Please check the package for the following items:

• ATK A87 Pro Mechanical Keyboard
• USB-C to USB-A Cable
• 2.4G USB Receiver
• Keycap Puller
• Switch Puller
• User Manual (this document)

3. Setup

3.1 Initial Charging

The ATK A87 Pro is equipped with a 12000mAh battery. For optimal performance, it is recommended to fully charge the keyboard before first use. Connect the keyboard to a USB power source using the provided USB-C cable. The charging indicator (if present) will show the charging status.

Image: Illustration of the 12000mAh battery with NTC temperature control technology, ensuring stable and lasting endurance.

3.2 Connectivity Modes

The keyboard supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.

3.2.1 Wired Mode

1. Connect the USB-C end of the cable to the keyboard's port.
2. Connect the USB-A end of the cable to your computer's USB port.
3. The keyboard will be automatically recognized and ready for use.

3.2.2 2.4G Wireless Mode

1. Locate the 2.4G USB receiver, typically stored in a hidden compartment on the keyboard (refer to image below for location).
2. Plug the 2.4G USB receiver into an available USB port on your computer.
3. Switch the keyboard's mode selector (usually a physical switch on the keyboard) to 2.4G mode.
4. The keyboard should connect automatically.

3.2.3 Bluetooth Mode

1. Switch the keyboard's mode selector to Bluetooth mode.
2. On your computer or device, open Bluetooth settings and search for new devices.
3. Select "ATK A87 Pro" (or similar name) from the list of available devices to pair.
4. Follow any on-screen prompts to complete the pairing process.

Image: Diagram showing the hidden storage bin for the 2.4G receiver, located behind the keyboard's foot brace.

4. Operating Instructions

4.1 Key Functions

The ATK A87 Pro features an 87-key layout. Standard alphanumeric keys function as expected. The 'Fn' key (Function key) is used in combination with other keys to access multimedia controls and special functions.

• Fn + F1-F12: Typically control multimedia functions (e.g., volume, play/pause, track skip) or system functions (e.g., screen brightness). Specific functions may vary.
• Fn + Arrow Keys: Often used to control RGB lighting effects (brightness, speed, mode).

4.2 RGB Lighting Control

The keyboard supports 16 million color RGB lighting with various effects, including music rhythm synchronization. Use the dedicated lighting control keys or Fn key combinations to cycle through lighting modes, adjust brightness, and change animation speed.

4.3 Hot-Swap Switches

The ATK A87 Pro features full key hot-swap capability, allowing you to change mechanical switches without soldering. This enables customization of your typing experience.

1. Power off the keyboard or disconnect it from your computer.
2. Use the provided switch puller tool to carefully remove the desired switch from the keyboard.
3. Align the pins of the new switch with the holes on the PCB.
4. Gently press the new switch into place until it clicks securely. Ensure pins are not bent.
5. Reconnect the keyboard and test the new switch.

Image: Close-up view of a keycap and a hot-swappable switch, demonstrating the ease of customization.

4.4 Multi-level Keyboard Design

The keyboard features two-stage foot support, allowing you to adjust the typing angle for ergonomic comfort. Available angles include 4.5°, 13°, and 17°.

Image: Illustration of the keyboard's multi-level design, showing the 4.5° (unused foot support) and 13° (small foot support) tilt options.

5. Maintenance

5.1 Cleaning

• Keycaps: Use the provided keycap puller to remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
• Chassis: Wipe the keyboard chassis with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
• Between Keys: Use compressed air to remove dust and debris from between the keys.

5.2 General Care

• Avoid exposing the keyboard to extreme temperatures, humidity, or direct sunlight.
• Do not spill liquids on the keyboard. If a spill occurs, immediately disconnect the keyboard and allow it to dry completely before reconnecting.
• Store the 2.4G USB receiver in its designated compartment when not in use to prevent loss.

6. Troubleshooting

6.1 Connectivity Issues

• Wired: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
• 2.4G Wireless: Ensure the 2.4G receiver is plugged in and the keyboard is in 2.4G mode. Try re-pairing by unplugging and replugging the receiver, then switching the keyboard mode.
• Bluetooth: Ensure the keyboard is in Bluetooth mode and discoverable. Remove the keyboard from your device's Bluetooth list and attempt to re-pair. Ensure your device's Bluetooth is enabled.

6.2 RGB Lighting Not Working

• Check if the lighting is turned off or set to minimum brightness. Use Fn key combinations to adjust.
• Ensure the keyboard battery has sufficient charge.

6.3 Keys Not Responding

• In wired mode, ensure the cable is connected. In wireless modes, check battery level and connectivity.
• If only specific keys are not responding, the switch might be faulty. Utilize the hot-swap feature to replace the switch.
• Ensure the keyboard is not in a locked mode (e.g., Windows key lock).

6.4 Battery Life Concerns

• Ensure the keyboard is fully charged.
• High brightness RGB lighting consumes more power. Reduce brightness or turn off lighting to extend battery life.
• Ensure the keyboard is switched off when not in use for extended periods.

7. Specifications

Image: Comprehensive specification table for the ATK A87 Pro keyboard, detailing features like shaft body, keycap height, and transmission technology.

Image: Comparison table highlighting key differences between the ATK A87 and ATK A87 Pro models, including battery capacity.

8. User Tips

• Optimize Connectivity: Use 2.4G wireless for the lowest latency during gaming, and Bluetooth for convenience with multiple devices or when portability is key. Wired mode ensures consistent power and connection.
• Personalize Typing Feel: Take advantage of the hot-swappable switches to experiment with different switch types (linear, tactile, clicky) to find your preferred typing or gaming experience.
• Ergonomic Comfort: Adjust the keyboard's two-stage foot support to find the most comfortable typing angle for your wrists and posture, reducing strain during long sessions.
• Dynamic Lighting: Explore the various RGB lighting modes, including the music rhythm synchronization, to enhance your desktop aesthetic or gaming atmosphere.
• Software Customization: Download the ATKHUB software for advanced customization of key assignments, macros, and lighting effects. (Reference: www.ATKGEAR.COM)

9. Warranty and Support

For warranty information, technical support, and driver downloads, please visit the official ATKGEAR website or contact your retailer. Product driver and other services can be found at www.ATKGEAR.COM.