1. Introduction
Thank you for choosing the ENZO6081 75% Customized Mechanical Keyboard. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard to ensure optimal performance and longevity. The ENZO6081 features a compact 75% layout with 81 keys, tri-mode connectivity, hot-swappable switches, RGB backlighting, and a premium gasket-mounted design for an enhanced typing experience.

2. Package Contents
Please check the package for the following items:
- ENZO6081 Mechanical Keyboard
- USB Type-C Data Cable
- Switch Puller
- Keycap Puller
- Supplementary Keycaps
- 2 Spare Switches
- User Manual (this document)
- Certificate
3. Setup
3.1 Keyboard Layout and Components

3.2 Connection Modes
The ENZO6081 supports three connection modes: Wired (USB Type-C), 2.4G Wireless, and Bluetooth. The mode switch and 2.4G receiver storage compartment are located on the back of the keyboard.

3.2.1 Wired Connection
- Locate the USB Type-C port on the keyboard.
- Connect the provided USB Type-C cable to the keyboard and your computer.
- Ensure the mode switch on the back of the keyboard is set to 'Wired' or the appropriate position for wired mode.
- The keyboard will be automatically recognized by your computer.
3.2.2 2.4G Wireless Connection
- Take out the 2.4G USB receiver from its storage compartment on the back of the keyboard.
- Plug the 2.4G receiver into an available USB port on your computer.
- Set the mode switch on the back of the keyboard to '2.4G' or the appropriate position for 2.4G wireless mode.
- The keyboard should connect automatically.
3.2.3 Bluetooth Connection
- Set the mode switch on the back of the keyboard to 'Bluetooth' or the appropriate position for Bluetooth mode.
- On your device (PC, laptop, phone), enable Bluetooth and search for new devices.
- Select 'ENZO6081' from the list of available devices to pair.
- Follow any on-screen prompts to complete the pairing process.
3.3 Initial Charging
The keyboard is equipped with a 4000mAh battery. For optimal performance, it is recommended to fully charge the keyboard before first use. Connect the keyboard via the USB Type-C cable to a power source (computer USB port or USB wall adapter). The backlight will indicate charging status (usually a specific color or animation) and change when fully charged.
3.4 Driver Software Installation
For advanced customization of backlighting, key remapping, and macros, download the official customized drivers from the manufacturer's website. Install the software on your Windows PC to access the full range of features.

4. Operating Instructions
4.1 Basic Key Functions
The ENZO6081 features an 81-key layout with full N-key rollover, ensuring all key presses are registered accurately, even during rapid typing or gaming. Standard alphanumeric and function keys operate as expected.
4.2 Multimedia Knob
The independent metal knob located on the top right of the keyboard provides convenient control over multimedia functions. Typically, it controls volume (rotate) and play/pause (press).
4.3 Backlight Control
The keyboard features RGB backlighting with multiple effects and colors. Use the driver software for comprehensive customization. Specific key combinations (often Fn + arrow keys or other designated keys) can cycle through lighting modes, adjust brightness, and change colors directly on the keyboard.
4.4 Switching Between Devices
If you have paired the keyboard with multiple Bluetooth devices, you can typically switch between them using specific Fn key combinations (e.g., Fn + 1, Fn + 2, Fn + 3 for different Bluetooth profiles). Refer to the driver software or quick start guide for exact key bindings.
5. Maintenance
5.1 Cleaning
To clean your keyboard, first disconnect it from all power sources. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. For keycaps, you can use the provided keycap puller to remove them and clean them separately with warm soapy water. Ensure they are completely dry before reattaching. Use compressed air to remove dust and debris from between the keys. The keyboard is designed to be waterproof/dustproof, offering some protection against spills, but it is not fully submersible.
5.2 Switch Replacement (Hot-swappable)
The ENZO6081 features full key hot-swappable sockets, allowing you to change switches without soldering. Use the provided switch puller to carefully remove existing switches. Align the pins of the new 3-pin or 5-pin switch with the holes on the PCB and press firmly until it clicks into place. Ensure the pins are not bent during installation.

5.3 Keycap Replacement
Use the provided keycap puller to gently remove keycaps. To install new keycaps, align them with the switch stem and press down firmly. The PBT plastic keycaps are durable and feature dye-sublimated characters for longevity.
6. Troubleshooting
6.1 Keyboard Not Responding
- Wired Mode: Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless Mode: Ensure the 2.4G receiver is plugged in and the keyboard is set to 2.4G mode. Try re-pairing by unplugging and replugging the receiver.
- Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is paired. Try unpairing and re-pairing the keyboard. Check if the keyboard is connected to the correct Bluetooth profile (if multiple are stored).
- Battery: Check the battery level. Connect the keyboard via USB-C to charge it.
6.2 Specific Keys Not Working
- Due to the hot-swappable design, a switch might be improperly seated or faulty. Use the switch puller to remove the problematic switch and re-insert it firmly. If the issue persists, try replacing it with one of the spare switches provided.
- Check for debris under the keycap or switch.
6.3 Backlight Issues
- Ensure the backlight is enabled via keyboard shortcuts or the driver software.
- Adjust brightness levels.
- If specific LEDs are not working, it might indicate a hardware issue.
6.4 Driver Software Not Detecting Keyboard
- Ensure the keyboard is connected via wired mode when using the driver software for initial setup or firmware updates.
- Restart your computer and the software.
- Reinstall the driver software.
7. Specifications

| Feature | Description |
|---|---|
| Model | ENZO6081 |
| Layout | 75% (81 Keys) |
| Structure | Gasket Mount |
| Connection Modes | Wired (Type-C), 2.4G Wireless, Bluetooth Wireless (Tri-mode) |
| Latency | Wired/2.4G: 2ms, Bluetooth: 6ms |
| Switches | Full Key Hot-swappable (Supports 3-pin and 5-pin switches) |
| Keycap Material | PBT plastic (Dye-sublimated) |
| Keycap Printing | Doublshot |
| Backlight | RGB (MULTICOLOR) |
| Battery Capacity | 4000mAh |
| Sound Dampening | 5 Layers (PO sandwich cotton, IXPE switch pad, PC acoustic pad, PO switch seat cotton, sound-absorbing silicone bottom pad) |
| PCB | 1.2mm Single-key Slotting PCB |
| Stabilizers | ENZO Customized Stabilizers (Factory Lubrication, Fine-tune Satellite Axis) |
| Upper/Lower Cover Material | ABS Plastic |
| Knob | Metal Multimedia Knob (CNC Machining, Anodized) |
| Compatibility | Desktop, Laptop, PC/Laptop/Phone (Win/iOS/MACos/Linux) |
| Features | Full Key Conflict Free (N-Key Rollover), Ergonomic Design, Waterproof/Dustproof |
| Dimensions | 325mm (Width) x 142mm (Height) x 30mm (Top Thickness) / 26mm (Bottom Thickness) |
| Weight | Approx. 0.80KG - 0.92KG |
| Certification | CE |
7.1 Available Switch Types and Characteristics

| Switch Type | Actuation Force | Bottom-out Force | Actuation Travel | Bottom-out Travel | Characteristic |
|---|---|---|---|---|---|
| Nut Axis | 42±5gf | 55±5gf | 1.5±0.2mm | 3.5±0.2mm | Entry-level Linear |
| Yulin Axis | 65±10gf | 60gf | 0.5mm | 3.8mm | Early Tactile |
| Wine-red Axis | 45±5gf | 55±5gf | 1.7±0.2mm | 3.6±0.3mm | Preferred Linear |
| Tofu Axis | 45±5gf | 52±5gf | 1.9±0.3mm | 3.5±0.5mm | Preferred Linear |
| Hyacinth Axis | 45±5gf | 50±5gf | 1.9±0.3mm | 3.5±0.3mm | Top-tier Linear |
8. Warranty and Support
The ENZO6081 keyboard comes with a 1-year maintenance warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in materials and workmanship under normal use. For warranty claims or technical support, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.
9. User Tips
- Experiment with Switches: Take advantage of the hot-swappable feature to try different switch types. The feel and sound can significantly impact your typing and gaming experience.
- Customize with Drivers: While the keyboard offers on-board controls, the official driver software provides granular control over RGB lighting effects, key remapping, and macro creation, allowing for a truly personalized setup.
- Battery Management: To prolong battery life, consider turning off the keyboard when not in use, especially in wireless modes. Adjusting backlight brightness can also help conserve power.
- Firmware Updates: Periodically check the manufacturer's website for firmware updates. These can improve performance, add new features, or fix bugs.