Product Introduction
Thank you for purchasing the Develuck waterproof backup camera. This camera is designed to enhance driving safety by providing a clear view of your vehicle's surroundings, helping to eliminate blind spots during parking and reversing maneuvers.
Image: Develuck AHD 1080P 170 Degree Rear View Camera with Fisheye Lens and Starlight Night Vision.
Key Features
- High Definition: Available in AHD 1080P (P31-E) or AHD 720P (P31-D) resolution.
- Wide Viewing Angle: 170° fisheye lens for a broad perspective.
- Starlight Night Vision: Provides clear visibility even in low-light conditions.
- Waterproof: IP68 rated for reliable performance in various weather conditions.
- Adjustable Angle: Camera body supports 360° rotation, 45° left/right, and 45° up/down adjustment.
- Flexible Installation: Can be mounted using adhesive tape or by drilling holes.
- Universal Compatibility: Works with monitors supporting RCA connectors.
Packing List
Please verify that all components are present before proceeding with installation.
Image: Components included in the 6M (19.7ft) version package.
6M (19.7ft) Version:
- Backup Camera (720P or 1080P)
- Camera Cable (6m/19.7ft)
- Screwdrivers and Screws
- User Manual (PDF available for download)
8M (26.2ft) Version:
- Backup Camera (720P or 1080P)
- Camera Cable (8m/26.2ft)
- Screwdrivers and Screws
- User Manual (PDF available for download)
If you require an 8m (26.2 ft) camera cable, please contact our service team via email: jenny@jansite.cn.
Setup and Installation
Follow these steps to properly install your backup camera:
- Pre-installation Check: Before starting the installation, ensure the backup camera is functioning correctly.
- Mounting Location: Mount the backup camera on a flat surface or near the license plate.
- Cable Connection: Connect the head unit (monitor) and the backup camera using the provided video cable.
- Android Monitor Trigger Wire (if applicable): If your head unit is an Android monitor, you must locate its trigger wire A and connect it to the camera's trigger wire B. Consult your head unit's supplier or a professional auto mechanic for assistance in finding the correct trigger wire A.
- Power Connection: Connect the red wire of the power cable to the reversing light's positive (+) terminal and the black wire to the vehicle's ground (GND).
- Initial Test: Start the vehicle, engage reverse gear, and test the camera installation.
- Finalization: Restart the head unit after successful installation.
Image: Comparison of adhesive tape installation (no drilling) versus traditional drilling methods.
Image: Detailed view of adhesive tape installation, showing how the camera can be mounted without damaging the car.
Image: Monitor wiring diagram illustrating connections for video cable, power cable, and trigger wires for Android head units.
Image: Conversion Line Control diagram showing connections for mirror control (Rear→Front), parking line switch, and signal control.
Cable Routing
Ensure video and power cables are routed away from hot areas such as the engine or exhaust pipes to prevent damage.
Operating Instructions
Camera Angle Adjustment
The camera body allows for precise adjustments to achieve the optimal viewing angle:
- 360° rotation
- 45° left and right adjustment
- 45° up and down adjustment
After adjusting the angle, use the provided screwdrivers to tighten the small screws and secure the lens in place.
Image: Diagram illustrating the 360° rotation and 45° tilt capabilities of the camera lens.
Image: Four simple steps to fix the lens, ensuring it remains in position during driving.
Video Signal Mode Selection (Wire Cutting)
The backup camera has switchable functions controlled by cutting specific wires. Always reboot the backup camera power after cutting any wire.
- Orange Wire: Controls the video signal mode.
- P31-D (AHD 720P): Default is CVBS mode. Cut the orange wire to switch to AHD 720P 25fps mode.
- P31-E (AHD 1080P): Default is AHD 1080P 25fps mode. Cut the orange wire to switch to CVBS mode.
- White Wire: Controls the mirror image. Cut the white wire to switch from mirror image (rear view) to original image (front view).
- Green Wire: Controls the parking line display. Cut the green wire to switch the reverse line from on to off.
Image: Diagram showing the orange, white, and green wires and their respective functions when cut.
Night Vision
The camera features Starlight Night Vision, allowing it to be used effectively even in very dark conditions.
Image: Example of the camera's display during night shooting, showing clear visibility with parking lines.
Video: Product overview demonstrating unboxing, installation, waterproof test, and day/night vision capabilities.
Maintenance
To ensure optimal performance and longevity of your backup camera, regular maintenance is recommended:
- Lens Cleaning: Regularly clean the camera lens to prevent accumulation of dust, water drops, snow, or other debris that could obstruct the view.
- Cable Inspection: Periodically check the video and power cables for any signs of wear, damage, or loose connections.
Image: The camera submerged in water, demonstrating its IP68 waterproof rating.
Troubleshooting
If you encounter issues with your backup camera, refer to the following common problems and solutions:
- No Image/Incorrect Image Display: If the reverse image is not displayed, or if it's blurry, flickering, or shows horizontal/vertical stripes:
- Verify that your head unit (monitor) supports the currently selected video signal mode (AHD 720P/1080P or CVBS).
- Check all wiring connections to ensure they are correct and secure.
- If you cut any color wires for function switching, ensure you have rebooted the camera's power.
- Parking Line Offset: The backup camera is designed for central mounting. If mounted on the side of the license plate, the reverse line may appear offset.
- Compatibility Issues: This is a universal camera for monitors with RCA connectors. If your monitor only supports specialized backup cameras, this product may not be compatible. Consult your monitor's dealer or manual for specific limitations.
Image: Screenshot of an Android monitor's 'Reversing system selection' menu, showing options for AHD and TVI resolutions and frame rates.
Image: Screenshot of an Android monitor's 'Frame' and 'Camera' settings, allowing selection between NTSC/PAL and various AHD/TVI resolutions.
Specifications
| Feature | Specification |
|---|---|
| Image Sensor | CCD/CMOS |
| Signal Format | CVBS/AHD (Optional) |
| Pixel (P31-D) | AHD 1280*720, CVBS 1280*720 |
| Pixel (P31-E) | AHD 1920*1080, CVBS 1280*720 |
| Viewing Angle | 170° |
| Night Vision | Starlight Night Vision |
| Mirror Control | Supported (via wire cutting) |
| Guiding Line | Supported (via wire cutting) |
| Power Supply | DC 12V-24V |
| Working Temperature | -30°C ~ +85°C (-22°F ~ +185°F) |
| Humidity | Max 95% |
| White Balance | Auto |
| Automatic Gain Control | Auto |
| Black Light Compensation | Auto |
| Waterproof Grade | IP68 |
| Lens Material | Glass |
| Shell Material | Aluminium alloy |
| Wire or Wireless | Wire |
| Video Cable Length | 6M (Optional 8M) |
| Certification | CE |
User Tips
- Monitor Compatibility: Before purchasing or installing, always verify that your existing monitor or head unit supports the specific video signal mode (AHD 720P/1080P or CVBS) of the camera you intend to use. If your monitor only supports specialized cameras, this universal camera might not be compatible.
- Android Head Unit Setup: For Android monitors, remember to locate and connect the head unit's trigger wire A to the camera's trigger wire B for proper functionality.
- Cable Length: If the standard 6m cable is insufficient for your vehicle, an 8m cable option is available. Contact customer support for details.
- Function Customization: Utilize the wire-cutting feature to customize mirror image and parking line display according to your preference. Remember to power cycle the camera after cutting any wires.
Warranty and Support
This product comes with a 12-month warranty from the date of purchase.
For any questions, problems, or technical support during use, please contact our service team via email at jenny@jansite.cn. We are committed to providing a prompt response and assisting you with any issues.
A detailed user manual in PDF format is also available for download. Please scan the QR code provided in the packaging for electronic instructions and related operation videos.
