1. Introduction
The TKLBLS Z-6 Professional 6-Channel 99DSP Audio Mixer is a versatile and high-fidelity audio mixing console designed for various applications including studio recording, live broadcasting, karaoke, DJ performances, and conferences. It features 6 input channels, a built-in 99 DSP effects processor, 48V phantom power, USB connectivity for computers, and Bluetooth 5.0 for wireless audio streaming. This manual provides detailed instructions for setting up, operating, and maintaining your mixer to ensure optimal performance.

2. Key Features
- 6-Channel Input: Multiple input options for microphones and line-level devices.
- 99 DSP Digital Effects: Integrated effects processor with 99 presets including Reverb, Delay, Flanger, Chorus, Echo, Voice Changer, Tremolo, and Rotary Speaker.
- 48V Phantom Power: Provides power for condenser microphones on all MIC/LINE input channels.
- USB Audio Interface: Direct connection to a computer for recording, playback, and live streaming.
- Bluetooth 5.0 Connectivity: Seamless wireless audio streaming from compatible devices.
- Flash Drive Playback: Supports MP3/U disk/SD card playback for background music or pre-recorded tracks.
- Low Cut Button (HPF): Attenuates frequencies below 80Hz to reduce unwanted noise from microphones.
- High-Fidelity Audio Processing: Equipped with a DSP intelligent chip for lower noise and improved sound restoration.
- 3-Band Equalization: Independent Treble, Tenor (Mid), and Bass adjustment knobs for each channel.
- Individual Channel Controls: Gain, Pan, Peak indicator, and Level faders for precise control over each input.
- Monitoring Options: Dedicated PHONES output for headphone monitoring.
- Robust Construction: Durable design suitable for various environments.


3. Setup Instructions
3.1 Unpacking and Inspection
Carefully unpack the mixer and all accessories. Inspect for any signs of damage. Retain the packaging for future transport or storage.
3.2 Power Connection
- Ensure the mixer's power switch is in the "OFF" position.
- Connect the included DC power adapter to the "DC 12V" power input on the rear of the mixer.
- Plug the power adapter into a suitable electrical outlet. The mixer operates on 12V DC power, supplied by an external AC-to-DC adapter (compatible with 120V AC, 60Hz for USA/Canada; 240V AC, 50Hz for UK/Australia; 220V AC, 50Hz for China).
- Turn the power switch to "ON". The power indicator will illuminate.

3.3 Connecting Microphones and Instruments
- Connect microphones to the MIC/LINE input jacks (XLR or 1/4" TRS) on the desired channels.
- For condenser microphones requiring phantom power, ensure the 48V PHANTOM switch is engaged. This switch provides +48V DC to all XLR microphone inputs.
- Connect line-level instruments (e.g., keyboards, guitars with preamps) to the 1/4" TRS LINE inputs.
- Use the PAD button (if available on the channel) to attenuate high-level signals by 26dB, preventing distortion.
- Engage the HPF (High-Pass Filter) button to activate the low-cut filter, reducing frequencies below 80Hz.

3.4 Connecting to a Computer (USB)
- Connect a USB cable from the mixer's USB port to an available USB port on your computer.
- The mixer will be recognized as an audio device by your computer's operating system.
- Select the mixer as your input/output device in your computer's sound settings or your Digital Audio Workstation (DAW) software.

3.5 Output Connections
- Stereo Out: Connect your main speakers or power amplifier to the STEREO OUT (XLR or 1/4" TRS) jacks.
- PHONES: Connect headphones to the PHONES jack for monitoring.
- FX SEND / AUX SEND: Use these outputs to send signals to external effects processors or monitor mixes.

4. Operation
4.1 Channel Controls
Each input channel features the following controls:
- GAIN Knob: Adjusts the input sensitivity for the microphone or line input. Set this to achieve a strong signal without clipping (PEAK light should not illuminate constantly).
- TREBLE Knob: Adjusts high frequencies (10kHz +/-15dB).
- TENOR Knob (MID): Adjusts mid frequencies (2.5kHz +/-15dB).
- BASS Knob: Adjusts low frequencies (80Hz +/-15dB).
- PAN Knob: Controls the stereo positioning of the channel's signal.
- PEAK Indicator: Lights up when the input signal is too high, indicating potential clipping. Reduce the GAIN if this light is frequently on.
- LEVEL Fader: Adjusts the overall volume of the channel in the main mix.

4.2 DSP Effects
The mixer includes 99 built-in digital signal processing (DSP) effects.
- Use the PROGRAM Knob to select one of the 99 effects. The selected effect number will be displayed.
- Use the PARAMETER Knob to adjust the specific parameters of the chosen effect (e.g., decay time for reverb, delay time for delay).
- Adjust the EFFECTS Level Knob to control how much of the effect is applied to the main mix.
Effect List (00-99):
- 00-39: Reverb
- 40-49: Delay
- 50-59: Pingpong Delay
- 60-69: Flanger
- 70-79: Key Echo
- 80-84: Chorus + Echo
- 85-89: Auto Wah + Echo
- 90-93: Voice Changer
- 94-96: Tremolo
- 97-99: Rotary Speaker

4.3 Digital Audio Player (USB/Bluetooth/SD Card)
The built-in digital audio player supports USB flash drives, SD cards, and Bluetooth audio.
- USB/SD Card Playback: Insert a USB flash drive or SD card into the respective slot. Use the MODE button to select USB/SD mode. Use PREV/NEXT buttons to navigate tracks and PLAY/PAUSE for playback control.
- Bluetooth 5.0:
- Press the MODE button until "Bluetooth" or "BT" is displayed.
- On your mobile device, search for available Bluetooth devices and select "TKLBLS Mixer" (or similar).
- Once paired, you can stream audio wirelessly to the mixer.


4.4 Main Mix and Monitoring
- STEREO Fader: Controls the overall output volume of the main stereo mix.
- Level Display: The LED meter displays the output level of the main mix. Aim for levels that are strong but do not consistently peak into the red.
- PHONES Level Knob: Adjusts the volume for the headphone output.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the mixer's surface. Avoid abrasive cleaners or solvents.
- Liquid Exposure: Do not expose the mixer to liquids. If liquid spills occur, immediately disconnect power and allow the unit to dry completely before use.
- Storage: Store the mixer in a cool, dry place away from direct sunlight and extreme temperatures.
- Ventilation: Ensure proper ventilation around the mixer to prevent overheating.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected, power switch off, faulty outlet. | Check power connections, ensure switch is ON, try a different outlet. |
| No sound output | Main STEREO fader down, channel LEVEL faders down, incorrect output connection, muted device. | Increase STEREO and channel LEVEL faders. Verify output cables are correctly connected to speakers/amplifier. Check if connected devices are muted. |
| Sound is very low | GAIN knob too low, channel LEVEL fader too low, incorrect input sensitivity. | Increase GAIN for the input channel until the PEAK light flashes occasionally. Increase channel LEVEL fader. Ensure PAD button is not engaged unnecessarily. |
| Distorted sound | GAIN knob too high, PEAK light constantly on, PAD button not engaged for high-level inputs. | Reduce GAIN for the input channel. Engage PAD button for very loud sources. |
| DSP effects not working | Effect not selected, EFFECTS Level knob too low, PARAMETER knob at minimum. | Ensure an effect is selected with the PROGRAM knob. Increase the EFFECTS Level knob. Adjust the PARAMETER knob. |
| Bluetooth connection issues | Mixer not in Bluetooth mode, device not paired, interference. | Press MODE button to select Bluetooth. Ensure your device's Bluetooth is on and paired. Move closer to the mixer. |
| USB playback/recording issues | Incorrect USB mode, computer not recognizing mixer, driver issues (rare). | Ensure mixer is in USB mode. Check computer's sound settings. Restart computer and mixer. |
7. User Tips
- Computer Connection: The mixer functions as a sound card when connected to a computer via USB, making it compatible with DAWs like Cubase for recording and playback.
- Microphone Compatibility: The 48V phantom power ensures compatibility with a wide range of condenser microphones, in addition to dynamic and wired microphones.
- Versatile Applications: This mixer is suitable for various scenarios, including home studio recording, live streaming, small venue performances, and public speaking events.


8. Specifications
| General | |
|---|---|
| Model Number | Z-6 |
| Type | Mixer |
| Dimensions (L x W x H) | 23.4 cm x 21.2 cm x 4.9 cm |
| Net Weight | 1 kg |
| Power Source | DC 12V (via included AC-to-DC adapter) |
| Inbox Adaptor | Yes (US Plug type) |
| Certification | CE |
| Audio Performance | |
| TRIM Range | 0dB to +10dB |
| Line Input | Electronically balanced |
| Bandwidth | 10 Hz to 60kHz ±3dB |
| Distortion (THD & N) | 0.01% at 4 dBu, 1kHz, Bandwidth 80 kHz |
| Line Level Range | +10dBu to -40dBu |
| Equalization | |
| Hi Shelving | 10kHz +/-15dB |
| Mid Range | 2.5kHz+/-15dB |
| Lo Shelving | 80Hz+/-15dB |
| Master Mix Section | |
| Max Output | +22 dBu balanced |
| Control Room Out | +22 dBu unbalanced |
| Signal-To-Noise Ratio | 112dB, all channels at Unity Gain |

9. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.