1. Introduction
Thank you for choosing the Heimerdinger 6 Inch Brushless Cordless Circular Saw, Model LB295. This powerful and versatile tool is designed for efficient and precise cutting of various materials, including wood, PVC, MDF, stone, and ceramic tiles. Featuring a brushless motor, adjustable cutting depth and angle, and a self-locking switch for safety, this saw is an essential addition to any renovation team or DIY enthusiast's toolkit. Please read this manual thoroughly before operation to ensure safe and effective use of your new circular saw.
2. General Safety Instructions
WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
- Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
- Personal Safety: Always wear eye protection. Use safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection for appropriate conditions. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
- Power Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
- Circular Saw Specific Safety:
- Keep hands away from cutting area and the blade. Keep your second hand on the auxiliary handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade.
- Do not reach underneath the workpiece. The guard cannot protect you from the blade below the workpiece.
- Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade should be visible below the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Always use blades of correct size and shape (diamond as opposed to round) with correct size arbor holes.
- Never use damaged or incorrect blade washers or bolt.
3. Package Contents
The contents of your package will vary depending on the option purchased. Please verify all components upon receipt.
Common Components:
- 1 x Electric Circular Saw (Model LB295)
- 1 x Saw Blade
- 1 x User Manual
- Accessories (e.g., wrench, guide ruler)
Option 1: Saw Body Only

Includes saw body, saw blade, user manual, and accessories. Battery and charger are NOT included. Compatible with BL1830, BL1840, BL1850, BL1860 batteries, and all Heimerdinger 18V LB5C batteries (2.0Ah, 4.0Ah, 6.0Ah, 7.5Ah, 9.0Ah).
Option 2: Saw with One 4.0Ah Battery

Includes saw body, one 18V 4.0Ah battery, one 18V charger, saw blade, user manual, and accessories.
Option 3: Saw with One 6.0Ah Battery

Includes saw body, one 18V 6.0Ah battery, one 18V charger, saw blade, user manual, and accessories.
Option 4: Saw with One 9.0Ah Battery

Includes saw body, one 18V 9.0Ah battery, one 18V charger, saw blade, user manual, and accessories.
Option 5: Saw with Two 4.0Ah Batteries

Includes saw body, two 18V 4.0Ah batteries, one 18V charger, saw blade, user manual, and accessories.
Option 6: Saw with Two 6.0Ah Batteries

Includes saw body, two 18V 6.0Ah batteries, one 18V charger, saw blade, user manual, and accessories.
Option 7: Saw with Two 9.0Ah Batteries

Includes saw body, two 18V 9.0Ah batteries, one 18V charger, saw blade, user manual, and accessories.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | LB295 |
| Brand Name | Heimerdinger |
| Power Source | Battery (18V) |
| Motor Type | Brushless |
| Wattage | 1000-1299W |
| No-Load Speed | 6800 rpm |
| Saw Blade Diameter | 152 mm (6 inches) |
| Max. Cutting Depth | 35-50mm |
| Adjustable Angle | 0° to 45° |
| Weight (body) | 2.5kg |
| Application | Wood Saw, Renovation Team (suitable for wood, PVC, MDF, stone, ceramic tiles, metal cutting) |
5. Setup
5.1. Battery Installation
- Ensure the saw is turned off and the trigger is locked.
- Align the battery pack with the battery port on the saw handle.
- Slide the battery pack into the port until it clicks securely into place.
- To remove, press the release button on the battery pack and slide it out.
5.2. Blade Installation
- Ensure the saw is disconnected from the battery.
- Locate the blade guard and the arbor lock button.
- Press and hold the arbor lock button to prevent the arbor from rotating.
- Using the provided wrench, loosen the arbor nut by turning it counter-clockwise.
- Remove the outer flange and the old blade (if applicable).
- Place the new 6-inch saw blade onto the arbor, ensuring the teeth are pointing in the direction of rotation indicated by the arrow on the saw.
- Replace the outer flange and tighten the arbor nut clockwise with the wrench while holding the arbor lock button. Do not overtighten.
- Release the arbor lock button and check that the blade rotates freely.

Image: Saw blade, wrench, and guide ruler for installation.
5.3. Adjusting Cutting Depth
- Ensure the saw is disconnected from the battery.
- Locate the depth adjustment lever/knob on the side of the saw.
- Loosen the lever/knob.
- Raise or lower the saw base plate to achieve the desired cutting depth. The saw allows for 0-4CM (0-40mm) adjustable cutting depth.
- Tighten the lever/knob securely to lock the depth setting.

Image: Close-up showing the 0-45° adjustable cutting angle and 0-4CM adjustable cutting depth scales.
5.4. Adjusting Cutting Angle (Bevel)
- Ensure the saw is disconnected from the battery.
- Locate the angle adjustment lever/knob on the front of the saw.
- Loosen the lever/knob.
- Tilt the saw base plate to the desired cutting angle. The saw allows for 0-45° adjustable cutting angle.
- Tighten the lever/knob securely to lock the angle setting.

Image: Circular saw demonstrating multi-angle adjustable cutting for effortless operation.
6. Operating Instructions
6.1. General Operation
- Secure Workpiece: Always clamp or otherwise secure the workpiece to a stable surface. Never hold it by hand.
- Power On: To start the saw, press the self-locking button (usually yellow) and then squeeze the trigger switch. The self-locking button prevents accidental startup.
- Starting the Cut: Allow the blade to reach full speed before engaging the workpiece.
- Guiding the Saw: Maintain a firm grip on both handles. Guide the saw smoothly through the material, letting the blade do the work. Do not force the saw.
- Finishing the Cut: Once the cut is complete, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.

Image: Close-up of the saw highlighting circulation cooling, the upgraded chip removal port, and the self-locking switch for safety.
6.2. Cutting Different Materials
This multifunctional circular saw is suitable for cutting a variety of materials.
- Wood Cutting: Use appropriate wood-cutting blades. The saw can be used for solid wood, board cutting, and inverted cutting.

Image: The circular saw performing a wood cut, demonstrating its versatility.
- Stone Cutting: Use appropriate diamond blades for stone or ceramic tiles.

Image: The circular saw cutting stone tiles, showcasing its capability for hard materials.
- Metal Cutting: Use appropriate metal-cutting blades.

Image: The circular saw cutting metal sheets, highlighting its multi-material functionality.
6.3. Key Features in Use
- Walking Protective Cover: The automatic rebound protective cover ensures safety during operation by covering the blade when not in use.
- Chip Removal Port: The upgraded chip removal port efficiently removes debris, preventing splashing and keeping the cutting line clear.
- Flip Saw Functionality: The saw can transform into a flip saw for easy conversion and flexible use, reserving flip holes for enhanced versatility.

Image: The circular saw shown in a 'flip saw' configuration, demonstrating its adaptability.
Video: Product demonstration showing the circular saw in action, cutting various materials and highlighting its features.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your circular saw.
- Cleaning: After each use, disconnect the battery and clean the saw. Use a brush or compressed air to remove sawdust and debris from the motor vents, blade guard, and base plate. Do not use solvents that could damage plastic parts.
- Blade Care: Inspect the saw blade for sharpness and damage before each use. Replace dull or damaged blades immediately. Clean resin and pitch buildup from the blade using a suitable blade cleaner.
- Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store batteries in a discharged state for extended periods. Follow the charging instructions provided with your charger.
- General Inspection: Periodically check all screws and fasteners for tightness. Ensure the blade guard operates smoothly and returns to its closed position automatically.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not start | Battery not inserted correctly or discharged; Self-locking button not pressed; Faulty switch | Ensure battery is fully charged and properly inserted. Press the self-locking button before squeezing the trigger. If problem persists, contact support. |
| Blade not cutting efficiently | Dull or incorrect blade; Incorrect cutting depth; Saw being forced | Replace with a sharp, appropriate blade for the material. Adjust cutting depth. Allow the saw to work at its own pace. |
| Excessive vibration or noise | Loose blade or components; Damaged blade; Worn motor bearings | Check blade for tightness and damage. Inspect other components for looseness. If problem persists, contact support. |
| Saw overheats | Overloading the motor; Blocked ventilation slots | Avoid continuous heavy cutting. Clear all ventilation slots. Allow the saw to cool down. |
9. User Tips
- Battery Compatibility: This saw is designed to be compatible with Makita-style 18V batteries (e.g., BL1830, BL1840, BL1850, BL1860) as well as Heimerdinger's own 18V LB5C series batteries (2.0Ah, 4.0Ah, 6.0Ah, 7.5Ah, 9.0Ah). Ensure you use a compatible battery for optimal performance and safety.
- Blade Selection: Always choose the correct blade type for the material you are cutting (e.g., wood, metal, ceramic). Using the wrong blade can lead to poor cuts, damage to the saw, and safety hazards.
- Practice Cuts: If you are new to circular saws or cutting a new material, make practice cuts on scrap material to get a feel for the tool and ensure your settings are correct.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact Heimerdinger customer service. Keep your purchase receipt as proof of purchase.