1. Introduction
The Satlink WS-6933 is a compact and portable DVB-S2 digital satellite finder meter designed to assist in the quick and accurate alignment of satellite dishes. It features a 2.1-inch LCD screen for clear signal readings, supports C&KU band reception, and includes essential functions like signal strength and quality measurement, BER, PWR, DiSEqC 1.0/1.1, and 22kHz tone support. Its integrated Li-ion battery provides up to 3 hours of operation, making it ideal for field use.
2. Package Contents
Ensure all the following items are present in your package:
- 1 x Satlink WS-6933 Satellite Finder Meter
- 1 x Silicone Case
- 1 x USB Cable
- 1 x Power Adapter (EU Plug, US Plug, UK Plug, or AU Plug depending on region)
- 1 x User Manual

3. Product Overview
The Satlink WS-6933 is designed for ease of use with a clear display and intuitive controls. Below are the key components and their functions.
3.1 Front Panel

- 2.1 Inch LCD Screen: Displays menu, signal parameters (strength, quality, BER, PWR), and other operational information.
- Control Buttons: Navigation (Up, Down, Left, Right), OK (confirm), RETURN (back/exit).
- LED Indicators: Power, 22KHz, 13V, 18V, Lock, Charge. These indicate the status of LNB power, 22KHz tone, signal lock, and battery charging.
- Integrated Compass: Helps in initial dish orientation.
3.2 Side and Top Panels


- DC Input: For connecting the 12V/1.2A power adapter to charge the device.
- USB Port: Used for software upgrades.
- F-Connector: Connects to the LNB (Low Noise Block) on your satellite dish.
- Power Switch: Turns the device ON/OFF.
3.3 Bottom Panel

- Flashlight: Provides illumination in low-light conditions, useful during dish alignment.
4. Specifications
Detailed technical specifications for the Satlink WS-6933:
| Feature | Specification |
|---|---|
| Display | 2.1 Inch LCD Screen |
| Input Frequency | 950~2150MHz |
| Input Level | -65~ -25dBm |
| Input Impedance | 75 ohm |
| Measurement Type | Signal Strength, Quality, BER (Bit Error Rate), PWR (Power) |
| Signal Locking | Sound for Locking Signal |
| DiSEqC Support | DiSEqC 1.0 / 1.1 and 22kHz Tone |
| LNB Power Supply | 18V/13V (IMax 300mA) |
| Beep | Integrated |
| Battery | 7.4V/800mAh Li-ion Battery (Included) |
| Max Operating Time | 3 hours |
| Power Adapter | 12V/1.2A DC Adapter |
| USB Port | For Software Upgrades |
| Type | DIGITAL |
| FTA (Free To Air) | Yes |
| Certification | CE |
| Origin | Mainland China |
| Package | Yes |
| With USB Wifi | No |
| High-concerned chemical | None |
5. Setup
Follow these steps to prepare your Satlink WS-6933 for use:
5.1 Charging the Device
- Connect the provided power adapter to the DC input port on the side of the WS-6933.
- Plug the power adapter into a suitable electrical outlet.
- The 'Charge' LED indicator on the front panel will illuminate during charging. Allow the device to charge fully before first use (approximately 3 hours for a full charge).
- Disconnect the charger once fully charged or when operating on battery power.
5.2 Initial Connection
- Ensure the satellite finder is turned OFF using the power switch on the top panel.
- Connect the coaxial cable from your LNB (on the satellite dish) to the F-connector input on the top panel of the WS-6933.
- If you are using an external receiver, ensure it is disconnected from the LNB during this process.
6. Operating Instructions
This section guides you through the basic operation of the Satlink WS-6933 to align your satellite dish.
6.1 Powering On and Menu Navigation
- Turn ON the device using the power switch. The LCD screen will light up, displaying the main menu.
- Use the Up/Down arrow buttons to scroll through menu options.
- Use the Left/Right arrow buttons to change values or navigate within sub-menus.
- Press the 'OK' button to select an option or confirm a setting.
- Press the 'RETURN' button to go back to the previous menu or exit a function.
6.2 Satellite Selection and Signal Finding
- From the main menu, navigate to 'Sat Setting' or 'Signal Scan' (menu names may vary slightly).
- Select the desired satellite from the pre-programmed list. If your satellite is not listed, you may need to add it manually or update the device software.
- Ensure the correct LNB type and frequency settings are selected for your satellite.
- The device will display signal strength and quality readings. The 'Power', '13V', '18V', and '22KHz' LEDs will indicate the LNB power supply and 22KHz tone status.
- Slowly adjust your satellite dish's azimuth (horizontal) and elevation (vertical) until the signal strength and quality readings on the LCD are maximized. The integrated compass can help with initial azimuth alignment.
- A 'Lock' LED and an audible beep will indicate when a satellite signal is successfully locked. Aim for the highest possible signal quality for optimal reception.
- The device also displays BER (Bit Error Rate) and PWR (Power) values, which are crucial for fine-tuning. Lower BER and higher PWR generally indicate a better signal.
6.3 DiSEqC and 22KHz Tone
- The WS-6933 supports DiSEqC 1.0 and 1.1 for controlling multiple LNBs or switches. Configure these settings in the 'Sat Setting' menu if your setup requires them.
- The 22KHz tone is used to switch between high and low bands of a universal LNB. The '22KHz' LED will indicate if the tone is active.
6.4 Software Upgrades
The USB port is provided for future software upgrades. Refer to the manufacturer's website for the latest firmware and instructions on how to perform an upgrade.
6.5 Using the Flashlight
The integrated flashlight can be activated from the menu or via a dedicated button (if available) to assist in dark environments during dish alignment.
7. Maintenance
Proper care and maintenance will extend the life of your Satlink WS-6933.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or solvents.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use, to maintain battery health. Store in a cool, dry place.
- Software Updates: Periodically check the manufacturer's website for software updates to ensure optimal performance and compatibility with new satellite parameters.
- Storage: When not in use, store the device in its silicone case to protect it from dust and minor impacts.
8. Troubleshooting
If you encounter issues with your Satlink WS-6933, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery or faulty power switch. | Charge the device fully. Ensure the power switch is firmly in the ON position. |
| No signal detected | Incorrect satellite selected, LNB not powered, faulty cable, or dish misalignment. | Verify satellite settings. Check LNB power indicators (13V/18V). Inspect coaxial cable for damage. Re-align dish slowly. |
| Low signal strength/quality | Minor dish misalignment, LNB not optimal, or weather interference. | Fine-tune dish alignment. Check LNB skew. Wait for clear weather conditions. |
| Battery not charging | Faulty adapter, cable, or charging port. | Ensure adapter and USB cable are securely connected and undamaged. Try a different power outlet. |
| Screen frozen or unresponsive | Software glitch. | Turn off the device, wait a few seconds, then turn it back on. If the issue persists, consider a software upgrade. |
9. User Tips
- Slow and Steady: When aligning the dish, make very small, slow adjustments. The meter needs a moment to update its readings.
- Peak Signal: Don't just aim for a signal; aim for the highest possible signal quality. This provides a more stable and reliable connection.
- Compass Use: The integrated compass is a good starting point for azimuth, but always fine-tune using the signal readings on the meter. Magnetic interference can affect compass accuracy.
- Firmware Updates: Regularly check for firmware updates from the manufacturer. These can improve performance, add new features, or fix bugs.
- Silicone Case: Always use the provided silicone case to protect the device from drops and environmental elements, especially when working outdoors.
10. Warranty and Support
The Satlink WS-6933 comes with a 12-month manufacturer's limited warranty for defective items, excluding items damaged and/or misused after receipt. For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.