Retekess TA006

Contents

Retekess TA006 Wireless TV Headphone User Manual

Model: TA006

Introduction

The Retekess TA006 Wireless TV Headphone system allows you to enjoy television audio without disturbing others. It features a wireless transmitter dock that connects to your TV and a comfortable, rechargeable headphone. This manual provides detailed instructions for setting up, operating, and maintaining your TA006 system.

Features

  • Work with all TV sets, including the latest Smart TVs.
  • Watch TV without disturbing others.
  • Easy to set up, charge, and use.
  • Work up to 10 hours on a full charge.
  • Wireless range: Up to 100 feet (30 meters).
  • Adjustable volume.
  • Can also be used as wired headphones.
  • All connecting cables are included.
  • One transmitter can be connected to multiple headphones.
  • Automatic power on/off: Headphones automatically turn on when removed from the charging base and turn off if no signal is detected within 10 minutes.
  • Clear screen display on the transmitter shows battery percentage and interface type.
  • Supports Optical/Coaxial/3.5 AUX/AUX+RCA connection methods.
  • Perfectly synced audiovisual experience with no lip-sync lag.
  • Independent volume control on the headphones allows individual volume adjustment without affecting other users.

Package Contents

Please check the box for the following items:

Contents of the Retekess TA006 package including headphones, charging base, cables, and manual.
  • 1x TA006 Wireless TV Headphone
  • 1x Charging Base
  • 1x User Manual
  • 1x Fiber Optic Cable
  • 1x Charging Adapter
  • 1x Type-C Charging Cable
  • 1x Coaxial Cable
  • 1x Audio Cable (3.5mm AUX)
  • 1x RCA Cable

Product Overview

Transmitter Dock

Diagram of the transmitter dock showing input ports: OFF-CH1-CH2 switch, OPT-IN, COAX-IN, AUX-IN, DC-5V/1A power input.
  1. OFF-CH1-CH2 Switch
  2. OPT-IN (Optical Input)
  3. COAX-IN (Coaxial Input)
  4. AUX-IN (3.5mm Audio Input)
  5. DC-5V/1A (Power Input)

TV Wireless Headphones

Diagram of the wireless headphones showing controls: ON/OFF/TUNE, Volume +/-, 3.5mm audio jack, USB-C charging port, and charging contacts.
  1. ON/OFF/TUNE Button
  2. Volume + Button
  3. Volume - Button
  4. 3.5mm Audio Jack
  5. USB-C Charging Port
  6. Charging Contacts

Setup

  1. Powering the Transmitter Dock: Plug the included AC adapter into the DC 5V jack of the transmitter dock. Then plug the other end into an AC outlet.
  2. Select Channel: Slide the OFF-CH1-CH2 switch on the back of the transmitter dock to either the CH1 or CH2 position.
  3. Power On Confirmation: When the transmitter dock is powered on, the LCD screen will light up and display "PWR".

Charging Your Headphones

Ensure the transmitter dock is plugged in and powered on.

Charging via the Charging Base

Place the headphones correctly onto the charging dock of the transmitter. The LCD screen on the transmitter dock will light up, displaying a battery icon and the headphones' battery level (percentage).

Headphones charging on the base, with the display showing '87% CHRG'.

Charging via USB Cable

Alternatively, you can charge the headphones directly using the included Type-C charging cable. Connect one end to the USB-C charging port on the headphone and the other end to a USB power source.

Video demonstrating charging methods and display screen.

Connecting to Your TV

The transmitter can be connected to your TV in 4 different ways. Ensure your TV is not muted.

Diagram showing the back of the transmitter dock with various audio input options: Optical, Coaxial, AUX, and AUX+RCA.

Method 1: Using the TV's Headphone Jack

  1. Connect one end of the 3.5mm audio cable to the AUX-IN socket on the rear of the transmitter.
  2. Connect the other end of the 3.5mm audio cable to your TV's headphone jack.
  3. Set your TV speaker output to "Headset" if applicable.

Method 2: Using RCA Red and White Audio Output

  1. Connect the RCA 3.5mm adapter cable to the RCA Audio Out jacks (red and white) on your TV.
  2. Connect the 3.5mm audio cable to the RCA adapter cable, and plug the other end of the 3.5mm cable into the AUX-IN jack of the transmitter.
  3. Ensure you use the red/white ports marked "Audio Out" on your TV.
  4. Set your TV speakers to "External Speakers".

Method 3: Using the Optical Output on TV

  1. Plug the included optical cable into the corresponding optical jack on your TV.
  2. Connect the other end of the optical cable to the OPT-IN (fiber optic input) of the transmitter.
  3. Ensure your TV speakers are set to "External Speakers".
  4. Set your TV audio format to "PCM" and turn off "Dolby/DTS" (this is very important).
  5. Ensure the audio source sampling rate does not exceed 16bit / 48KHz.
  6. Note: When using the optical output, please unplug any device from the 3.5mm AUX jack.

Method 4: Using the Coaxial Interface on TV

  1. Connect the included 1M coaxial adapter cable to the COAXIAL jack on your TV.
  2. Plug the other end of the cable into the COAX-IN jack of the transmitter.
  3. If there is no sound, refer to the troubleshooting section.

Operating the TV Wireless Headphones

Automatic Operation

When the headphones are stored and being charged in the transmitter dock, simply take them out. The headphones will automatically turn on and connect within 5 seconds.

Manual Power On/Off

If necessary, you can hold the ON/OFF/TUNE button for 3 seconds to manually turn the headphones on or off.

Adjusting Fit and Volume

Put the headphones on your head. Adjust the length of the headband for a comfortable fit. Adjust the volume using the "V+" and "V-" buttons on the headphones.

Switching Channels (if interference occurs)

If you experience any interference, you can choose between 2 available frequencies by sliding the OFF-CH1-CH2 button on the transmitter dock. Then, press the ON/OFF/TUNE button on your headphones to connect to the selected channel.

Automatic Shutoff

To protect the battery, if no signal is detected for 10 minutes, the headphones will automatically turn off. If the battery power drops below 3.2V, an alarm will beep, and the headphones will turn off automatically. In this case, return them to the charging dock.

Wired Headphones Use

The TA006 headphones can also be used as wired headphones for various purposes (e.g., with a smartphone, tablet, laptop, MP3 player).

  1. Connect the included 3.5mm audio cable to the AUX jack on the headphones.
  2. Plug the other end into your mobile device or audio source.

Note: In wired mode, you will not be able to adjust the volume using the volume buttons on the headphones.

Specifications

ParameterTransmitterHeadphones
FrequencyEU: 863-865MHz, US: 915MHz
VoltageDC 5V3.7V (450mAh built-in rechargeable battery)
Working Current80mA55mA
Modulation50KHz
ModeStereo
Regulated50 kHz
Working Range100 feet (30 meters)
Charging Time4 hours
Working TimeAbout 8 hours
S/N Ratio≥60dB
Distortion<1%
Frequency Response60-15000Hz

Troubleshooting (FAQ)

Why am I not hearing any sound from the headphones?

  • Make sure the headphones are tuned to the same channel as the transmitter.
  • Double-check volume levels of: the music source, any sound equipment connected to the transmitter, and the headphones.
  • Double-check all connections from the music source to the audio input.
  • Check whether the transmitter is powered on and the headphones' battery is fully charged.

How many transmitters and headphones can work at once?

  • Up to 2 independent transmitters can work simultaneously.
  • There is no limit to the number of headphones that can be in one area (connected to the same transmitter channel).

Is there a pairing process to add additional headphones?

  • No, there is no pairing process other than selecting the appropriate channel with the ON/OFF/TUNE button on the headphones.

How far does the transmitter reach?

  • The operational range is approximately 100ft (30 meters).

What is the expected battery life for the headphones?

  • The headphones can run for about 8 hours continuously.
  • It takes about 4 hours to be fully charged.

Maintenance

  • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
  • Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
  • Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
  • Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.
  • Do not attempt to open the device.
  • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
  • Use a soft, clean, dry cloth to clean any exterior surfaces.

RF Energy Exposure and Product Safety Guide

ATTENTION!

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

Local Government Regulations

When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments must be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements:

  • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

CE Requirements:

(Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.

Disposal

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

IC Requirements:

Licence-exempt radio apparatus. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

RF Warning Statements

  • The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
  • DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
  • To avoid interference, turn off the radio in areas where signs are posted to do so.
  • DO NOT operate the transmitter in areas sensitive to electromagnetic radiation such as hospitals, airplanes, and blasting sites.

Avoid Choking Hazard

Small Parts. Not for children under 3 years.

Protect Your Hearing

WARNING

Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

  • Use the lowest volume necessary to do your job.
  • Turn up the volume only if you are in noisy surroundings.
  • Turn down the volume before adding headset or earpiece.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.

Approved Accessories

  • This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
  • For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com

User Tips

  • For optimal sound quality, ensure all audio cables are securely connected and not loose.
  • If experiencing static or signal drops, try switching the channel on the transmitter dock (CH1 or CH2) and re-syncing your headphones.
  • Remember to charge your headphones regularly to ensure uninterrupted listening pleasure.
  • When connecting to a TV, always check the TV's audio output settings (e.g., Headset, External Speakers, PCM) to ensure compatibility with the transmitter.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.