Product Overview
The IRIVER ITW-M7 are True Wireless Stereo (TWS) earbuds designed for a seamless audio experience. Featuring Bluetooth 5.3 for stable connectivity, IPX5 water resistance, and intuitive touch controls, these earbuds offer up to 20 hours of playtime with the included charging case.
Image: IRIVER ITW-M7 Wireless Earphones and charging cases in various colors.
Key Features:
- Bluetooth 5.3 for enhanced stability and efficiency.
- IPX5 water resistance, suitable for workouts and light rain.
- Up to 20 hours total playtime with the charging case.
- Intuitive touch controls for music and calls.
- Compact and comfortable in-ear design.
- USB Type-C charging for convenience.
Package Contents
Please check that all items are present in your package:
- IRIVER ITW-M7 Earbuds (Left & Right)
- Charging Case
- USB Type-C Charging Cable
- Eartips (Small, Medium, Large sizes)
- User Manual
Setup Guide
1. Initial Charging
- Before first use, fully charge the earbuds and the charging case.
- Connect the provided USB Type-C cable to the charging port on the case and a power source.
- The charging case LED indicator will blink red while charging and turn solid red when fully charged.
- Place the earbuds into the charging case. The earbuds' white LED will blink while charging and turn off when fully charged.
Approximate charging times: Earbuds 1.5 hours, Charging Case 2 hours.
2. Pairing with Your Device
- Ensure the earbuds are charged.
- Open the lid of the charging case. The earbuds will automatically power on and enter pairing mode. The LED on the earbuds will blink white and red.
- On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
- Search for "IRIVER ITW-M7" in the list of available devices.
- Select "IRIVER ITW-M7" to connect. Once connected, the earbud LEDs will stop blinking.
- If pairing fails, place the earbuds back into the case, close the lid, and repeat the steps.
Image: Visual guide for product features, touch controls, and pairing process.
Operating Instructions
Power On/Off
- Power On: Open the charging case lid, or long-press the touch area on both earbuds for 3 seconds.
- Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch area on both earbuds for 5 seconds.
Touch Control Functions
| Action | Left Earbud (L) | Right Earbud (R) |
|---|---|---|
| Play/Pause Music | Single Touch | Single Touch |
| Next Track | N/A | Double Touch |
| Previous Track | Double Touch | N/A |
| Answer/End Call | Single Touch | Single Touch |
| Reject Call | Long Press | Long Press |
| Activate Voice Assistant | Triple Touch | Triple Touch |
Maintenance
- Clean the earbuds and charging case regularly with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive materials.
- Ensure the charging contacts on both the earbuds and the case are clean and dry to prevent charging issues.
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Avoid exposing the earbuds to extreme temperatures or direct sunlight for prolonged periods.
- The IPX5 rating means they are resistant to water splashes and sweat, but they are not designed for submersion in water. Do not wash them under running water.
Troubleshooting
Earbuds not pairing with each other or device:
- Ensure both earbuds are charged.
- Place both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid again. This often resets the connection.
- Delete "IRIVER ITW-M7" from your device's Bluetooth list and try pairing again from scratch.
- Ensure no other Bluetooth devices are interfering or connected to the earbuds.
One earbud has no sound:
- Check if both earbuds are charged.
- Try placing both earbuds back into the case and taking them out again.
- Perform a full reset by forgetting the device on your phone and re-pairing.
Earbuds not charging:
- Ensure the charging case has power.
- Check that the charging contacts on both the earbuds and the case are clean and free of debris.
- Make sure the earbuds are correctly seated in the charging case.
- Try a different USB Type-C cable and power adapter.
Poor sound quality or intermittent connection:
- Ensure the earbuds are within the effective range of your Bluetooth device (typically 10 meters/33 feet) with no major obstacles.
- Avoid environments with strong Wi-Fi or other wireless interference.
- Try adjusting the eartips for a better seal in your ear.
- Ensure your device's volume is appropriately set.
Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | 5.3 |
| Bluetooth Profiles | HFP, HSP, A2DP, AVRCP |
| Bluetooth Codec | SBC, AAC |
| Playtime (Earbuds) | Up to 5 hours |
| Total Playtime (with Case) | Up to 20 hours |
| Charging Time (Earbuds) | Approx. 1.5 hours |
| Charging Time (Case) | Approx. 2 hours |
| Earbud Battery Capacity | 30mAh (each) |
| Charging Case Battery Capacity | 300mAh |
| Speaker Driver | 6mm Dynamic Driver |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32Ω |
| Sensitivity | 98dB ± 3dB |
| Earbud Weight | 3.5g (each) |
| Charging Case Weight | 28g |
| Earbud Dimensions (L x W x H) | 20 x 20 x 22 mm |
| Charging Case Dimensions (L x W x H) | 50 x 50 x 25 mm |
| Water Resistance | IPX5 |
User Tips
- Optimal Fit: Experiment with the different eartip sizes (S/M/L) to find the best fit for your ears. A good seal improves sound quality and bass response.
- Voice Assistant: Triple-tapping either earbud quickly activates your device's voice assistant (e.g., Siri, Google Assistant) for hands-free control.
- Battery Preservation: For long-term storage, ensure the earbuds and case have at least a partial charge (around 50%) and recharge them every few months to prevent battery degradation.
Warranty and Support
For warranty information and technical support, please refer to the official IRIVER website or contact your point of purchase. Keep your proof of purchase for any warranty claims.