1. Introduction
The ISDT ESC70 and ESC90 are advanced waterproof Electronic Speed Controllers (ESCs) designed for 1/8 and 1/10 scale RC cars. These ESCs feature mobile app control for parameter settings, real-time monitoring, and firmware updates, offering a user-friendly experience with robust performance.

2. Specifications
| Feature | ISDT ESC70 | ISDT ESC90 |
|---|---|---|
| Cont. / Peak Current | 70A / 120A | 90A / 180A |
| Motor Type | 540/550/775 Brushed Motor | |
| Application | 1/8 or 1/10 Various models | |
| Support Batteries | 2-3S LiPo or 6-8 Cell NiMH | |
| BEC Output | 5V-7.5V Switch (Stepping 0.1V) | |
| Wire/Connectors | 16AWG 200mm (Without Plug) | |
| Weight | Approx. 49g (ESC) / 4.5g (Switch) | |
| Dimension | 38.6 × 31.6 × 17.15 mm | |

3. Setup
3.1. Package Contents
- ISDT ESC70 or ESC90 Electronic Speed Controller
- Bluetooth Switch Module (2-in-1)
- Heat Shrink Tubing (various colors)
- Connection Wires (if applicable to model)

3.2. Wiring Connections
- Connect the ESC to your brushed motor (540/550/775 type).
- Connect the battery to the ESC (2-3S LiPo or 6-8 Cell NiMH).
- Connect the Bluetooth switch module to the designated interface on the ESC.
- Connect the ESC's signal cable to the receiver.

3.3. Bluetooth Connection Method
The ESC features an advanced electronic switch and Bluetooth two-in-one module for mobile app control.
- Download the ISD GO mobile application on your smartphone.
- Turn on your phone's Bluetooth switch.
- With the ESC powered off, long press the power button on the Bluetooth switch module until the blue indicator light comes on. Release the button.
- Open the ISD GO app, click on the '+' sign to add a device.
- Search for the ESC signal and click to connect. Once connected, the blue LED on the switch will remain ON.

Important: Please update the ISD GO APP and download the new firmware version 1.0.0.9 for optimal performance and compatibility.
4. Operating the ESC
4.1. Power On/Off
- Power On: Short press the power button once. The white LED will flash.
- Power Off: Long press the power button once.
4.2. Mobile App Control (ISD GO)
The ISD GO app allows for comprehensive control and monitoring of your ESC. No additional accessories are needed for wireless connection.

4.2.1. Real-time Monitoring
Monitor operating parameters and status in real-time, including throttle, battery capacity, temperature, and voltage.
4.2.2. Parameter Settings
Adjust various settings directly from the app:
- One-Click Beginner Mode: Friendly for beginner players, offering preset parameters for on-road, drift, off-road, and rock crawler models.
- Adjustable BEC Output: Set the BEC voltage from 5V to 7.5V with 0.1V increments.
- PWM Frequency: Adjust for ideal throttle curve and performance.
- Throttle and Brake Curves: Stepless adjustment for precise control over motor forward power and braking force.
- Active Drag Brake: Adjustable levels (1-20) for uphill assist and steep hill buffering, especially useful for RC crawlers. (Note: This mode should be set to forward/reverse (no brake) mode).
- Custom Start Music: Compose music between two octaves for a personalized startup sound.




4.3. Firmware Updates (OTA)
The ESC supports Over-The-Air (OTA) firmware upgrades via the ISD GO app. This ensures your ESC always has the latest features and best performance.

4.4. Product Demonstration Video
5. Maintenance
The ESC features a fully waterproof design, making it suitable for various conditions. However, to ensure longevity and prevent corrosion, it is recommended to clean and perform maintenance after each use, especially after exposure to water or harsh environments.
6. Troubleshooting
6.1. LED Status Indicators
- Power On: Short press once - white LED flashes.
- Standby: Green LED on.
- Error: Red LED flashes.
- Bluetooth to be connected: Long press for 5 seconds before use to enter setting - Blue LED flashes.
- Bluetooth Connected: Blue LED ON.
6.2. Common Issues
- ESC not connecting to app: Ensure your phone's Bluetooth is on and the ESC's Bluetooth switch is in pairing mode (blue LED flashing). If issues persist, try updating the ISD GO app to the latest version and ensure the ESC firmware is updated.
- App compatibility issues: Some users have reported that the ISD GO app may not be compatible with the latest Android versions. If you encounter this, check for app updates or consult the ISDT support resources.
- ESC not functioning: Verify all wiring connections are secure and correct. Check battery charge and ensure the motor is properly connected. If the red LED flashes, refer to the LED status indicators for error identification.
7. User Tips
- Always ensure the ISD GO app and ESC firmware are up-to-date for the best performance and compatibility.
- When using the active drag brake feature for crawlers, ensure the running mode is set to forward/reverse (no brake) for proper functionality.
- Regularly clean your ESC, especially after running in wet or dirty conditions, to prevent corrosion and extend its lifespan.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.