1. Introduction
Thank you for choosing the Flydigi BS1 Laptop Cooler. This device is engineered to provide superior cooling performance for your laptop, featuring advanced technologies such as a dual noise reduction system, intelligent frequency conversion temperature control, and a high-density dustproof net. Designed for gaming laptops and high-performance notebooks, the BS1 ensures efficient heat dissipation while maintaining a low noise profile.
2. Key Features
- Closed TurboCooling: Achieves 10 times the air intake volume for rapid cooling.
- Dual Noise Reduction System: Operates at a low noise level (within 57dB) without whistling sounds, thanks to a silencer barrel structure and rectifying grille design.
- Intelligent Frequency Conversion Temperature Control: Automatically adjusts fan speed based on real-time CPU and GPU temperatures for optimal cooling and energy efficiency.
- High-Speed Brushless Motor: Delivers 3000 RPM overclocking performance.
- High-Density Dustproof Net: Built-in filter efficiently removes dust, pet hair, dander, and other particles, reducing the need for frequent computer cleaning.
- Retractable Design: Compatible with laptops ranging from 15.6 inches to 21 inches.
- Adjustable Angles: Offers three ergonomic angle adjustments (10°, 20°, 30°) for comfortable use.
- User-Friendly Design: Features an extendable pull handle, silicone anti-slip pads, and customizable lighting effects.


3. Specifications

| Attribute | Detail |
|---|---|
| Product Model | BS1 |
| Cooling Method | Supercharged |
| Air Duct | Flydigi's proprietary air duct |
| Noise Reduction | Dual Acoustic Noise Reduction System |
| Noise Level | Within 57dB |
| Weight | 1.8kg |
| Compatibility | Laptops with a screen size of 15.6 inches or above (up to 21 inches) |
| Fan Size | 120mm |
| Fan Speed | 1300-3000rpm |
| Product Dimensions (Storage) | 454mm * 237mm * 77mm |
| Product Dimensions (Fully Extended) | 454mm * 337mm * 77mm |
| Power Cord Length | 1.5 meters |
| Power Supply | Charging adapter or computer power supply, supports 5V/2A and 9V/2A. Overclocking mode requires an 18W or higher adapter. |
| Material | Plastic |
| Certification | CE |
4. Setup Guide
- Unpack: Carefully remove the Flydigi BS1 Laptop Cooler from its packaging.
- Placement: Place the cooler on a flat, stable surface where you intend to use your laptop.
- Adjust for Laptop Size: The BS1 features a retractable design. Gently pull the extendable handle to adjust the cooler's width to match your laptop's size (compatible with 15.6, 17.3, and 21-inch laptops). Ensure your laptop sits securely on the silicone anti-slip pads.
- Connect Power: Connect the provided power cord to the cooler and then to a suitable power source (either a charging adapter or your computer's USB port). For optimal performance, especially when using 'Overclocking' mode, use a fast charging adapter of 18W or higher.
- Adjust Angle: Utilize the three-speed adjustment mechanism to set your preferred viewing and typing angle (10°, 20°, or 30°).


5. Operating Instructions
The Flydigi BS1 Laptop Cooler features intelligent controls for efficient and quiet cooling.
Fan Speed Modes:
The cooler offers four distinct fan speed modes, indicated by different RPMs:
- Silent: 1300 RPM
- Balance: 2100 RPM
- Turbo: 2700 RPM
- Overclocking: 3000 RPM

Intelligent Frequency Conversion Temperature Control:
The BS1 automatically adjusts its fan speed based on your laptop's real-time CPU and GPU temperatures. This ensures that your laptop receives the necessary cooling without excessive noise or power consumption.

Activating Overclocking Mode:
For maximum cooling performance, especially during intense gaming or demanding tasks, the 'Overclocking' mode can be utilized. Please ensure you are using a fast charging adapter of 18W or higher to power the cooler when activating this mode.

Customizable Lighting Effects:
The cooler features customizable lighting effects. Refer to the control panel or accompanying software (if applicable) for instructions on adjusting these settings.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Flydigi BS1 Laptop Cooler.
- Cleaning the Dustproof Net: The built-in high-density dustproof net should be cleaned periodically. Gently remove the net and clean it with a soft brush or by rinsing it under cool water. Ensure it is completely dry before reinserting.
- General Cleaning: Wipe the exterior of the cooler with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Avoid Obstructions: Ensure that the air intake and exhaust vents are not blocked by dust, debris, or other objects.

7. Troubleshooting
If you encounter any issues with your Flydigi BS1 Laptop Cooler, please refer to the following common solutions:
- Cooler Not Turning On:
- Ensure the power cable is securely connected to both the cooler and the power source.
- Try a different USB port or power adapter. - Insufficient Cooling:
- Check if the fan speed is set appropriately for your laptop's workload. Increase to 'Turbo' or 'Overclocking' mode if needed.
- Ensure the dustproof net is clean and not obstructed.
- Verify that the cooler's air intake and exhaust vents are clear.
- Make sure your laptop's own vents are not blocked. - Unusual Noise:
- While the BS1 has a dual noise reduction system, excessive noise might indicate an issue.
- Check for any foreign objects obstructing the fan blades.
- Ensure the cooler is placed on a flat, stable surface to prevent vibrations. - Overclocking Mode Not Activating:
- Confirm that you are using a fast charging adapter of 18W or higher. Lower wattage adapters may not support this mode.
If the problem persists after trying these steps, please contact customer support.
8. User Tips
- Optimal Power for Overclocking: To fully utilize the powerful 'Overclocking' mode (3000 RPM), always connect the cooler to a fast charging adapter of 18W or higher. This ensures stable and maximum performance.
- Regular Dust Filter Cleaning: Make it a habit to clean the high-density dustproof net regularly. A clean filter significantly improves airflow and cooling efficiency, extending the life of both the cooler and your laptop.
- Proper Laptop Placement: Ensure your laptop is centered and securely placed on the cooler's anti-slip pads. This maximizes the effectiveness of the airflow and prevents accidental slips.
- Adjust Angle for Airflow: Experiment with the 10°, 20°, and 30° angle adjustments not just for ergonomics, but also to find the best position for unobstructed airflow to your laptop's intake vents.
- Monitor Temperatures: While the BS1 intelligently controls fan speed, occasionally monitoring your laptop's CPU and GPU temperatures can help you understand its cooling needs and adjust the cooler's mode manually if desired for specific tasks.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.