Introduction
This manual provides detailed instructions for the setup, programming, and use of your new 433MHz fixed code remote control. Designed for compatibility with various garage door openers, electronic gates, and other home automation systems operating at 433MHz, this remote offers a convenient self-copying function to duplicate your existing fixed code transmitters. Please read these instructions carefully before use to ensure proper operation and longevity of your device.
Specifications
| Brand Name | Scimagic-RC |
| Origin | Mainland China |
| Certification | CE |
| Frequency | 433MHz, 433.92MHz |
| Encoding Method | Fixed code (Self-Copy) |
| Buttons | 2 or 4 |
| Rated Voltage | CR2032 Battery (included) |
Package Contents
- 1 x Remote Control
- 1 x CR2032 Battery
- 1 x English Manual
Compatibility
This remote control is 100% compatible with the following fixed code models operating at 433MHz or 433.92MHz:
- Digital 382 433
- Digital 384 433
- Digital D302 433
- Digital D304 433
- Digital D313 433
- Digital D321 433
- Digital D323 433
- Command 131 433
- Digital 211 433
- Digital 212 433
- Digital 214 433
- Digital 221 433
- Digital 222 433
- Digital 224 433
- Digital 231 433
- Digital 232 433
Special Reminder: Please ensure your original remote control operates at 433MHz or 433.92MHz and is a fixed code type. This remote is not compatible with 868MHz models or rolling code systems.
Setup and Programming
This remote control features a self-copying function. Follow these steps to duplicate your original fixed code remote control.
Video Tutorial: Programming Steps
Step 1: Clear the History Code from the Duplicator
- Press and hold button A (top left) and button B (top right) simultaneously on the new remote control until the LED flashes 3 times.
- Release button B (while continuing to hold button A).
- Press button B slowly 3 times. The LED will flash rapidly.
- Release button A. The code clearance is now complete.
Step 2: Copy Code from Original Transmitter
- Place the new remote control (duplicator) and your original remote control side-by-side, as close as possible.
- Press and hold a button on your original transmitter (e.g., button A).
- Simultaneously, press and hold the corresponding button on the new remote control (e.g., button A) until the new remote's LED flashes rapidly.
- Release both buttons. The code for that button is now copied.
- Repeat this process for any other buttons you wish to copy.
Operating Instructions
Once programmed, your new remote control functions identically to your original transmitter. Simply press the corresponding button to activate the desired function, such as opening or closing a garage door, or controlling an electronic gate.
- Vehicle Central Locking Systems: Use the programmed button to lock or unlock your vehicle.
- Garage Doors: Press the programmed button to open or close your garage door.
- Electronic Gates: Activate your electronic gate with a press of the programmed button.
- Electrical Appliances/Home Automation: Control compatible lights or other home automation devices.
- Car Sunroofs: Open or close your car's sunroof.
- Car/Motorbike Alarms: Arm or disarm your vehicle's alarm system.
Wall Mount Installation
The remote control comes with a convenient wall mount, allowing you to fix it to a wall for easy access. This ensures your remote is always in a designated spot and readily available.
Maintenance
Battery Replacement
The remote control is powered by a CR2032 battery. When the remote's LED indicator becomes dim or the transmission range decreases, it's time to replace the battery.
- Carefully open the remote control casing.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring correct polarity (+/-).
- Close the remote control casing securely.
No reprogramming is typically required after battery replacement for fixed code remotes.
Troubleshooting
Remote Not Working After Programming
- Check Frequency: Ensure your original remote operates at 433MHz or 433.92MHz. This duplicator is not compatible with other frequencies (e.g., 868MHz) or rolling code systems.
- Clear Code Properly: Re-perform the 'Clear History Code' step (Step 1) to ensure the duplicator is completely reset.
- Copy Code Correctly: Ensure the original and new remotes are placed very close during the copying process. Press and hold buttons firmly until the LED on the new remote flashes rapidly, indicating a successful copy.
- Battery Check: Verify that the battery in both the original and new remote controls is functional and correctly inserted.
LED Indicator Not Flashing
- Battery: The battery might be dead or low. Replace the CR2032 battery.
- Button Malfunction: Ensure the buttons are not stuck and are pressing down correctly.
User Tips
- For best copying results, perform the programming steps in a quiet environment away from other radio frequency interference.
- Always keep your original remote control in a safe place as a master copy.
- If you have multiple fixed code remotes of the same frequency, you can program several duplicators from one original.
Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.