1. Product Overview
The COFUN 3-in-1 Pasta Maker Attachment is designed to seamlessly integrate with your KitchenAid or Cuisinart stand mixer, transforming it into a versatile pasta-making machine. Crafted from high-quality stainless steel, this attachment set includes a pasta roller, a spaghetti cutter, and a fettuccine cutter, allowing you to create a variety of fresh homemade pasta with ease.

Figure 1: COFUN 3-in-1 Pasta Maker Attachment Set
2. Safety Information
- Always ensure the stand mixer is turned off and unplugged before attaching or removing the pasta maker.
- Keep hands and utensils away from the rollers and cutters during operation.
- Do not immerse the attachment in water for cleaning. Refer to the "Maintenance" section for proper cleaning instructions.
- This attachment is designed for household use only.
- Keep out of reach of children.
3. Setup and Assembly
3.1 Attaching to the Stand Mixer
- Ensure your KitchenAid or Cuisinart stand mixer is turned off and unplugged.
- Loosen the attachment knob on the mixer's power hub.
- Insert the attachment shaft into the power hub, ensuring the power shaft fits into the square hub socket.
- Rotate the attachment back and forth slightly if necessary until it fits securely.
- Tighten the attachment knob until the pasta maker is firmly attached to the mixer.

Figure 2: Attaching the Pasta Roller to the Stand Mixer
4. Operating Instructions
4.1 Dough Preparation
For best results, prepare your pasta dough according to your preferred recipe. A common ratio is:
- 1 large egg for every 100g (3.5 oz) of flour.
- Tip: If using smaller eggs, reduce the amount of flour slightly. Large eggs generally yield the best results.
Mix the ingredients until a rough dough forms, then knead until smooth and elastic. Allow the dough to rest for at least 30 minutes before rolling.

Figure 3: Pasta Dough Preparation Steps
4.2 Using the Pasta Roller
- Attach the pasta roller to the stand mixer (refer to Section 3.1).
- Set the regulating knob to the highest thickness setting (e.g., '1' or '8' depending on the model's numbering, typically the widest opening).
- Turn on the stand mixer to a low speed (e.g., Speed 2).
- Feed a flattened piece of dough through the rollers.
- Fold the dough in half, then feed it through again. Repeat this process several times until the dough is smooth and pliable.
- Gradually adjust the regulating knob to a thinner setting, feeding the dough through each setting until you reach your desired thickness (0.4mm to 2mm).

Figure 4: Adjusting Dough Thickness on the Pasta Roller

Figure 5: Pasta Roller in Operation
4.3 Using the Fettuccine Cutter
- Once you have rolled your pasta dough to the desired thickness using the pasta roller, remove the pasta roller attachment.
- Attach the fettuccine cutter to the stand mixer's power hub.
- Turn on the stand mixer to a low speed (e.g., Speed 2).
- Feed the pasta sheet through the fettuccine cutter. The attachment will cut the sheet into hearty fettuccine noodles (approx. 6mm wide).
- Catch the cut pasta as it emerges and dust lightly with flour to prevent sticking.

Figure 6: Fettuccine Cutter in Operation
4.4 Using the Spaghetti Cutter
- After rolling your pasta dough to the desired thickness, remove any other attachments.
- Attach the spaghetti cutter to the stand mixer's power hub.
- Turn on the stand mixer to a low speed (e.g., Speed 2).
- Feed the pasta sheet through the spaghetti cutter. The attachment will cut the sheet into classic spaghetti noodles (approx. 1.5mm thin).
- Catch the cut pasta as it emerges and dust lightly with flour to prevent sticking.

Figure 7: Spaghetti Cutter in Operation
4.5 Visual Demonstration
Video 1: Demonstration of Pasta Making Process with Attachment
This video illustrates the steps from dough preparation to rolling and cutting various pasta types using the COFUN attachments.
5. Maintenance and Cleaning
Proper cleaning and maintenance will ensure the longevity and optimal performance of your pasta maker attachments.
- Immediate Cleaning: After each use, allow any residual dough to dry on the attachments for about 10-15 minutes. This makes it easier to remove.
- Remove Dough: Use the included cleaning brush or a dry soft cloth to remove any dried dough or flour from the rollers and cutters. A wooden skewer or toothpick can help dislodge dough from crevices.
- Do NOT Wash with Water: The attachments are NOT dishwasher safe and should NEVER be immersed in water. Water can damage the internal mechanisms and lead to rust.
- Wipe Clean: Wipe the exterior surfaces with a dry, soft cloth.
- Storage: Store the clean and dry attachments in a cool, dry place.
The highly polished surface of the product aids in easy cleaning.
6. Troubleshooting
- Dough sticking to rollers/cutters:
- Ensure your dough is not too wet. Add a small amount of flour if necessary.
- Lightly dust the dough and the rollers/cutters with flour before and during use.
- Pasta sheets tearing:
- Your dough might be too dry or not kneaded enough. Ensure the dough is smooth and elastic.
- Try starting with a thicker setting and gradually reducing the thickness.
- Attachment not fitting securely:
- Ensure the stand mixer is unplugged.
- Verify the attachment shaft is correctly aligned with the power hub socket.
- Tighten the attachment knob firmly.
- Unusual noise during operation:
- Ensure the attachment is securely fastened to the mixer.
- Check for any foreign objects or excessive dough buildup in the mechanism.
- If the noise persists, discontinue use and contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | COFUN |
| Model | 3-in-1 Pasta Maker Attachment |
| Material | Food-grade SUS 304 Stainless Steel (housing and shaft), Premium Aluminum (shaft), BPA-free case. |
| Thickness Settings | 8 adjustable settings (0.4mm - 2mm / 0.016in - 0.08in) |
| Spaghetti Width | Approx. 1.5mm (0.06 inch) |
| Fettuccine Width | Approx. 6mm (0.24 inch) |
| Compatibility | All KitchenAid Stand Mixers, Cuisinart SM-50BC, SM-50R, SM-50 |
| Product Weight | Approx. 1.08 kg |
| Package Dimensions (L x W x H) | 29 cm x 24 cm x 8 cm |
| Package Weight | 2.519 kg |
8. User Tips
- Dough Consistency is Key: The success of your pasta largely depends on the dough. It should be firm but pliable, not sticky. If it's too sticky, add a little more flour; if too dry, a few drops of water.
- Work in Batches: For easier handling and better results, divide your dough into smaller, manageable portions before feeding them through the roller.
- Dust with Flour: Lightly dust your pasta sheets and cut noodles with flour to prevent them from sticking together, especially if you're not cooking them immediately.
- Experiment with Thickness: Don't be afraid to experiment with the 8 thickness settings to find your preferred pasta texture for different dishes. Thinner sheets are great for delicate pasta like ravioli, while slightly thicker ones suit heartier sauces.
9. Warranty and Support
For any questions, concerns, or support regarding your COFUN Pasta Maker Attachment, please contact our customer service team. Refer to your purchase documentation for specific warranty details and contact information.