1. Introduction
This manual provides essential information for the proper use and maintenance of your TEKA HC485ME replacement oven tray. Designed for specific TEKA oven models, this tray ensures optimal baking and roasting performance. Please read these instructions carefully before first use.
2. Setup and Installation
The TEKA HC485ME oven tray is a replacement part designed for easy installation. Before installation, ensure your oven is turned off and completely cooled down.
- Verify Compatibility: Confirm that your oven model is listed among the compatible models (see Specifications section) or that the dimensions precisely match your existing tray slot.
- Unpack: Carefully remove the new oven tray from its packaging.
- Placement: Slide the oven tray into the designated rack guides within your oven. Ensure it sits securely and level.
3. Operating Instructions
The oven tray is designed for standard oven use and is suitable for various cooking tasks.
- Preheating: Always preheat your oven to the desired temperature before placing the tray inside with food.
- Loading: Place food directly on the tray or in appropriate bakeware on the tray. Avoid overloading to ensure even cooking and prevent spills.
- Temperature: The tray is suitable for all standard oven temperatures.
- Safety: Always use oven mitts or heat-resistant gloves when handling the hot oven tray to prevent burns.
4. Maintenance
Proper cleaning and care will extend the life and maintain the performance of your oven tray.
- Cool Down: Allow the tray to cool completely before attempting to clean it.
- Hand Washing: Wash the tray with warm, soapy water and a non-abrasive sponge or cloth. Rinse thoroughly and dry immediately to prevent water spots or rust.
- Dishwasher: The tray is generally dishwasher safe, but hand washing is recommended for best results and to preserve the finish.
- Avoid Abrasives: Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the non-stick coating or finish of the tray.
5. Troubleshooting
- Tray does not fit:
- Check Model Compatibility: Double-check that your oven model is listed as compatible with the HC485ME tray.
- Verify Dimensions: Measure your oven's interior rack space and compare it with the tray's specified dimensions (460mm x 368mm x 24mm).
- Incorrect Orientation: Ensure the tray is inserted correctly, without obstruction.
- Food sticking to the tray:
- Grease/Line: Always grease the tray or use parchment paper/baking mats, especially for items prone to sticking.
- Cleanliness: Ensure the tray is thoroughly clean before each use, as residue can cause sticking.
6. Specifications
| Brand | Teka |
| Model | HC485ME |
| Part Number | 43TK0016 |
| Original Code | 82405901 |
| Dimensions (Length x Width x Depth) | 460mm x 368mm x 24mm (approx. 46cm x 36.8cm x 2.4cm) |
| Type | Oven Parts / Baking Tray |
| Compatible Models |
|
7. User Tips
- Verify Dimensions Carefully: Before purchasing or installing, always measure your oven's internal dimensions and compare them with the tray's specifications. User inquiries highlight the importance of precise measurements (e.g., 37.7cm) for proper fit, as slight variations can prevent the tray from seating correctly.
8. Warranty and Support
For any questions regarding your TEKA HC485ME oven tray, including warranty information or technical support, please contact the seller or the official Teka customer service. Keep your purchase receipt as proof of purchase.
