JIKONG 3.2 inch Screen Display

Contents

JIKONG BMS 3.2 inch Screen Display User Manual

For JIKONG Battery Management Systems

1. Introduction

The JIKONG 3.2 inch Screen Display is designed to provide real-time monitoring and control for your JIKONG Battery Management System (BMS). This display offers a clear and intuitive interface to view critical battery parameters and manage your BMS with ease. It is compatible with all JIKONG BMS models.

Front view of the JIKONG BMS 3.2 inch display
Figure 1: JIKONG BMS 3.2 inch Screen Display

2. Package Contents

Please check the package for the following items:

  • 1 x JIKONG 3.2 inch Screen Display
  • 1 x Connection Cable (approximately 400mm in length)
JIKONG BMS 3.2 inch display with its connection cable
Figure 2: Display and Connection Cable

3. Specifications

FeatureSpecification
Screen Size3.2 inches
Dimensions (Display)100mm (Length) x 62mm (Width)
Mounting Dimensions (Rear)94.5mm (Length) x 55.5mm (Width)
Cable Length400mm
Weight0.102 kg
CertificationCE
Compatible BMS TypeJIKONG LIFEPO4 Battery BMS (Active Balanced, Smart, Common Port)
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
Detailed display layout with numbered indicators and dimensions
Figure 3: Display Interface and Dimensions
Rear view of the JIKONG 3.2 inch display showing adapter and mounting dimensions
Figure 4: Rear View and Mounting Dimensions

4. Setup

  1. Prepare the BMS: Ensure your JIKONG BMS is powered off before connecting the display.
  2. Locate the Connector: Identify the dedicated display or button connector on your JIKONG BMS. This display typically connects to the button connector port.
  3. Connect the Cable: Carefully plug one end of the provided 400mm connection cable into the display unit and the other end into the corresponding port on your JIKONG BMS. Ensure the connection is secure and correctly oriented.
  4. Mount the Display: The display can be integrated into a panel or enclosure. Refer to Figure 4 for mounting dimensions (94.5mm x 55.5mm).
  5. Power On: Once connected, you can power on your BMS. The display should illuminate and show battery information.
JIKONG 3.2 inch display showing cable connection and button function
Figure 5: Connection and Button Function

5. Operating Instructions

5.1 Power On/Off

To turn the connected BMS on or off, long press the button located on the right side of the display unit (refer to Figure 5).

5.2 Display Readings

The 3.2 inch screen provides comprehensive real-time data. Refer to Figure 3 for the location of each indicator:

  • 1. MOS Temp.: Displays the temperature of the Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) within the BMS.
  • 2. SOC (%): Shows the State of Charge of the battery pack as a percentage.
  • 3. Battery Pack Total Voltage: Indicates the overall voltage of your battery pack.
  • 4. Output Current: Displays the current being drawn from or supplied to the battery.
  • 5. Fault Code: Shows any error codes or warnings detected by the BMS.
  • 6. Average Voltage of the battery: Displays the average voltage across the battery cells.
User photo showing the JIKONG display integrated into a battery pack
Figure 6: Display in Operation (Example)

6. Maintenance

To ensure the longevity and optimal performance of your JIKONG 3.2 inch Screen Display:

  • Keep the display clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Protect the screen from direct sunlight and extreme temperatures, as these can affect display readability and lifespan.
  • Ensure all cable connections remain secure.

7. Troubleshooting

  • Display does not power on:
    • Check if the connection cable is securely plugged into both the display and the BMS.
    • Ensure the BMS itself is powered on.
    • Verify that the display is connected to the correct port on the BMS (typically the button connector).
  • Incorrect temperature reading:
    • If the displayed MOS temperature seems inaccurate, check the settings of your JIKONG BMS via its dedicated software or app, if available.
    • Ensure the BMS temperature sensors are functioning correctly.
  • Not all parameters are displayed:
    • Some older BMS firmware versions may not support all display parameters. Consider updating your JIKONG BMS firmware to the latest version for full functionality.
  • Display image darkens from an angle:
    • This is a common characteristic of certain LCD display technologies. For optimal viewing, observe the display directly from the front.

8. User Tips

  • The display is highly convenient for monitoring battery charge and discharge processes.
  • Its clear interface allows for easy visibility of the percentage State of Charge (SOC) from a distance, with other detailed values becoming clear when viewed closer.
  • The product is noted for its good visual quality and ease of installation.

9. Frequently Asked Questions (FAQ)

Q: Will this screen fit a Daly BMS?
A: This display is specifically designed for JIKONG BMS models and is not guaranteed to be compatible with other brands like Daly BMS.
Q: Are longer connection cables available?
A: The standard package includes a 400mm cable. Longer cables are not explicitly offered with this product.

10. Warranty and Support

For any warranty claims, technical support, or further inquiries, please contact the JIKONG official store or your authorized reseller. Ensure you have your purchase details available when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.