Universal M22

Contents

M22 Car HUD Head Up Display Instruction Manual

Model: M22

Universal Digital GPS Speedometer with HD LCD Projection

1. Product Overview

The M22 Car HUD Head Up Display is a universal digital GPS speedometer designed to project essential driving information onto your car's windshield. It features a high-definition LCD display, GPS+Beidou dual-mode chip for accurate speed, and automatic brightness adjustment for optimal visibility day and night. This device is compatible with all vehicle types, including new energy vehicles, gas-electric hybrid vehicles, fuel cars, buses, and trucks, and is powered via a standard USB (5V) connection.

M22 Car HUD Head Up Display showing speed, time, and compass on a windshield
M22 Car HUD Head Up Display in operation, showing speed and other data.
Integrated design of the M22 HUD with a hood to prevent glare
Integrated design with hood to prevent glare.

2. Setup Instructions

The M22 HUD is designed for non-destructive, plug-and-play installation.

  1. Connect Power: Plug the provided USB cable into a car USB (5V) port or a cigarette lighter adapter.
  2. Route Cable: Carefully insert the USB cable wire into the A-pillar sealing strip to conceal it.
  3. Position HUD: Connect the other end of the USB cable to the HUD unit and place the HUD in a suitable position on your dashboard, ensuring a clear line of sight for projection.
  4. Apply Reflective Film (Optional but Recommended): For optimal visibility, especially in bright conditions, apply the included reflective film to the windshield where the HUD projects. The film adheres by static electricity and can be repositioned.
Three steps for non-destructive installation: plug USB, route cable, place HUD
Non-destructive installation steps.

Special Reminder:

  • The working voltage of this product is 5V. Do not use a voltage higher than 5V for power supply.
  • After power-on, the compass icon will flash to indicate star search. The device can be used normally only after the icon stops flashing and remains steady.

3. Operating Instructions

3.1 Function Display

Diagram of M22 HUD display functions with numbered labels
Overview of the M22 HUD display functions.
  1. Compass: Displays direction (W West, N North, E East, S South).
  2. Decorative Lights: Ambient lighting.
  3. Vehicle Speed Icon: Indicates current vehicle speed.
  4. Overspeed Alarm Icon: Alerts when speed exceeds a set limit.
  5. Auto Aperture: Automatic light sensor.
  6. Multi-function Display Area: Shows various data depending on selected mode.
  7. TIME Clock / MIN Driving Time / TRIP Driving Mileage: Displays current time, accumulated driving time, or trip mileage.
  8. Vehicle Speed: Digital display of current speed.
  9. Speed Unit: Displays unit as km/h (Kilometer unit) or MPH (miles).

3.2 Key Functions

Diagram of M22 HUD buttons: Power, Add, Reduce, Set
Control buttons on the M22 HUD.
  1. Power Button: Long press for 2 seconds to turn off. Long press again for 2 seconds to turn on.
  2. Reduce Button (Left Arrow): Short press to switch the speed mode, enter settings and reduce parameter values. Long press for 2 seconds to turn off the alarm sound, then long press again to turn it on.
  3. Add Button (Right Arrow): Short press to switch the display, increase parameter values after entering settings. Press and hold for 2 seconds to clear fault codes, then press and hold again to return to normal display.
  4. M Key (Set Button): Short press (click) to switch function display and add menu options after entering settings. Long press (press and hold for 2 seconds) to enter settings. After adjustment, press and hold for 2 seconds to save and exit.

3.3 Automatic Switch Machine

The device automatically powers on when the car starts and powers off when the car is turned off, ensuring no power leakage.

Diagram showing automatic boot on vehicle start and auto sleep on vehicle parking
Automatic power on/off with vehicle.

3.4 Multifunction Display Modes

Multiple interfaces can be switched to meet different needs, displaying combinations of vehicle speed, clock, driving time, mileage, and compass.

Examples of different display modes: Compact, Speed+Clock, Speed+Progress Bar, Speed+Driving Time+Progress Bar, Speed+Driving Time+Compass, All
Various display modes available.

3.5 Automatic Brightness Adjustment

The HUD automatically adjusts its display brightness according to the intensity of the outside light, ensuring clear visibility in strong light and preventing dazzling at night.

Comparison of HUD display brightness during daytime and nighttime driving
Automatic brightness adjustment for day and night.

4. Settings

4.1 Enter Setup Mode

Press and hold the M key for 2 seconds to enter the setting menu. Short press the M key to switch between setting items (1-7). Short press the Reduce or Add button to switch or adjust the parameter value. Then, long press the M key for 2 seconds to save and exit.

4.2 Setting Options

Menu OptionFunctionAdjustment RangeInstructions for UseDefault
1Speed Fine-tuning50-150Adjust parameter value if there's an error between HUD speed and dashboard speed. E.g., if dashboard shows 100 KM/H and HUD shows 105 KM/H, adjust to 102.107
2Overspeed Alarm Setting0-250Sets the speed at which the overspeed alarm activates.150
3Fatigue Driving Reminder1.0-8.0Sets the continuous driving duration after which a reminder is issued.8.0
4Brightness Mode Adjustment0-110 for automatic photosensitive mode; 1-11 for manual adjustment.0
5Speed Unit0-10 for kilometer unit (km/h); 1 for miles unit (MPH).0
6Time Calibration0:00-12:00Adjust the time zone if satellite signal is not received. After finding the satellite, adjust and synchronize with local time.8:00
7Factory Data Reset0-1Default is 0. Adjust to 1, then press and hold vertically for 2 seconds to save and exit.0

5. Troubleshooting (Frequently Asked Questions)

5.1 No display on the screen, no electricity

Check if the USB cable is damaged. Replace the USB cable for testing. Ensure you are not using a voltage higher than 5V for power supply.

5.2 No vehicle speed displayed

The power-on satellite icon flashes to indicate the satellite search status. In locations like underground parking lots, tunnels, under bridges, or areas with obstacles, the device may not connect to the satellite. Move the car to an open road and wait for the satellite icon to stop flashing (and remain steady) for normal operation.

5.3 Time Calibration

  1. Adjust the time zone of your location if you do not receive satellite signals.
  2. After the satellite signal is acquired, adjust and synchronize with the local time.

5.4 Inaccurate speed

First, check if the speed unit is correctly set (km/h or MPH) using setting item 5. When cars leave the factory, the dashboard speed may be increased by 5-7% by the manufacturer. To fine-tune the vehicle speed, if your car's instrument shows 100 Km/h and the HUD shows 105 Km/h, adjust the parameter value in setting item 1 to 102.

5.5 Wrong display of driving direction

If there is no speed, the satellite cannot identify your driving direction. The direction can only be displayed normally when the speed exceeds 5 KM/H.

5.6 Speed still displayed after the car stops

In areas with obstacles such as underground parking lots, tunnels, and overpasses, the GPS signal may be unstable, causing the satellite to drift. Drive the car to an open road for the signal to stabilize.

5.7 Turn off the buzzer

Long press the Reduce button for 2 seconds to turn off the buzzer. Press and hold again for 2 seconds to turn the buzzer back on.

6. Specifications

FeatureDetail
MaterialPC+ABS
Screen TypeLED
Screen Size3.5 inch
Output FrequencyHead Up Display
Rated PowerHUD
Wire or WirelessWire
OriginMainland China
FunctionsSpeed, Travelling Direction, Single Travelling Time, Single Distance, Time
AlarmOverspeed Alarm
Package Dimensions (L x W x H)15 cm x 11 cm x 6 cm
Package Weight0.154 kg

6.1 Package Contents

Image showing the M22 HUD unit, reflective film, manual, USB cable, and non-slip mat
Product accessories included in the package.
  • 1 x Car Head Up Display (M22-HUD)
  • 1 x USB Cable
  • 1 x Reflective Film
  • 1 x Anti-Slip Pad
  • 1 x Manual

7. User Tips

  • Speed Calibration: It is highly recommended to fine-tune the speed settings (Menu Option 1) after installation to match your car's dashboard or GPS navigation for accurate readings.
  • Visibility: For best visibility, especially during bright daylight, use the included reflective film on your windshield. The display is generally clear day and night.
  • Easy Installation: The plug-and-play USB connection makes installation very simple. You can easily route the cable and position the unit.
  • Safety Feature: The overspeed alarm function is a helpful safety feature to keep you aware of your speed.
  • Time Display: Remember to calibrate the time zone (Menu Option 6) as the device may default to China's local time.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.

9. Product Video

Watch this video for a demonstration of the M22 Car HUD Head Up Display in use, including installation and various display modes.

Demonstration of the M22 HUD features and installation.

© 2023 Universal Car HUD. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.