1. Introduction
Thank you for choosing the Zealot S49 Pro Wireless Speaker. This portable subwoofer speaker is designed to deliver high-quality audio with powerful bass, featuring Bluetooth 5.2 connectivity, IPX6 waterproofing, dual pairing capabilities, and dynamic RGB lighting. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity.
2. Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or open flames.
- Keep the speaker away from water and liquids, especially when charging, to prevent electric shock or damage. While the speaker is IPX6 waterproof, ensure charging ports are dry before connecting cables.
- Do not attempt to disassemble, repair, or modify the speaker. This will void the warranty and may cause damage or injury.
- Use only the provided charging cable or a certified Type-C cable with a DC 5V power source.
- Keep out of reach of children.
- Avoid listening at high volume levels for extended periods to prevent hearing damage.
3. Package Contents
Please check the box for the following items:
- Zealot S49 Pro Wireless Speaker
- Type-C Charging Cable
- Lanyard
- Instruction Manual
4. Product Overview
The Zealot S49 Pro features an intuitive control panel and robust design for both indoor and outdoor use.
Controls and Ports:
- Power Button: Press and hold to turn on/off.
- Play/Pause Button: Play or pause music. Answer/end calls.
- Volume Up (+): Increase volume. Long press for next track.
- Volume Down (-): Decrease volume. Long press for previous track.
- Mode (M) Button: Switch between Bluetooth and AUX modes.
- RGB Light Button: Control RGB lighting effects.
- Type-C Charging Port: For charging the speaker.
- AUX-in Port: For wired audio connection.
5. Setup and Connection
5.1 Charging the Speaker
- Connect the provided Type-C charging cable to the speaker's charging port.
- Connect the other end of the cable to a DC 5V power adapter (not included) or a USB port on a computer.
- The charging indicator light will illuminate. It will turn off or change color once fully charged.
- A full charge provides approximately 3000mAh of battery capacity for extended playback.
5.2 Powering On/Off
- To Power On: Press and hold the Power button for a few seconds until you hear an audible prompt and the indicator lights turn on.
- To Power Off: Press and hold the Power button for a few seconds until you hear an audible prompt and the indicator lights turn off.
5.3 Bluetooth Pairing
- Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
- Enable Bluetooth on your device (smartphone, tablet, computer).
- Search for available Bluetooth devices and select "ZEALOT S49 Pro" from the list.
- Once paired, you will hear a confirmation sound, and the LED light will stop flashing.
- The speaker uses Wireless 5.2 technology for rapid and stable transmission up to 10 meters.
5.4 Dual Pairing (TWS - True Wireless Stereo)
You can connect two Zealot S49 Pro speakers together for a true wireless stereo experience:
- Ensure both S49 Pro speakers are turned on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), double-press the Power button or a dedicated TWS button (if available, otherwise refer to specific model instructions for TWS initiation). The speaker will enter TWS pairing mode.
- The two speakers will automatically connect to each other. You will hear a confirmation sound once connected.
- Once TWS is successful, the primary speaker's LED will flash, indicating it's ready to pair with your device.
- Enable Bluetooth on your device and connect to the primary speaker (e.g., "ZEALOT S49 Pro").
- Audio will now play in stereo through both speakers.
5.5 AUX Connection
- Turn on the speaker.
- Connect one end of a 3.5mm audio cable (not included) to the speaker's AUX-in port.
- Connect the other end to the audio output jack of your device.
- The speaker will automatically switch to AUX mode. If not, press the 'M' (Mode) button to select AUX mode.
6. Operating Instructions
6.1 Music Playback
- Play/Pause: Press the Play/Pause button.
- Volume Control: Press '+' to increase volume, '-' to decrease volume.
- Next Track: Long press the '+' button.
- Previous Track: Long press the '-' button.
6.2 Hands-Free Calling
The speaker features a built-in noise-canceling microphone for clear call experiences.
- Answer Call: Press the Play/Pause button once when a call comes in.
- End Call: Press the Play/Pause button once during a call.
- Reject Call: Press and hold the Play/Pause button for 2 seconds.
6.3 RGB Lighting Control
Press the dedicated RGB Light button to cycle through different colorful light effects or turn them off.
7. Maintenance
- Cleaning: Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the speaker fully at least once every three months if not in regular use.
- Water Resistance: The speaker is IPX6 waterproof, meaning it can withstand powerful water jets. However, it should not be submerged in water. Ensure all ports are securely closed before exposure to water.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Low battery. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; Bluetooth disabled on device; device too far. | Ensure speaker is in pairing mode (flashing LED). Enable Bluetooth on your device. Move device closer to speaker (within 10m). Forget previous connections on your device and try again. |
| No sound. | Volume too low; incorrect input mode; device not playing. | Increase speaker and device volume. Press 'M' button to switch input modes. Ensure audio is playing on your connected device. |
| TWS pairing fails. | Speakers already connected to other devices; speakers too far apart. | Disconnect both speakers from any Bluetooth devices. Ensure both speakers are S49 Pro models. Place speakers close to each other during TWS pairing. |
| Sound distortion. | Volume too high; low battery; interference. | Reduce volume. Charge the speaker. Move away from other electronic devices that may cause interference. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ZEALOT |
| Model Name | S49 Pro |
| Speaker Type | Portable |
| Communication | AUX, Bluetooth, Wireless |
| Bluetooth Version | 5.2 |
| Transmission Range | 10 meters |
| Battery Capacity | 3000mAh |
| Power Source | Battery, USB |
| Input Power | 20W |
| Charging Voltage | DC 5V |
| Working Voltage | 3.7V |
| Speaker Size | Φ57mm * 2 (Dual Speakers) |
| Audio Crossover | Full-Range |
| Frequency Response | 20Hz-20kHz |
| Distortion Degree | < 1% |
| Waterproof Rating | IPX6 |
| Voice Control | No |
| Support APP | No |
| Cabinet Material | PVC |
| Product Dimensions (LxWxH) | 86 x 86 x 204 mm (3.38 x 3.38 x 8.03 inches) |
| Product Weight | 780g |
| Certifications | CE, FCC |
10. User Tips
- Optimal Stereo Experience: For the best True Wireless Stereo (TWS) sound, ensure both speakers are fully charged before initiating dual pairing.
- Port Protection: Always ensure the charging port and AUX-in port are completely dry before connecting any cables to prevent damage, especially after exposure to water.
- Battery Longevity: To maximize the lifespan of your speaker's battery, avoid leaving it in extremely hot or cold environments for extended periods.
- Portability: Utilize the included lanyard for easy and secure carrying during outdoor activities like hiking or cycling.
11. Warranty and Support
Your Zealot S49 Pro Wireless Speaker comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact the seller/manufacturer directly. Please retain your proof of purchase for warranty claims.
