olevo SKMK 1200 C2 / C3 / D4 / E5

User Manual: Blender Blade Drive Wheel 7 Gear

For Monsieur Cuisine Plus SKMK 1200 C2 / C3 / D4 / E5

1. Product Information

This manual provides instructions for the Blender Blade Drive Wheel 7 Gear, a replacement part for the Monsieur Cuisine Plus series.

  • Product Name: Blender Blade Drive Wheel 7 Gear for Monsieur Cuisine Plus SKMK 1200 C2/C3
  • Model: MC-DW-7G-001
  • Batch Number: LP20260212-167
  • Brand: olevo

2. Manufacturer & EU Representative Information

  • Manufacturer: Shenzhen Lipeng Yuan Technology Co., Ltd.
  • EU Authorized Representative:
    • Name: ZHEKAN GmbH
    • Address: Romeracker 8, 76297 Stutensee, Germany
    • Telephone: +49-6975795891
    • Email: eken190228@gmail.com

3. Safety & Warnings

Important Safety Information

  • ▲ Warning: Keep the drive wheel and packaging out of reach of children under 3 years old. Small parts may pose a choking hazard.
  • ▲ Warning: This drive wheel is only intended for use with Monsieur Cuisine Plus SKMK 1200 C2 / C3 / D4 / E5. Do not use with any other appliance.
  • ▲ Warning: Always disconnect the appliance from the power supply before installing, removing, or servicing the drive wheel.
  • ▲ Warning: Inspect the drive wheel before each use. Do not use if cracked, worn, or damaged. Replace immediately if signs of wear are present.
  • ▲ Warning: Do not overload the appliance. Follow the manufacturer's guidelines for maximum load capacity.

4. Setup and Installation

4.1. Preparation

  1. Ensure the Monsieur Cuisine Plus appliance is turned off and unplugged from the power supply.
  2. Remove any food residue from the drive compartment of the appliance.

4.2. Installation

  1. Open the appliance's drive compartment cover.
  2. If replacing an old drive wheel, carefully disengage it from the drive shaft and motor assembly.
  3. Align the new drive wheel with the drive shaft, ensuring it is securely seated and properly engaged. You should hear a "clic" sound.
  4. Close the drive compartment cover securely.
Detailed view of the 7-branch internal structure of the drive wheel, with an illustration showing proper installation into the appliance base.
Detailed view of the 7-branch internal structure of the drive wheel, with an illustration showing proper installation into the appliance base.
The 7-gear drive wheel installed in a Monsieur Cuisine Edition Plus appliance, highlighting compatibility with SKMK 1200 C2-C3-D4-E5 models.
The 7-gear drive wheel installed in a Monsieur Cuisine Edition Plus appliance, highlighting compatibility with SKMK 1200 C2-C3-D4-E5 models.

5. Operating Instructions

  1. Once the drive wheel is securely installed, follow the operating instructions of your Monsieur Cuisine Plus SKMK 1200 appliance.
  2. Do not overload the appliance beyond its maximum load capacity as specified in your appliance's manual.

5.1. Removal

  1. Turn off and unplug the appliance.
  2. Open the drive compartment cover.
  3. Carefully remove the drive wheel from the drive shaft and motor assembly.

6. Maintenance and Storage

6.1. Cleaning

  • Clean the drive wheel with a dry cloth.
  • Do not use water or liquid cleaners, as this may cause damage or reduce performance.

6.2. Inspection

  • Regularly inspect the drive wheel for signs of wear, cracking, or damage.
  • Replace immediately if signs of wear are present to ensure optimal appliance performance and safety.

6.3. Storage

  • Store the drive wheel in a dry, cool place, out of reach of children.

7. Troubleshooting

  • Drive wheel not engaging: Ensure the drive wheel is correctly aligned with the drive shaft and fully seated. Refer to installation steps.
  • Unusual noise during operation: Disconnect power, remove the drive wheel, and inspect for any visible damage or debris. If damaged, replace the part.
  • Appliance not functioning after installation: Double-check that the appliance is properly plugged in and the drive compartment cover is securely closed. Ensure the drive wheel is compatible with your specific Monsieur Cuisine Plus model (SKMK 1200 C2/C3/D4/E5).

8. Technical Specifications

FeatureDetails
MaterialDurable, food-safe metal and reinforced plastic
CompatibilityMonsieur Cuisine Plus SKMK 1200 C2 / C3 / D4 / E5
Gear Type7-gear (7T)
CertificationFCM, CE, ROHS
OriginMainland China
TypeMixer Parts
Components of the 7-gear blender blade drive wheel, including the main drive wheel, small gear, and gasket.
Components of the 7-gear blender blade drive wheel, including the main drive wheel, small gear, and gasket.
Top and bottom views of the 7T drive wheel, showing its design and connection points.
Top and bottom views of the 7T drive wheel, showing its design and connection points.
Comparison of 5T, 7T, and 12T drive wheels, illustrating different gear configurations.
Comparison of 5T, 7T, and 12T drive wheels, illustrating different gear configurations.

9. Compliance Information

  • This product is made of durable, food-safe metal and plastic, compliant with EU Regulation 10/2011 on food contact materials.
  • Conformity marking: CE
  • Applicable standards: EN 1935:2004

10. User Tips

  • Verify Compatibility: Always double-check your Monsieur Cuisine model number (e.g., SKMK 1200 C2, C3, D4, E5) to ensure this 7-gear drive wheel is compatible. It is not compatible with 'Monsieur Cuisine Smart' or 'Monsieur Cuisine Connect SKMC 1200 A1' unless explicitly stated.
  • Gentle Installation: When installing, ensure the drive wheel clicks into place without excessive force. Misalignment can damage the appliance's drive shaft.
  • Regular Inspection: Make it a habit to quickly inspect the drive wheel for cracks or wear before each use, especially if your appliance is used frequently.

11. Warranty and Support

For any questions regarding product functionality, compatibility, or warranty claims, please contact the manufacturer or EU authorized representative using the contact information provided in Section 2.