HZTZ HZ-8360

Contents

HZTZ 80mm Thermal Receipt Printer HZ-8360 Instruction Manual

Model: HZ-8360

1. Introduction

This manual provides detailed instructions for the HZTZ 80mm Thermal Receipt Printer HZ-8360. This high-speed thermal printer is designed for commercial applications such as restaurants, kitchens, and point-of-sale (POS) systems. It features multiple connectivity options including USB, LAN, and Bluetooth, and boasts an automatic cutter for efficient operation.

HZTZ 80mm Thermal Receipt Printer with connectivity icons

HZTZ 80mm Thermal Receipt Printer with Bluetooth, LAN, and USB connectivity options.

2. Specifications

FeatureSpecification
Printer Name80mm Thermal Receipt Printer
Product ModelPOS-8360
Print MethodDirect Line Thermal
InterfacesUSB / LAN / Bluetooth (optional)
Print CommandESC / POS command
Print Speed220mm/s (max)
Resolution203DPI (8dot/mm)
TPH Reliability100km
Auto CutterPartial
Cutter Life1.5 million cuts
Printing Paper Width79.5 ± 0.5mm
Diameter of Paper Roll80mm
Paper Thickness0.06-0.08mm
Power SupplyInput: AC 110V/220V, 50~60Hz; Output: DC 24V/2.5A
Driver SupportWin2003 / WinXP / Win7 / WIN8 / WIN10 / Linux; Support iOS / Android
Weight0.72KG (Product), 1.5kg (Package)
Product Size160*135*121mm
CertificationCE, FCC, RoHS
Product dimensions and basic specifications table

Detailed product dimensions and specifications.

3. Setup Guide

3.1. Unpacking and Components

Carefully unpack the printer and ensure all components are present. The standard package typically includes the printer unit, power adapter, USB cable, and a starter paper roll.

3.2. Hardware Connection

  1. Power Connection: Connect the power adapter to the printer's power port and then to a suitable power outlet (110-220V).
  2. USB Connection: For direct connection to a computer, plug one end of the USB cable into the printer's USB interface and the other end into your computer.
  3. LAN Connection: For network printing, connect an Ethernet cable to the printer's LAN port and to your network router/switch.
  4. Cash Drawer Connection: If using a cash drawer, connect it to the printer's Cash Box port using an RJ11/RJ12 cable.
Back view of printer with interfaces labeled

Rear view of the printer showing USB, LAN, Cash Box, and Power ports.

3.3. Paper Loading

  1. Press the 'Open cover button' to open the printer's top cover.
  2. Place the thermal paper roll into the paper warehouse with the printing side facing up.
  3. Pull a small amount of paper out past the cutter.
  4. Close the top cover firmly until it clicks into place.
Internal view of printer showing paper loading area

Internal view of the printer, highlighting the paper warehouse and cutter.

4. Driver Installation

The printer requires a driver to function correctly with your computer. Drivers are available for Windows, Linux, iOS, and Android.

4.1. Driver Download

The latest drivers can be downloaded from the official website: http://www.zjiang.com/en/init.php/service/driver.

Screenshot of Zjiang driver download page

Screenshot of the Zjiang driver download page.

4.2. Windows Driver Installation (USB/LAN/Bluetooth)

  1. Insert Driver CD: Insert the provided driver CD into your computer's CD-ROM drive, or download the driver package from the website.
  2. Run Setup: Locate and double-click the setup file (e.g., 'POS Printer Driver Setup Wizard').
  3. Select Language: Choose your preferred installation language (e.g., English) and click 'OK'.
  4. Follow Wizard: Proceed through the installation wizard, accepting the license agreement and selecting the installation destination.
  5. Select Operating System and Printer Model: During the installation, select your operating system (e.g., Windows 10) and the printer model.
  6. Port Configuration:
    • For USB: The installer should automatically detect an available USB port (e.g., USB001). If not, manually select an unoccupied USB port from the 'Ports' tab in printer properties.
    • For LAN (Ethernet):
      1. Perform a self-printing test (see Section 5.2) to obtain the printer's IP address (default is often 192.168.1.100).
      2. In the driver installation, select 'Add Port' and choose 'Standard TCP/IP Port'.
      3. Enter the printer's IP address. Ensure your computer's IP address is in the same network segment as the printer.
    • For Bluetooth:
      1. Ensure your computer's Bluetooth is enabled.
      2. During installation, the wizard will search for Bluetooth devices. Select 'Bluetooth Printer' when found.
      3. Enter the default passkey '1234' when prompted.
  7. Complete Installation: Click 'Install' and then 'Finish' to complete the driver installation.
Diagram showing paper loading and driver installation steps

Visual guide for paper loading and initial driver installation steps.

4.3. Mac OS Driver Installation

For Mac OS users, please refer to the official video guide for detailed installation steps:

Official video guide for connecting the printer to Mac OS.

4.4. Mobile App (iOS/Android)

For mobile device connectivity, dedicated applications are available:

  • iOS App: Download the 'POS-PrinterV1.0' app from the App Store.
  • Android App: Install the 'BT-POSPrinter.APK' from the SDK folder on the driver CD or website.
  • Connection: Open the app, select 'Connect Printer', and choose your printer via Bluetooth or Wi-Fi. The default Bluetooth pairing password is '1234'.

5. Operating the Printer

5.1. Basic Operations

  • Power On/Off: The power switch is located on the printer. Press to 'I' for ON and 'O' for OFF.
  • Paper Feeding: Press the 'FEED' button to advance paper. Release to stop.
  • Self-Printing Test: Turn off the printer. Press and hold the 'FEED' button, then turn on the 'POWER' button. Release the 'FEED' button when the 'PAPER OUT' indicator lights up. The printer will print a test page showing current settings.
  • Hexadecimal Printing: Turn off the printer. Press and hold the 'FEED' button, then turn on the 'POWER' button. Release the 'FEED' button approximately 3 seconds after the 'PAPER OUT' indicator turns off. The printer will enter hexadecimal printing mode. Restart the printer to exit this mode.

5.2. DIP Switch Settings

DIP switches are located on the bottom of the printer and control various functions. Refer to the table below for settings:

ItemFunctionONOFF
1CutterYESNO
2BuzzerYESNO
3Print DensityYESNO
4CN/EN ConvertCHEN
5Empty--
6Baud Rate SetYESNO
7Baud Rate--
8Baud Rate--

Baud Rate Selection Instruction:

No.6No.7No.8Baud Rate
ONONON115200
ONONOFF38400
ONOFFON19200
ONOFFOFF9600

6. Maintenance

6.1. Cleaning the Print Head

Clean the print head if you experience unclear printing, unclear columns, or noisy paper feeding.

  1. Turn off the printer and open the cover, removing the paper roll.
  2. If printing was recently done, wait for the print head to cool down.
  3. Use a soft brush or a cotton swab dampened with ethanol to gently clean the print head. Ensure all parts are lubricated.
  4. Close the cover after cleaning.

Cautions:

  • Always turn off the printer before maintenance.
  • Avoid touching the print head surface with bare hands or metal tools.
  • Do not use gasoline, acetone, or other organic solvents for cleaning.

7. Troubleshooting

  • Messy Code Printing: If printing messy code, ensure the baud rate setting in your PC matches the printer's baud rate (check self-test page).
  • Driver Installation Issues: If the self-printing test works but the printer doesn't work after driver installation, recheck the installation steps and port selection.
  • Cash Drawer Not Opening: Ensure the cash drawer function is enabled in device settings and check the cable connection.
  • Paper Feeding Malfunction: Clean the paper sensor with a soft brush. If the issue persists, contact support.
  • Network Printer Not Printing: Verify network cable and router port functionality. Ensure the printer's IP and router's IP are in the same network segment and that the printer's IP is not occupied by another device. You may need to modify the IP using the provided IP setter software.
  • Fuzzy Printing of Chinese Characters: If Chinese characters print fuzzily, turn on DIP switch SW-3.
  • Auto Cutter Malfunction: Ensure DIP switch SW-1 is OFF and the cutting function is enabled in settings.
  • Red Indicator Flashing: This usually indicates high print head temperature. If printing stops, allow the printer to cool or contact support.
  • Printer Prints Blank Pages: If the self-printing test is blank, the font may be damaged. If printing is blank after a successful self-test, the print head might be faulty.
  • Reset to Default Settings: To reset the IP to default, press the black key in the card slot at the bottom of the printer. To reset Wi-Fi to default, press and hold the black key for about 10 seconds.

8. User Tips

  • Bluetooth PIN: The default PIN for Bluetooth connection is '1234'.
  • Mac Compatibility: The printer is compatible with Mac OS. Refer to the dedicated video guide for setup.
  • Mobile Printing: You can print from iPhone or iPad using the 'POS-PrinterV1.0' app available on the App Store. For Android, use the 'BT-POSPrinter.APK' from the SDK.
  • Paper Roll Size: This printer uses 80mm thermal paper rolls.
  • Cash Drawer Connection: To connect a cash drawer, use an RJ11/RJ12 cable and enable the cash drawer function in the printer driver settings.

9. Warranty and Support

The product comes with 'Shop's Three Guarantees' for after-sale service. For detailed information regarding warranty terms or technical support, please refer to the comprehensive user manual PDF or contact the seller directly.

User Manual (PDF): A detailed user manual in PDF format is available for download. This document contains in-depth guides and additional information not covered in this summary. View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.