H80 3G 4G LTE Portable WiFi Router Instruction Manual

1. Introduction

The HiMISS H80 is a compact and portable 3G/4G LTE WiFi router designed to provide high-speed internet access on the go. With its built-in SIM card slot, you can easily create a personal mobile hotspot, sharing a 150Mbps WiFi connection with up to 10 devices simultaneously. Its long-lasting 2400mAh battery makes it an ideal companion for travelers and outdoor enthusiasts.

2. Package Contents

Please check the box for the following items:

• 1 x H80 WiFi Wireless Router
• 1 x USB Charging Cable
• 1 x Instruction Manual (this document)
• 1 x Rechargeable Lithium-ion Battery (2400mAh)

3. Specifications

4. Setup

4.1. Battery Installation

1. Remove the back cover of the H80 router.
2. Insert the provided 2400mAh lithium-ion battery into the battery compartment, ensuring the contacts align correctly.
3. Replace the back cover.

4.2. SIM Card Installation

1. With the back cover removed (or after battery installation), locate the SIM card slot.
2. Insert a compatible 4G SIM card into the slot. Ensure the SIM card is correctly oriented as indicated by the diagram near the slot.
3. Replace the back cover.

4.3. Powering On/Off

• To Power On: Press and hold the power button (usually located on the side or front) for a few seconds until the OLED display lights up.
• To Power Off: Press and hold the power button again until the device shuts down.

5. Operating Instructions

5.1. Connecting to WiFi

1. Ensure the H80 router is powered on and has a working SIM card with an active data plan.
2. On your device (smartphone, laptop, tablet, etc.), search for available Wi-Fi networks.
3. Select the network name (SSID) broadcast by the H80 router. The default SSID and password can typically be found on a sticker inside the battery compartment (refer to Figure 4.2) or on the device's packaging.
4. Enter the Wi-Fi password when prompted.
5. Once connected, your device should have internet access. The H80 supports up to 10 connected users simultaneously.

5.2. Understanding the OLED Display

The H80 features an OLED display screen that provides real-time information about the device's working condition. Key indicators include:

• Network type (e.g., 4G, 3G) and signal strength.
• Internet connection status.
• Current data usage.
• Wi-Fi status (open/closed) and number of connected users.
• Battery level.

5.3. Accessing Router Settings

To manage advanced settings, such as changing the Wi-Fi name or password, or configuring APN settings:

1. Connect your device to the H80's Wi-Fi network.
2. Open a web browser and enter the default IP address (e.g., 192.168.100.1) into the address bar. This IP address is usually found on a sticker inside the battery compartment (refer to Figure 4.2).
3. Enter the default username (e.g., admin) and password (e.g., admin) to log in.
4. You can now access and modify router settings.

6. Maintenance

• Charging: Use the provided USB cable and a standard 5V/1A USB power adapter to charge the device. Avoid using chargers with higher voltage or current outputs unless specified, as this may damage the battery or device.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to about 50-70% before storage.
• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or abrasive materials.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

7.1. No Internet Connection

• Check SIM Card: Ensure the SIM card is correctly inserted and has an active data plan.
• Signal Strength: Verify that the router is in an area with adequate 3G/4G signal strength, as indicated on the OLED display.
• APN Settings: If necessary, access the router's web interface (Section 5.3) and configure the correct APN settings for your mobile carrier.
• Restart: Power off the router, wait a few seconds, and then power it back on.

7.2. Slow Internet Speed

• Signal Strength: Move the router to a location with better signal reception.
• Connected Users: Reduce the number of connected devices, as too many users can impact speed.
• Data Cap: Check if your SIM card's data plan has reached its high-speed data limit.

7.3. Device Not Turning On

• Charge Battery: Connect the router to a power source using the USB cable and allow it to charge for at least 30 minutes.
• Battery Installation: Ensure the battery is correctly installed.

8. User Tips

• For optimal performance, ensure the device is placed in an area with good cellular signal, away from obstructions.
• Regularly check the device's OLED display for network status, data usage, and battery level to manage your connectivity effectively.
• If experiencing persistent connectivity issues or slow speeds, try restarting the router and checking your SIM card's data plan status.
• Consider setting a strong, unique password for your Wi-Fi network to prevent unauthorized access.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty terms, duration, or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.