Introduction
Thank you for choosing the 5-in-1 Smart Door Lock. This biometric door knob offers advanced security and convenience with multiple unlocking methods. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and security.

Key Features
- 5 Ways to Unlock: Enjoy hassle-free entry with Tuya APP, fingerprint, code, mechanical key, and IC card access.
- Fast Fingerprint Recognition: FPC sensor provides 0.5-second recognition.
- Secure Passcode: Supports 6-10 digit valid passwords and front/rear virtual passwords for enhanced security.
- Tuya APP Integration: Manage your lock remotely, add/delete users, set alarms, and view real-time unlock records via the Tuya Smart app (iOS & Android compatible).
- USB Emergency Power: In case of battery depletion, use a 5V power bank via the USB emergency power socket.
- Low Battery Alarm: Voice alarm prompts when battery voltage is below 4.8V, indicating approximately 100 uses remaining.
- Trial and Error Locking: System locks for 90 seconds and emits an alarm after 5 consecutive password failures or 30 fingerprint failures.
- Remote Temporary Passwords: Generate temporary passwords via the mobile app for guests or service providers.
- Apartment Management Function: Mobile app supports advanced management features for multiple users.


Specifications
| Feature | Detail |
|---|---|
| Product Material | Aluminum alloy |
| Front Handle Size | 6.8 x 5.5 cm (2.67 x 2.16 in) |
| Rear Handle Size | 64 mm (2.51 in) |
| Surface Process | Anodizing |
| Fingerprint Sensor | Semiconductor biological activity recognition |
| Fingerprint Recognition Time | < 0.5 seconds |
| Fingerprint Storage Capacity | 100 pieces |
| Password Storage Capacity | 50 sets (6-10 digits, up to 16 virtual passwords) |
| IC Card Storage Capacity | 30 pieces |
| Mobile App | Tuya Smart (BT) |
| Unlock Methods | Fingerprint, Password, IC Card, BT, Key, Remote Temporary Password |
| Fingerprint Resolution | 500 DPI |
| Rejection Rate (FRR) | < 0.1% |
| False Recognition Rate (FRA) | < 0.001% |
| Power Supply | 4 x AAA Alkaline batteries (not included) |
| Emergency Power Supply | 5V USB socket |
| Battery Life | Approx. 10 months (10 unlocks/day) or 3000 continuous unlocks |
| Low Voltage Alarm | Below 4.8V (approx. 100 uses remaining) |
| Working Temperature | -25°C to 65°C |
| Working Humidity | 20% RH - 90% RH |
| Suitable Door Thickness | Standard 35mm-65mm (1.37 - 2.55 in) |
| Lock Body | 6070 bolt |
| Scramble Code Length | 15 digits total |
| Working Voltage | 4.8-6.2V |
| Product Color Options | Black, Black Silver |

Package Contents
Please check the package contents upon receipt:
- 1 x Front Handle
- 1 x Rear Handle
- 1 x Lock Body
- 7 x Screws
- 2 x IC Cards
- 2 x Mechanical Keys
- 1 set x Tools
- 1 x Packing Box
- 1 x User Manual
Installation Guide
Follow these steps carefully for proper installation:
- Select Accessories and Install Lock Body: Refer to the accessories selection table for appropriate connecting rod and screw lengths based on your door thickness (35mm-65mm). Install the lock body into the door.
- Install Batteries: Unscrew the screws in the square bar to disassemble the front handle. Insert 4 AAA batteries (not included) according to the positive and negative poles.
- Install Front Handle: Insert the front handle into the lock body, ensuring the square bar passes through the lock body.
- Disassemble Rear Handle: Disassemble the rear handle into two parts (Part A and Part B). Keep the screws well.
- Install Rear Handle Part A: Align Part A to the square bar as shown in the figure, then screw connecting screws tightly.
- Install Rear Handle Part B: Install Part B of the rear handle and screw the screws tightly.
- Testing: After finishing the installation, insert and rotate the mechanical key 180 degrees in the keyhole. Then, rotate the front handle to test if the lock can be locked and unlocked successfully.


Operation
Unlocking Methods
- Fingerprint Unlock: Place your registered finger on the fingerprint sensor.
- Password Unlock: Enter your valid 6-10 digit password on the LCD touchscreen panel. The factory default password is 123456.
- IC Card Unlock: Swipe a registered IC card over the IC card sensing area.
- Mechanical Key Unlock: Use the provided mechanical keys in the keyhole for traditional unlocking.
- Tuya App Unlock: Open the Tuya Smart app on your smartphone, connect via Bluetooth, and long-press the unlock icon.

Tuya App Setup and Functions
- Download App: Download 'Tuya Smart' from your device's app store (iOS or Android).
- Add Device: Open Bluetooth on your smartphone. In the app, click "Add device", select "Lock", and then "Start BT distribution network" to connect.
- User Management: Access "User management" to add or delete users and change permissions.
- Door Lock Settings: Configure alarm functions and other lock parameters.
- Real-time Unlock Record: View a history of unlock events.
- Data Cloud Storage: Records of who enters and exits are stored in the cloud.


Adding Fingerprint/Temporary Passcode
- In the app, click "Member Management", select a Member, and then click "Add".
- For fingerprints, place your finger on the recognition area 5 times, adjusting its position slightly each time to ensure full recording.
- For temporary codes, select "Temporary Code" and choose from "Time Limited", "One-time", "Dynamic", or "Custom" passcodes.
Passage Mode
To activate Passage Mode (lock remains unlocked), close "Auto Lock" in the app and unlock the door once. To deactivate, open "Auto Lock" and unlock the door once. Note: In Passage Mode, anyone can unlock the door without specific permissions.
Encrypting Magnetic Cards

To encrypt an IC card, simply swipe it on the IC card sensing area for the first time. The lock will register and encrypt the card for future use.
Maintenance
Battery Replacement
The lock is powered by 4 AAA alkaline batteries (not included). When the battery voltage drops below 4.8V, a voice alarm will sound each time the lock is opened, indicating approximately 100 uses remaining. Replace batteries promptly to avoid being locked out.
Emergency Power
If the batteries completely deplete, you can use a 5V power bank connected to the USB emergency power socket on the lock to temporarily power it and unlock the door.
Cleaning
Wipe the lock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
Troubleshooting
Lockout Due to Failed Attempts
If there are 5 consecutive password verification failures or 30 fingerprint failures, the system will lock for 90 seconds and emit an alarm sound. Wait for the lockout period to end before attempting to unlock again.
Resetting the Lock
Reset Lock with App
In the Tuya Smart app, click "Remove Device" and then "Confirm" to delete and reset the lock from the app. If the lock is offline, slide your finger on the main interface to bring it online before resetting.
Reset Lock with Reset Hole
- Take down the front handle, disassemble it, and access the USB interface area.
- Locate the RET reset hole.
- Press the RET reset hole lightly for 4 seconds with a small object (e.g., a ballpoint pen). You will hear a beep sound every second.
- Release the object when the beeping stops. The system will automatically restore factory settings within 5 seconds, and a voice message will confirm successful restoration.
User Tips
- Always keep at least one mechanical key in a safe, accessible location outside the door for emergency access.
- Regularly check the battery status via the Tuya app or listen for the low battery alarm.
- When registering fingerprints, ensure you capture multiple angles of your finger for better recognition accuracy.
- Utilize the virtual password feature to prevent onlookers from guessing your code.
Warranty and Support
For any issues or support inquiries, please contact the seller or manufacturer. Keep your purchase receipt for warranty claims. This product is designed for reliable performance, and proper installation and maintenance will ensure its longevity.