1. Introduction
The TS-BC670 Vibration Alarm Clock is a portable and versatile alarm solution designed for deep sleepers, students, and individuals who are deaf or hard of hearing. This compact device offers multiple wake-up modes including powerful vibration, an audible alarm, and a flashing light reminder, ensuring you never miss an important event. Its user-friendly design, featuring a cartoon cat aesthetic and a clear pop-up display, makes it an ideal companion for both daily use and travel.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x TS-BC670 Vibration Alarm Clock
- 1 x Screwdriver (for battery compartment)
- 1 x User Manual (English)
3. Product Overview
Familiarize yourself with the components and controls of your TS-BC670 Vibration Alarm Clock.
- Display: Digital time display (0.75" pop-up).
- SNZ Button: Activates backlight/decorative light, snooze function.
- Alarm Set Button: Used to set alarm times.
- Time Set Button: Used to set the current time.
- Up Button: Adjusts values upwards.
- Down Button: Adjusts values downwards.
- Vibration Strength Control: Adjusts the intensity of the vibration alarm.
- Cartoon Cat Design: Decorative element, also serves as a visual indicator.
- Battery Compartment: Located on the back for AA batteries.
- TPE+Copper Wire Hanging Rope: For portability and placement.
4. Setup
4.1 Battery Installation
The TS-BC670 alarm clock is powered by 3 AA batteries (not included). For optimal performance and to avoid frequent replacement, it is recommended to use high-quality, long-lasting batteries.
- Locate the battery compartment on the back of the alarm clock.
- Use the provided screwdriver to open the battery compartment cover.
- Insert 3 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the battery compartment cover and secure it with the screwdriver.
4.2 Initial Power On
Upon successful battery installation, the display will activate. The backlight will not remain constantly lit to conserve battery power. To temporarily illuminate the display, short press the "SNZ" button. The backlight will turn off automatically after 10 seconds of inactivity.
5. Operating Instructions
5.1 Setting the Time
- Press and hold the "Time Set" button until the time display begins to flash.
- Use the "Up" and "Down" buttons to adjust the hours.
- Press the "Time Set" button again to move to minutes, then use "Up" and "Down" to adjust.
- Press "Time Set" once more to confirm and exit time setting mode.
- To switch between 12-hour and 24-hour display formats, press the "Up" or "Down" button while the time is flashing during the setting process.
5.2 Setting Alarms
The alarm clock supports two independent alarm settings (Alarm 1 and Alarm 2).
- Press and hold the "Alarm Set" button until the alarm time (e.g., 6:00 for Alarm 1, 7:00 for Alarm 2) begins to flash.
- Use the "Up" and "Down" buttons to adjust the desired alarm hour.
- Press the "Alarm Set" button again to move to minutes, then use "Up" and "Down" to adjust.
- Press "Alarm Set" once more to confirm the alarm time.
- Repeat the process for the second alarm if needed.
- To activate or deactivate an alarm, short press the "Alarm Set" button outside of setting mode. An icon on the display will indicate if an alarm is active.
5.3 Adjusting Vibration Strength
The alarm clock offers three levels of vibration strength to suit your preference.
- Locate the "Vibration Strength" control (usually a button or switch) on the device.
- Press or toggle the control to cycle through the three available vibration intensity levels.
- Select the level that provides the most effective wake-up experience for you.
5.4 Snooze Function
When an alarm sounds or vibrates:
- To Snooze: Short press the "SNZ" button. The alarm will pause and resume after approximately 10 minutes.
- To Stop Alarm: Long press the "SNZ" button to completely stop the current alarm.
5.5 Backlight and Decorative Light
To conserve battery, the display backlight is not continuously on.
- Backlight: Short press the "SNZ" button to illuminate the display for 10 seconds.
- Decorative Doll Light: The cartoon cat design also features a light. Short press the "SNZ" button to turn on this decorative light for 10 seconds.
6. Maintenance
6.1 Battery Replacement
The alarm clock features a low battery alert function. When the battery level is low, the alarm clock will emit a "BIBI" sound during vibration, and a low battery icon will flash on the screen. If the screen is off, only the "BIBI" sound will occur. At this point, please replace all 3 AA batteries as soon as possible to ensure continued functionality.
6.2 Cleaning
To clean your alarm clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm not sounding/vibrating | Alarm is not activated or batteries are low. | Ensure the alarm is set and activated (check display icon). Replace batteries if low battery alert is active. |
| Display is dim or not lighting up | Backlight is off or batteries are low. | Short press the "SNZ" button to activate backlight. Replace batteries if the issue persists. |
| Time/Alarm settings reset | Batteries were removed or completely drained. | Replace batteries and reset the time and alarm settings. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | TS-BC670 |
| Material | ABS |
| Item Size | 10.5 x 9.3 x 3.4 cm (4.13 x 3.66 x 1.34 inches) |
| Item Weight | 105g (3.7 oz) |
| Power Supply | 3 x AA Batteries (not included) |
| Display | 0.75" Pop-up Digital Display |
| Alarm Groups | Two (Alarm 1 default 6:00, Alarm 2 default 7:00) |
| Vibration Strength | Three adjustable levels |
| Snooze Duration | 10 minutes (default) |
| Backlight/Decorative Light | 10 seconds duration (activated by SNZ button) |
| Display Format | 12/24 hour switching |
| Package Size | 13.2 x 12.5 x 4 cm (5.2 x 4.92 x 1.57 inches) |
| Package Weight | 152g (5.36 oz) |
9. User Tips
- For consistent performance, especially if you rely on the vibration feature, consider using high-capacity alkaline or rechargeable AA batteries.
- Experiment with the three vibration strength levels to find the one that works best for your waking needs.
- When traveling, remember to pack extra AA batteries as they are not included with the product.
10. Warranty and Support
For any questions or support regarding your TS-BC670 Vibration Alarm Clock, please refer to the seller's contact information or the platform's customer service channels. Keep your purchase receipt for any warranty claims.
