Toshiba RAS-M16N3KVP RAS-M07N3KV2 RAS-M24N3KV2 WH-TA01EE WH-TA02EE WH-TA01JE WH-TA03JE

Contents

Toshiba AC Air Conditioner Remote Control User Manual

Models: RAS-M16N3KVP, RAS-M07N3KV2, RAS-M24N3KV2, WH-TA01EE, WH-TA02EE, WH-TA01JE, WH-TA03JE

Introduction

This manual provides instructions for the proper use and maintenance of your replacement Toshiba AC Air Conditioner remote control. This remote is designed to be a high-quality replacement for various Toshiba air conditioner models, ensuring reliable operation of your unit.

Front view of the Toshiba AC remote control showing all buttons.
Figure 1: Front view of the remote control with all buttons visible.

Setup

1. Battery Installation

The remote control requires two AAA batteries (not included). Follow these steps to install them:

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards or press the latch (if present) to open the compartment.
  3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks securely.
Remote control with the battery compartment open, showing where to insert batteries.
Figure 2: Battery compartment open for AAA battery installation.

Operating Instructions

Point the remote control directly at the indoor unit of your air conditioner. Ensure there are no obstructions between the remote and the unit.

Button Functions:

  • POWER ( ⑂ ): Turns the air conditioner ON or OFF.
  • PRESET: Recalls your preferred settings.
  • TEMP ▲ / ▼: Adjusts the temperature setting up or down.
  • MODE: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • SWING: Controls the vertical airflow direction (louver swing).
  • FAN: Adjusts the fan speed (e.g., Low, Med, High, Auto).
  • ONE-TOUCH: Activates a pre-programmed comfortable setting with a single press.
  • FIX: Sets the louver to a fixed position.
  • QUIET: Reduces the operating noise of the indoor unit.
  • POWER-SEL: Selects power consumption levels.
  • HI-POWER: Activates maximum cooling or heating for a short period.
  • TIMER ON / OFF: Sets the timer for the unit to turn ON or OFF automatically. Use ▲ / ▼ to adjust time.
  • CLR (Clear): Clears timer settings or other temporary functions.
  • SET: Confirms selected settings, often used with timer or advanced functions.
  • COMFORT SLEEP: Activates a special mode for comfortable sleep.
  • CHECK: Displays operational data or error codes.
  • CLOCK: Sets the current time.
  • FILTER: Indicates when the air filter needs cleaning. Press to reset after cleaning.
  • RESET: Resets the remote control to factory default settings (may require a pointed object).

Maintenance

Cleaning the Remote Control:

  • Wipe the remote control with a soft, dry cloth.
  • Do not use liquid cleaners, abrasive cleaners, or chemical sprays, as these may damage the remote's surface or internal components.

Battery Replacement:

  • Replace batteries when the remote's display becomes dim or the remote stops responding.
  • Always replace both batteries at the same time with new AAA batteries.
  • Remove batteries if the remote control will not be used for an extended period to prevent leakage.

Storage:

Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

  • Remote not responding: Check if the batteries are inserted correctly and have sufficient charge. Replace batteries if necessary. Ensure there are no obstructions between the remote and the AC unit.
  • AC unit not responding to commands: Verify that the remote control is pointed directly at the AC unit's receiver. Ensure the AC unit is powered on.
  • Buttons not matching original remote: While this is a replacement remote, its button layout may not be identical to your original. However, the core functions are guaranteed to work. Refer to the button function list in this manual.
  • Unsure about compatibility: If you are uncertain whether this remote is suitable for your specific AC model, please provide a photo of your old remote and the exact model number of your AC unit to the seller for confirmation before purchase.

Specifications

FeatureDetail
Model NumbersRAS-M16N3KVP, RAS-M07N3KV2, RAS-M24N3KV2, WH-TA01EE, WH-TA02EE, WH-TA01JE, WH-TA03JE
Wireless CommunicationIR (Infrared)
Frequency433 MHz
Channel1
Power Source2 x AAA Batteries (Not Included)
ColorWhite
Support APPNo
OriginMainland China
CertificationNONE

Warranty and Support

Warranty:

This product comes with a 3-month warranty from the date of purchase. Additionally, a 90+ days money-back return policy is offered.

Customer Support:

If you encounter any issues or have questions regarding the remote control, please contact the seller directly. Providing photos of your device and its model number can help expedite support.

User Tips

  • Always compare the button layout of this replacement remote with your original remote or the AC unit's manual to familiarize yourself with any differences.
  • Even if the button layout is not exactly the same as your original remote, the remote is designed to perform the essential functions for your compatible Toshiba AC unit.
  • For optimal performance, ensure fresh batteries are used and replace them promptly when the remote's functionality diminishes.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.