1. Introduction
Thank you for choosing the Himist Ultrasonic Aroma Diffuser. This device combines the benefits of an aromatherapy diffuser, air humidifier, and a 7-color LED night light to create a pleasant and relaxing atmosphere in your home, room, or spa. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Important Safety Instructions
- Always place the diffuser on a flat, stable surface.
- Do not place the diffuser near heat sources or in direct sunlight.
- Use only clean tap water or distilled water. Do not use hot water.
- Do not exceed the maximum water level indicated.
- Only use 100% natural essential oils. Avoid corrosive oils.
- Keep out of reach of children and pets.
- Unplug the device before cleaning or refilling.
- Do not touch the ultrasonic vibrating plate with bare hands.
- Do not block the mist outlet.
- The diffuser features water-shortage power-off protection. If water runs out, the unit will automatically shut off.
3. Package Contents
Please check the box for the following items:
- 1 x Aroma Diffuser
- 1 x Power Adapter
- 1 x User Manual
Note: Essential oils are not included.
4. Product Overview
Familiarize yourself with the components and controls of your aroma diffuser.


5. Specifications
| Feature | Specification |
|---|---|
| Model Number | 2248YK |
| Product Size | 100mm (Height) x 133mm (Diameter) |
| Power | 12W |
| Input/Output Voltage | AC100-240V DC 24V 0.65mAh |
| Capacity | 300ML |
| Working Time (Physical Buttons) | 1H / 3H / 10SEC (Interval) / Continuous |
| Working Time (Remote) | 1H / 3H / 6H / Continuous |
| Material | PP+ABS (Wood Grain Finished) |
| Ultrasonic Frequency | 2.4MHZ |
| Humidifying Capacity | ≤380ml/h |
| Mist Output | 35-50ML/H |
| Noise Level | <36db |
| Coverage Area | 21-30㎡ |
| Features | 7 Color LED Lighting, Dry Burning Prevention, Timing Function, Water-shortage Power-off Protection |
| Installation | Tabletop / Portable |
| Certification | CE, ROHS |
6. Setup Instructions
Follow these steps to set up your aroma diffuser:
- Place the Diffuser: Place the diffuser on a flat, stable, and water-resistant surface.
- Remove the Cover: Gently lift the top cover of the diffuser.
- Add Water: Using a measuring cup, fill the water tank with clean tap water or distilled water up to the maximum water level line (300ML). Do not overfill.
- Add Essential Oil: Add 2-3 drops of your preferred 100% natural essential oil directly into the water tank. Adjust the amount based on your preference.
- Replace the Cover: Securely place the top cover back onto the diffuser. Ensure it is properly aligned.
- Connect Power: Connect the power adapter to the DC jack at the bottom of the diffuser, then plug the adapter into a standard wall outlet.

7. Operating Instructions
7.1 Using the Physical Buttons
- Mist/Timer Button:
- Press once: Turn on diffuser, high intensity mist mode with 1-hour timer.
- Press twice: High intensity mist mode with 3-hour timer.
- Press third: High intensity mist mode with 10-second interval mist.
- Press fourth: High intensity mist mode with continuous spray.
- Press fifth: Turn off the diffuser.
- Light Button:
- Press once: Turn on LED light, colors will cycle automatically through 8 colors.
- Press twice: Manually set the preferred display color. Continue pressing to cycle through colors.
- Press through all 8 colors: Turn off the light.
7.2 Using the Remote Control

- ON/OFF Button: Press to turn the diffuser on or off.
- Mist Timer Buttons (1H, 3H, 6H, CONT): Press the desired button to set the mist timer for 1 hour, 3 hours, 6 hours, or continuous operation.
- Light Button: Press to turn on the LED light. Each press will cycle through colors or fix a specific color.
- Bright Button: Increases the brightness of the LED light.
- Dim Button: Decreases the brightness of the LED light.

8. Maintenance
Regular cleaning helps ensure optimal performance and extends the lifespan of your diffuser.
- Unplug and Empty: Always unplug the diffuser from the power outlet and empty any remaining water from the tank.
- Clean the Water Tank: Wipe the inside of the water tank with a soft cloth. For stubborn residue, use a cotton swab dipped in white vinegar to gently clean the ultrasonic vibrating plate.
- Clean the Exterior: Wipe the exterior of the diffuser with a soft, damp cloth.
- Air Dry: Allow all parts to air dry completely before reassembling or storing.
- Frequency: Clean the diffuser after every 5-6 uses or every 3-5 days, especially when changing essential oils.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist or low mist output | Lack of water Water level too high Ultrasonic plate dirty Mist outlet blocked | Add water to appropriate level Reduce water level Clean the ultrasonic plate Ensure mist outlet is clear |
| No power | Power adapter not connected No power from outlet Water shortage protection activated | Ensure adapter is securely plugged in Check outlet with another device Refill water tank |
| Light not working | Light function not activated Remote control battery low | Press the 'Light' button on the unit or remote Replace remote control battery |
| Unusual noise | Water level too low Diffuser not on a flat surface | Add water Place on a flat, stable surface |
10. User Tips
- For best results and to prevent mineral buildup, use distilled water.
- The diffuser operates quietly, making it suitable for bedrooms and offices.
- Experiment with different essential oils to find your preferred aroma and therapeutic benefits.
- The 7-color LED light can be used independently of the mist function, serving as a soothing night light.

11. Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For any issues, questions, or support needs, please refer to the seller's contact information provided at the time of purchase. Keep your purchase receipt as proof of purchase.