1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DOOYA DM25TE 1.5/20 Tubular Motor. This intelligent motor is designed for electric zebra blinds and is compatible with 38MM tubes, offering both Tuya WIFF and Tuya Zigbee connectivity options for smart home integration. Please read this manual thoroughly before use to ensure proper function and safety.
2. Safety Information
- Ensure the power supply is disconnected before any installation or maintenance.
- Installation should be performed by qualified personnel or under professional guidance.
- Do not expose the motor to moisture or extreme temperatures outside its operating range (-10°C to +60°C).
- Keep children and pets away from motorized blinds during operation.
- Regularly inspect the motor and wiring for any signs of damage.
3. Package Contents
Please check the package for the following items:
- DOOYA DM25TE 1.5/20 Tubular Motor (Tuya WIFF or Tuya Zigbee version)
- Intelligent Voice Module (integrated or separate, depending on model)
- Settings Key (if applicable)
- Instruction Manual (this document)
4. Specifications

Figure 4.1: DOOYA DM25TE Tubular Motor with key specifications.
| Feature | Specification |
|---|---|
| Model Number | DM25TE-1.5/20 |
| Torque | 1.5 Nm |
| Rolling Speed | 20 r/min |
| Voltage | 100-240V AC |
| Frequency | 50/60 Hz |
| Wattage | 12W |
| Max Current | 0.3A |
| Protection Rating | IP20 |
| Operating Cycle | S2 12min |
| Operating Temperature | -10°C to +60°C |
| Motor Diameter | Ø 25 mm |
| Motor Length | 50.2 cm |
| Compatibility | Suitable for 38MM pipes |
| Connectivity | Tuya WIFF / Tuya Zigbee (model dependent) |
| Certification | CE |

Figure 4.2: Motor dimensions, Intelligent Voice Module, and Settings Key.

Figure 4.3: The motor is designed for use with 38MM diameter pipes.
5. Setup and Installation
5.1 Preparing for Installation
- Ensure the blind tube is 38MM in diameter.
- Verify that the power supply (100-240V AC) is accessible and can be safely disconnected.
- Gather necessary tools: screwdriver, wire stripper, measuring tape, mounting brackets (not included).
5.2 Wiring the Motor
The motor requires connection to a power source. Identify the 'Fireline' and 'Zero line' for proper electrical connection.

Figure 5.1: Motor wiring connections (Fireline and Zero line).
- WARNING: Disconnect power before wiring.
- Connect the Fireline (Live) and Zero line (Neutral) from your power supply to the corresponding wires on the motor.
- Ensure all connections are secure and insulated.
5.3 Mounting the Motor
- Insert the tubular motor into the 38MM blind tube.
- Secure the motor within the tube according to the blind system's design.
- Mount the blind assembly with the motor into the window frame using appropriate brackets.
6. Operating Instructions
6.1 Initial Power-Up and Limit Setting
- After installation, restore power to the motor.
- Use the 'Settings Key' (if present, refer to Figure 4.2) or a compatible remote control/app to set the upper and lower limits of the blind's travel. Consult the specific remote control or app manual for detailed limit setting procedures.
6.2 Smart Home Integration (Tuya WIFF/Zigbee)
- For Tuya WIFF models: Download the Tuya Smart or Smart Life app. Follow the in-app instructions to add a new device and connect the motor to your Wi-Fi network.
- For Tuya Zigbee models: A Tuya Zigbee gateway (hub) is required. Ensure your gateway is set up, then follow the app instructions to add the motor as a Zigbee device.
- Once connected, you can control your blinds via the app, set schedules, and integrate with voice assistants (e.g., Amazon Alexa, Google Assistant) if supported by the Tuya platform.
6.3 Manual Operation (if applicable)
Some models may include a manual override or a physical button for basic up/down control. Refer to your specific product variant for details.
7. Maintenance
- Cleaning: Wipe the motor casing with a dry, soft cloth. Do not use abrasive cleaners or immerse the motor in water.
- Inspection: Periodically check the mounting brackets and wiring for any signs of wear, looseness, or damage.
- Lubrication: The motor is designed to be maintenance-free. Do not attempt to lubricate internal components.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not respond | No power; loose wiring; remote control battery low; motor overheated. | Check power supply and wiring connections. Replace remote battery. Allow motor to cool down if it has been running continuously. |
| Blinds stop at incorrect positions | Limit settings incorrect. | Recalibrate the upper and lower limit settings using the settings key or app. |
| Difficulty connecting to Tuya app | Incorrect network type (WIFF/Zigbee); weak signal; incorrect pairing mode. | Ensure you have the correct motor type (WIFF or Zigbee) and corresponding network. Check Wi-Fi signal strength or Zigbee gateway connection. Follow app pairing instructions carefully. |
9. User Tips
- For optimal smart home performance, ensure your Wi-Fi network is stable for Tuya WIFF models, or your Zigbee gateway is centrally located for Tuya Zigbee models.
- Consider using scenes or automation routines in the Tuya app to schedule blind movements, enhancing convenience and energy efficiency.
- If using voice control, ensure the motor is correctly linked to your voice assistant (e.g., Alexa, Google Home) through the Tuya app.
10. Warranty and Support
DOOYA products are manufactured to high-quality standards. For warranty information and technical support, please refer to the seller's policy or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.