Raise PSA-RZ-67

Raise PSA-RZ-67 CAN Bus Decoder Instruction Manual

Model: PSA-RZ-67 | Brand: Raise

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Raise PSA-RZ-67 CAN Bus Decoder. This device is specifically designed to enable seamless integration of aftermarket Android radio head units with the existing multimedia and control systems of Peugeot 407 vehicles manufactured between 2004 and 2011. The CAN Bus Decoder translates vehicle data, allowing features such as steering wheel controls, door status, and climate information to function correctly with your new Android multimedia player.

2. Product Overview

2.1. Components

The Raise PSA-RZ-67 CAN Bus Decoder is a compact electronic module. Key components include:

  • CAN Bus Decoder Module: The main unit responsible for data translation.
  • 16-Pin Connector: For connecting to the vehicle's wiring harness and the Android head unit.
Raise PSA-RZ-67 CAN Bus Decoder for Peugeot 407, front view with label.
Figure 1: Front view of the Raise CAN Bus Decoder with label. This image shows the front of the Raise CAN Bus Decoder, clearly displaying its model number G-PSA-RZ-67, software version V011.71, hardware VW-NC-0405, and compatibility for Peugeot 407 models from 2004-2010.
Close-up of the Raise CAN Bus Decoder label.
Figure 2: Detailed view of the product label. A detailed view of the product label, confirming the part number G-PSA-RZ-67, software and hardware versions, and vehicle compatibility (Peugeot 407, 2004-2010).
Raise CAN Bus Decoder with 16-pin connector.
Figure 3: 16-pin connector. This image highlights the 16-pin connector on the Raise CAN Bus Decoder, which is used for connecting to the vehicle's wiring harness and the Android head unit.
Top view of Raise CAN Bus Decoder.
Figure 4: Top view of the decoder. The top view of the Raise CAN Bus Decoder, showing the 'Raise' brand logo embossed on the casing.

2.2. Features

  • Designed for Peugeot 407 models (2004-2011).
  • Enables integration of Android radio head units.
  • Supports multimedia player and touch screen functionalities.
  • Translates CAN Bus signals for vehicle data and controls.
  • 16-pin power and CANbus connection.

3. Specifications

Attribute Value
Model Number PSA-RZ-67
Part Number (P/N) G-PSA-RZ-67
Software Version (SW) V011.71
Hardware Version (HW) VW-NC-0405
Compatible Vehicle Peugeot 407 (2004-2011)
Item Type Cables, Adapters & Sockets
Voltage 12 V
Package Dimensions (L x W x H) 12 cm x 12 cm x 12 cm
Package Weight 0.3 kg

4. Setup and Installation

Installation of the Raise PSA-RZ-67 CAN Bus Decoder requires careful attention to vehicle wiring. It is highly recommended that installation be performed by a qualified professional to ensure proper functionality and to avoid damage to your vehicle's electrical system or the product.

4.1. Pre-Installation Checklist

  • Ensure your vehicle is a Peugeot 407 model year 2004-2011.
  • Confirm compatibility with your specific Android radio head unit.
  • Gather necessary tools (e.g., trim removal tools, screwdrivers, wiring connectors).
  • Disconnect the vehicle's battery before starting any electrical work.

4.2. Installation Steps (General Guide)

  1. Remove Existing Head Unit: Carefully remove the factory radio or existing head unit from your Peugeot 407 using appropriate trim removal tools.
  2. Locate Vehicle Wiring Harness: Identify the main wiring harness connected to the factory head unit.
  3. Connect CAN Bus Decoder: The Raise PSA-RZ-67 CAN Bus Decoder typically connects inline with the vehicle's wiring harness and the new Android head unit.
    • Connect the vehicle-side connector to one end of the CAN Bus Decoder.
    • Connect the Android head unit's wiring harness to the other end of the CAN Bus Decoder (the 16-pin connector shown in Figure 3).
    • Ensure all connections are secure and correctly seated. Refer to the wiring diagram provided with your Android head unit for specific pin assignments if necessary.
  4. Route Cables: Carefully route all cables to prevent pinching or interference.
  5. Test Connections: Before fully reassembling, temporarily reconnect the vehicle battery and test the Android head unit's basic functions (power, sound, steering wheel controls, etc.).
  6. Secure and Reassemble: Once confirmed working, secure the CAN Bus Decoder module in a safe location behind the dashboard and reassemble the vehicle's trim and dashboard components.

Warning: Incorrect wiring can cause damage to the product, your Android head unit, or your vehicle's electrical system. If you are unsure, seek professional assistance.

5. Operating Instructions

The Raise PSA-RZ-67 CAN Bus Decoder operates automatically once correctly installed. Its primary function is to interpret and transmit data between your Peugeot 407's CAN Bus system and your aftermarket Android radio head unit.

  • Automatic Operation: The decoder begins functioning as soon as the vehicle's ignition is turned on and the Android head unit receives power.
  • Steering Wheel Controls: After installation, your Android head unit should recognize and respond to the factory steering wheel controls (e.g., volume up/down, track skip, mode). Configuration may be required within the Android head unit's settings.
  • Vehicle Information Display: Depending on your Android head unit's capabilities, the decoder may enable the display of vehicle information such as door status, climate control settings, and parking sensor data on the head unit's screen.

Refer to your Android radio head unit's instruction manual for specific details on configuring and utilizing features enabled by the CAN Bus decoder.

6. Maintenance

The Raise PSA-RZ-67 CAN Bus Decoder is designed for long-term, maintenance-free operation. No regular servicing or software updates are typically required for the decoder itself.

  • Keep Connections Secure: Periodically check that all wiring connections to the decoder and head unit remain secure, especially if you experience intermittent issues.
  • Avoid Physical Damage: Ensure the module is securely mounted and protected from physical impact or excessive moisture.
  • Cleaning: If necessary, gently wipe the exterior of the module with a dry, soft cloth. Do not use liquid cleaners or solvents.

7. Troubleshooting

If you encounter issues after installing the CAN Bus Decoder, refer to the following troubleshooting guide:

Problem Possible Cause Solution
Android head unit does not power on. Incorrect power connection, blown fuse, faulty decoder. Check all power connections. Verify vehicle fuses. Ensure the decoder is correctly seated.
Steering wheel controls do not work. Incorrect CAN Bus connection, head unit not configured. Verify CAN Bus wiring. Check Android head unit settings for steering wheel control configuration.
No sound from speakers. Incorrect speaker wiring, amplifier not triggered (if applicable). Check speaker connections. Ensure the amplifier remote wire (if present) is connected and receiving power.
Vehicle information (e.g., door status, climate) not displayed. CAN Bus data not being read or interpreted by head unit. Ensure the CAN Bus decoder is correctly installed. Check Android head unit settings for vehicle information display options.

If problems persist after attempting these solutions, it is recommended to consult a professional car audio installer or contact the product manufacturer for further assistance.

8. User Tips

  • Verify Compatibility: Before purchasing and installing, always double-check the compatibility of this CAN Bus decoder with your specific Peugeot 407 model year and any existing factory audio systems (e.g., JBL sound systems). Some factory systems may require additional adapters or specific head unit configurations.
  • Professional Installation: For optimal performance and to prevent potential damage, consider professional installation, especially if you are not experienced with car audio wiring.
  • Head Unit Settings: After installation, spend time exploring the settings within your Android head unit. Many features enabled by the CAN Bus decoder, such as steering wheel controls, may require initial setup or calibration within the head unit's software.

9. Warranty and Support

For warranty information and technical support regarding your Raise PSA-RZ-67 CAN Bus Decoder, please refer to the documentation provided at the time of purchase or contact the seller/manufacturer directly. Ensure you have your purchase details and the product's model number (PSA-RZ-67) available when seeking support.

Related Documents - PSA-RZ-67

Preview Raise CAN BUS DECODER G-RZ-VW58 for VW, Skoda, Seat Cars - Technical Guide
Detailed technical specifications and wiring guide for the Raise CAN BUS DECODER (G-RZ-VW58), compatible with various VW, Skoda, and Seat car models. Includes pin assignments and connection details for 40Pin Quadlock and 16-pin interfaces.
Preview SKYFAME Canbus Box: Raise Car Infotainment System Configuration and Debugging Guide
User manual for the SKYFAME Canbus Box and Raise car infotainment system. This guide covers serial port data printing, factory settings, protocol debugging, model selection, and application interface navigation for automotive Android radios, including compatibility for Citroen C5.
Preview Raise AHD Settings and Vehicle Compatibility Guide
Comprehensive guide to Raise AHD settings, including vehicle compatibility, camera input configuration, protocol parameters, and specific platform notes for optimizing automotive display systems.
Preview Protocol Serial Port Data Printing Setting Mode - Raise Technology
User guide detailing the protocol serial port data printing setting mode for Raise Technology automotive infotainment systems. Covers car settings, protocol debugging, data printing, and system configurations for enhanced diagnostics.
Preview RAISE Action Framework: Improving Race and Ethnicity Data Collection in Healthcare
Explore the RAISE Action Framework, a comprehensive guide for healthcare organizations to standardize, collect, and manage race and ethnicity data effectively, promoting health equity and addressing community needs.
Preview Integration of UML-ised Formal Techniques and Tools with RSL
Master's thesis on integrating formal methods and graphical notations in software engineering, focusing on 'UML-ising' RSL with Scheme Diagrams and analyzing Live Sequence Charts (LSCs).