HIENA HYN-023

Contents

Hiena Pro HYN-023 Professional Electric Hair Trimmer User Manual

Model: HYN-023 | Brand: HIENA

1. Introduction

Thank you for choosing the Hiena Pro HYN-023 Professional Electric Hair Trimmer. This device is designed for precise and comfortable hair cutting, beard shaving, and general trimming. It features a durable stainless steel blade, a powerful motor, and convenient Type-C charging. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

2. Safety Information

  • Keep the appliance dry. Do not immerse in water or use in wet environments (except for blade cleaning as instructed).
  • Keep out of reach of children.
  • Ensure the charging cable is not damaged before use.
  • Do not disassemble or attempt to repair the appliance yourself. Contact qualified personnel for service.
  • Avoid pressing the blade against the skin too hard to prevent irritation or injury.
  • Always turn off the trimmer before attaching or removing guide combs and before cleaning.

3. Package Contents

Verify that all items are present in your package:

  • 1 x Hiena Pro Electric Hair Trimmer (Model HYN-023)
  • 4 x Guide Combs (1mm, 3mm, 5mm, 7mm)
  • 1 x Cleaning Brush
  • 1 x USB Type-C Charging Cable
Hiena Pro Electric Hair Trimmer and accessories
Figure 1: Hiena Pro Electric Hair Trimmer with included accessories.

4. Specifications

FeatureSpecification
Brand NameHIENA
Model NumberHYN-023
Item TypeHair Trimmer
Blade MaterialStainless steel
Battery TypeLithium Battery
Battery Capacity600mAh
Battery Charging TimeMore than 2 hours
Battery Life (Working Time)Over 90 minutes (approx. 120 minutes)
Power5W Powerful Motor
Noise Level<60db
Charging InterfaceType-C
FunctionsWet haircut, Dry haircut, Fast Charging, Charging indication
Dimensions (Approx.)Length: 15.0cm (5.90in), Blade Width: 4.0cm (1.57in), Body Width: 2.5cm (0.98in)
CertificationCE
OriginMainland China
Hiena Pro Hair Trimmer dimensions and accessories
Figure 2: Product dimensions and accessory overview.
Type-C charging and battery specifications
Figure 3: Type-C charging details and battery specifications.
Power Rotary Motor specifications
Figure 4: Details of the 5W powerful rotary motor.

5. Setup and Charging

5.1 Initial Charge

Before first use, fully charge the trimmer. Connect the provided USB Type-C charging cable to the charging port at the bottom of the trimmer and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, car charger). The indicator light will show charging status.

Video 1: Product demonstration including charging and accessory attachment.

5.2 Attaching Guide Combs

To achieve desired hair lengths, attach one of the four guide combs (1mm, 3mm, 5mm, 7mm) to the trimmer blade. Ensure the trimmer is OFF before attaching or removing combs. Align the comb with the blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

Attaching guide combs to the trimmer
Figure 5: Guide combs and their attachment to the trimmer blade.

6. Operating Instructions

6.1 Powering On/Off

The trimmer features an up-down push switch. Push the switch upwards to turn the trimmer ON. Push it downwards to turn the trimmer OFF.

Trimmer features diagram
Figure 6: Key features including the up-down push switch and indicator light.

6.2 Trimming Hair and Beard

The Hiena Pro trimmer is suitable for both wet and dry haircuts. Its stainless steel blade with R-shaped rounded corners is designed for safety, sharpness, and to be hair-friendly, preventing pulling or snagging.

  1. Ensure your hair or beard is clean and detangled.
  2. Select the appropriate guide comb for your desired length. For a closer shave, use without a comb.
  3. Turn the trimmer ON.
  4. Hold the trimmer with the blade flat against the skin or at a slight angle, moving against the direction of hair growth.
  5. Use slow, controlled strokes for an even cut.
  6. Regularly clear accumulated hair from the blade during use to maintain performance.
  7. After use, turn the trimmer OFF.
Examples of hair and beard trimming
Figure 7: Demonstrations of accurate cutting for various styles.
Stainless steel blade features
Figure 8: Close-up of the stainless steel blade highlighting safety and cutting efficiency.

7. Maintenance

7.1 Cleaning the Blade

The blade is designed for easy cleaning and can be washed after removal. Always ensure the trimmer is OFF and unplugged before cleaning.

  1. Remove the guide comb if attached.
  2. Use the provided cleaning brush to remove loose hairs from the blade and the trimmer body.
  3. For a more thorough clean, the blade can be carefully detached and rinsed under running water. Ensure the main body of the trimmer does not get wet.
  4. Allow the blade to air dry completely before reattaching it to the trimmer.
  5. Periodically apply a small amount of clipper oil (not included) to the blades to maintain sharpness and smooth operation.
Cleaning brush and blade cleaning
Figure 9: The attached brush helps clear debris from the serrations.

7.2 Storage

Store the trimmer in a cool, dry place away from direct sunlight and moisture. Ensure the trimmer is clean and dry before storing. Keep it out of reach of children.

8. Troubleshooting

  • Trimmer not turning on: Ensure the battery is charged. Connect the Type-C charging cable and allow it to charge for at least 30 minutes before attempting to turn it on again.
  • Poor cutting performance or pulling hair: The blade may be dull or clogged with hair. Clean the blade thoroughly using the provided brush and rinse if necessary. Apply clipper oil to the blades. If the issue persists, the blade may need replacement.
  • Trimmer stops during use: The battery may be low. Recharge the trimmer.
  • Excessive noise or vibration: Ensure the blade is properly seated and secured. Clean the blade area to remove any obstructions.

9. User Tips

  • For best results, always start with a longer guide comb and gradually switch to shorter ones until the desired length is achieved.
  • When trimming beards, comb the hair in the direction of growth before trimming to ensure all hairs are standing upright.
  • Regularly oiling the blades will extend their lifespan and maintain optimal cutting performance.
  • The Type-C charging port offers versatile charging options, making it convenient to charge with various devices like power banks or car chargers.

10. Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.