1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BQCC 1din 5" HD Touch Screen Car MP5 Player. This multimedia system offers a wide range of features including wired/wireless Android Auto and Apple CarPlay, Mirrorlink, Bluetooth connectivity, FM radio, USB media playback, and support for reversing cameras and driving recorders. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
2. Safety Information
- Ensure the unit is installed by a qualified professional to prevent damage to the vehicle or the device.
- Always connect the power supply correctly (DC 12V, negative ground). Incorrect wiring can cause damage or fire.
- The unit features a power supply positive and negative pole reverse connection protection function. If the power line positive and negative poles are connected incorrectly, it will not cause the circuit board to burn.
- Do not operate the device in a way that distracts you from driving.
- Keep the volume at a safe level to remain aware of road conditions.
- If the product emits smoke or unusual odors, immediately disconnect the power and seek professional assistance.
This diagram illustrates the built-in wiring protection. Correct wiring prevents damage (top, green checkmark), while incorrect wiring without protection can burn out the circuit board (bottom, red cross).
3. Package Contents
Upon unpacking, please verify that all the following items are included:
- 1x Host Unit (Car MP5 Player)
- 1x User Manual
- 2x Power Cords
- 1x 21-key Silicone Remote Control
- 2x Disassembly Keys
- Optional: Reversing Camera (if purchased with the unit)
The image shows the main unit, remote control, disassembly keys, power cable, and the operation manual. Note that accessories may be updated; actual receipt of goods prevails.
4. Product Overview
4.1. Unit Dimensions
The unit has an installation size of 178x50mm (7.01x1.97 inches) and a front panel size of 188x75mm (7.40x2.95 inches). The host depth is 80mm (3.15 inches).
4.2. Front Panel Introduction
Key features include: Remote control signal receiving head (IR), Type-C Charge port, Volume +/- / Switch/Mute knob, USB reading port, and Up and down songs / pause/play knob.
4.3. Rear Panel Introduction
The rear panel includes: ISO standard plug (Power plug/speaker plug), Microphone input (3.5mm), Right channel output, Video output 2, Radio antenna, Reversing camera input, Rear USB, Left channel output, and Video output 1.
5. Installation
5.1. General Installation
This unit is a single-DIN car MP5 player. Ensure your vehicle has a compatible single-DIN slot for installation. Professional installation is highly recommended.
5.2. Wiring Diagram
This diagram illustrates all necessary connections. Key connections include:
- Power: Yellow (B+) to +12V constant, Red (ACC) to +12V switched, Black (GND) to ground.
- Speakers: Connect front and rear speakers (White, Green, Purple, Gray wires) ensuring no speaker cable is grounded or shared.
- Antenna: Blue (ANT) to radio antenna.
- Illumination: Green (ILLUMINATION) to vehicle illumination circuit.
- Steering Wheel Control: Brown (KEY) to steering wheel control wire.
- Reversing Camera: Pink (REVERSE) to reversing camera trigger, Orange (BRAKE) to parking brake cable.
- Audio/Video: RCA outputs (L-OUT, R-OUT, V-OUT1, V-OUT2), CVBS input, Reversing Video Input (CAMIN).
- USB: USB Port for media and charging.
Important Notes:
- For normal operation, the Yellow (B+) and Red (ACC) lines must both receive +12V power simultaneously.
- The Yellow (B+) line maintains power for memory function.
- Ensure speaker cables are not grounded, shared, or touching other lines to prevent sound distortion or unit overheating.
5.3. Reversing Camera Installation
The reversing camera is typically installed at the rear of the car.
- Connect the camera's power wire (red) to the vehicle's reverse light power.
- Connect the camera's ground wire (black) to vehicle ground.
- Connect the camera's video output cable to the "CAMIN" input on the car MP5 player.
- Connect the pink "REVERSE" trigger wire from the player's wiring harness to the vehicle's reverse light positive wire.
Caution: If a reversing camera is not installed, do not connect the REVERSE/BACK cable to any location. Otherwise, the unit may automatically enter reverse mode, causing malfunction.
6. Initial Setup
6.1. Power On/Off
After successful installation, turn on your vehicle's ignition. The unit should power on automatically. To turn off, turn off the ignition. If the unit does not power on, refer to the Troubleshooting section.
6.2. System Settings Password
The factory default system setup password is 113266. This may be required for advanced settings or factory resets.
6.3. Language Selection
The unit supports multiple OSD languages including English, Chinese, Spanish, Portuguese, Russian, German, French, Polish, Turkish, Arabic, Hebrew, Italian, Czech, Japanese, Korean, and Thai. Navigate to the settings menu to select your preferred language.
7. Operating Instructions
7.1. CarPlay / Android Auto (Wired & Wireless)
This feature allows you to connect your mobile phone to the car MP5 player, enabling access to various phone functions directly from the unit's screen.
The image displays the CarPlay interface with common apps like Phone, Music, Maps, Messages, and Settings. Both wired and wireless connections are supported for Apple CarPlay and Android Auto.
Wired Connection:
- Simply connect your mobile phone to the unit's USB port using a data cable. The unit will automatically enter the CarPlay or Android Auto interface.
Wireless Connection:
- First, enable Bluetooth and Wi-Fi on your mobile phone.
- Connect your phone to the unit via Bluetooth.
- The unit will then automatically enter the CarPlay or Android Auto interface.
- Note: The signal is transmitted via Wi-Fi. If the Wi-Fi function is turned off on your phone, CarPlay/Android Auto will disconnect.
For Android Auto, ensure you have "Android Auto" software installed from Google Play and are using an Android 6.0 or higher phone with a valid data cable.
7.2. Mirrorlink (Wired Screen Projection)
Mirrorlink allows wired screen projection for mobile phones, compatible with both Apple and Android devices. This mirrors your phone's screen onto the car MP5 player.
The image demonstrates a mobile phone screen being projected onto the car MP5 player via Mirrorlink. For Android devices, you may be prompted to install an APP software. After installation, reconnect the data cable to enter mirroring mode. For iPhone, direct control from the car screen is not supported; for Android, control from both screens is possible.
- iPhone Mirrorlink: Connect your iPhone via USB. The phone screen content will be projected. Direct control from the car screen is not supported.
- Android Mirrorlink: Connect your Android phone via USB. You may be prompted to install an APP. After installation, reconnect the USB cable. The screen will be mirrored, and you can operate it from both the player screen and the phone screen.
- Note: For both, audio transmission requires a successful Bluetooth connection.
7.3. Bluetooth Connection
The unit supports Bluetooth version 5.0 for hands-free calls and high-quality music playback.
The interface allows dialing, viewing contacts, and playing music via Bluetooth. The default Bluetooth name is "SWL-BT".
- Turn on the unit and enable Bluetooth on your mobile phone.
- Search for the unit's Bluetooth name (default: SWL-BT) on your phone.
- Select the unit and pair. The pairing password is "XXXX" (refer to the unit's Bluetooth settings for the exact password).
- Once connected, you can make/receive calls and play music through the car speakers.
7.4. FM Radio
The built-in FM radio module supports storing up to 18 radio stations.
The display shows the current frequency (e.g., FM-1 87.50 MHz) and preset buttons (P1-P6) for quick access to saved stations. Use the "Scan" or "AS" (Auto Store) functions to find and save stations.
7.5. USB Media Playback
The unit can read audio, video, and picture files from a USB disk. It features two USB 2.0 ports and a Type-C charging port.
The image shows the USB port for media reading (plug and play, fast response) and the Type-C port for fast charging (5V-2.1A).
- Insert a USB disk into the USB reading port. The unit will automatically detect and play compatible media files.
- Supported audio formats: MP3/AAC/APE/OGG/M4A/RA/WAV.
- Supported video formats: H263/H264/H265/DIVX HD(720P 1080I 1080P)AVI/FLV/MKV/MPEG/MP4/WMV9/VC/ASF/TS/QT.
- Supported image formats: JPEG/PNG/BMP/GIF/TIFF.
7.6. Steering Wheel Control Learning
The unit supports learning functions from your original car's steering wheel buttons, allowing you to control the MP5 player conveniently.
After successfully pairing, use the setting interface to assign functions to your steering wheel buttons. Press and hold a button on your steering wheel, then select the corresponding function icon on the unit's screen to complete the learning process.
7.7. Reversing Camera (Optional)
If an optional reversing camera is connected, the unit will automatically switch to a full-screen reversing image when the vehicle is in reverse gear.
The image shows the view from an optional reversing camera displayed on the unit's screen, with guidelines for parking assistance.
7.8. Driving Recorder (Optional)
If an optional driving recorder is connected, you can play back recorded video on the spot to review events, such as emergencies or accident disputes.
The image illustrates the playback of a driving recorder video on the unit's screen, useful for reviewing incidents.
7.9. Remote Control Function
The unit comes with a 21-key silicone remote control for convenient operation. The actual remote control style may vary.
Remote Control Functions:
- Mute: Mute On/Off
- Mode: Switch mode
- Power: Power On/Off
- Volume +/-: Adjust volume
- Enter: Play / Pause
- Next/Previous Track: Navigate tracks
- Call: Answer/End calls
- Menu: Access menu
- Number Buttons: For direct input.
Note: Before using, install two AAA batteries. If the remote control is unresponsive, remove, clean, and reinsert the batteries. If it still doesn't work, replace the batteries.
8. Troubleshooting
This section addresses common issues and provides solutions. If problems persist, please consult a qualified technician.
8.1. Cannot Boot Normally
- Wiring Check: Ensure the Yellow (constant +12V), Red (ACC +12V switched), and Black (ground) wires are correctly connected. Incorrect or incomplete connections will prevent the unit from booting.
- Fuse Check: Verify if the fuse on the Yellow wire is intact. If broken, replace it. If the fuse is fine, try twisting the Yellow and Red wires together, then turn the ignition key and press the unit's power button.
- Short Circuit Protection: If fuses repeatedly blow, the unit's protection circuit may have short-circuited. Professional repair is needed.
- Original Car Wiring: Do not directly plug the original car harness into the new unit without verifying compatibility. Use the provided power cords.
8.2. Automatic Shut-down
- Incorrect Cable Connection: If the blue (automatic antenna power supply) cable is connected to the unit's power cable, automatic shutdown will occur. Correct the wiring.
- Unstable Voltage: Test the power supply with a stable 12V-5A source. If the unit still shuts down, the power supply is faulty. If it works correctly with a stable power supply, the unit itself may have an issue.
8.3. Noise Issues
- Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Avoid excessively high volumes.
- Grounded Speaker Cable: Connect the speaker cable directly to the unit's speaker cable, ensuring it is not grounded elsewhere.
8.4. Remote Control Not Working
Use your phone camera to check the remote control's IR emitter. Point the remote at the camera and press a button; if you see a light flash on your phone screen, the remote is transmitting. If not, replace the AAA batteries.
8.5. Settings Not Saved (No Memory)
- Wiring Error: The Yellow (constant +12V) and Red (ACC +12V switched) wires are either connected together or reversed. Ensure Yellow is to constant +12V and Red is to switched +12V.
8.6. Bluetooth Not Working
Ensure Bluetooth is enabled on both the unit and your phone. Search for the unit's Bluetooth name (SWL-BT) and connect. If issues persist, try resetting the unit.
8.7. Product Emits Smoke
Immediately replace the FUSE. If the problem is not resolved, the internal circuit may be burned. Seek after-sales service.
8.8. Sound Cannot Be Adjusted / No Sound
- No Sound After Installation: This is usually due to wiring errors or a short-circuited speaker wire. Check speaker wiring for shorts and reconnect. Ensure the correct number of speaker cables are connected (e.g., 4 speaker cables for 2 speakers).
- No Sound After A While: Disconnect all speaker cables from the unit and connect an external speaker to the gray and purple wires of the unit's tail line. If sound, the car's speaker line is short-circuited or the speaker is damaged. If no sound, the unit is faulty.
- Volume Knob: If the volume knob is broken, it may need replacement.
- Reset: Try resetting the unit or unplugging and replugging the power cord.
8.9. Reversing Camera Not Displaying
This is often due to incorrect or missing wiring. Refer to the "Reversing Camera Installation" section for correct wiring. If the camera is properly wired but not lit, it may be faulty and require replacement.
8.10. USB Devices Cannot Be Played
Format the USB flash drive to FAT32. Re-download media files and try again. If the issue persists, replace the USB flash drive.
8.11. FM Does Not Receive Radio Stations
Ensure the antenna plug is fully inserted and the antenna is not disconnected or faulty. Try searching for stations using the "AS" (Auto Store) button. If problems persist, try inserting a screwdriver or metal strip into the antenna port as a temporary antenna.
8.12. Restore to Factory Settings
If CarPlay, Android Auto, or Mirrorlink connections are abnormal, you can restore factory settings via: "Basic Settings" -> "Restore Factory" -> Select "YES". If a reset button is available on the panel, pressing it will also restore factory settings.
9. Specifications
| Feature | Specification |
|---|---|
| Model | 152W (New F152W) |
| Type | Single-spindle MP5 car player |
| System | Allwinner melis system |
| Software Solution | F133 |
| CPU | F133 |
| Running Memory | 1Gbit DRAM |
| Display Size | 5.0 inches |
| Resolution | 1280x720 |
| Is Touch Screen | Yes |
| Built-in Screen | Yes |
| Power Supply Voltage | 12~14.4V DC, Negative Ground |
| Max Current Consumption | 15A |
| Output Power | 60Wx4 |
| Working Voltage | 10~14.8V |
| Working Temperature | -20~60℃ |
| Bluetooth Version | 5.0 (Default name: SWL-BT) |
| Bluetooth Chip | AB5301B |
| Amplifier Chip | CD7388CZ |
| Radio IC | QN8035 |
| Radio Frequency | FM 87.5~108.0MHz |
| TF/Micro SD Slot | 1 |
| USB Interface | USB 2.0 read x2 (Rear USB) |
| Interface Type | USB TYPE-C (charging function) |
| RCA Audio Output | 2 channels (Left + Right) |
| Video Output | 2 channels |
| External Microphone Input | Support (external microphone optional) |
| Video Input | 1 channel |
| Reversing Video Input | 1 channel |
| Mobile Phone Interconnection | Support (Wired/Wireless Android Auto/Apple CarPlay, Mirrorlink) |
| Reversing Image | Support (camera optional) |
| Play Video Warning | Support |
| Driving Recorder | Support (recorder optional) |
| Audio Formats | MP3/AAC/APE/OGG/M4A/RA/WAV |
| Video Formats | H263/H264/H265/DIVX HD(720P 1080I 1080P)AVI/FLV/MKV/MPEG/MP4/WMV9/VC/ASF/TS/QT |
| Image Formats | JPEG/PNG/BMP/GIF/TIFF |
| OSD Language | English, Chinese, Spanish, Portuguese, Russian, German, French, Polish, Turkish, Arabic, Hebrew, Italian, Czech, Japanese, Korean, Thai |
| Material | ABS+metal |
| Item Weight | 0.68KG (unit), 2kg (package) |
| Certification | CE |
| Factory Set Password | 113266 |
10. User Tips
- Power Off Completely: If the unit remains in sleep mode and consumes battery, ensure proper wiring (Yellow to constant +12V, Red to switched +12V) or check system settings for a full power-off option. Some vehicles may require additional wiring to fully cut power when the ignition is off.
- Vehicle Compatibility: This unit is designed for a universal single-DIN slot. Before purchasing or installing, verify your vehicle's dashboard compatibility and available space.
- USB Playback Warning: If you encounter a "Can not watch video while driving" message when playing videos via USB, you can usually turn off the "Warning" function in the unit's settings.
- FM Radio Reception: For optimal FM radio reception, ensure the antenna is fully inserted and in good condition. If reception is poor, try a different antenna or check for loose connections.
11. Warranty and Support
The BQCC 1din 5" HD Touch Screen Car MP5 Player comes with a 1-year manufacturer's limited warranty for defective items (excluding items damaged and/or misused after receipt). Accessories typically come with a 3-month warranty.
For detailed instructions, specifications, and troubleshooting, please refer to the comprehensive user manual available in PDF format. You can access the PDF manual via the following link: User Manual (PDF).
For further assistance or warranty claims, please contact BQCC customer support or your retailer.
