1. Introduction
This manual provides essential information for the safe and effective use, installation, maintenance, and troubleshooting of your new Olevo Blender Blade. This blade is designed as a replacement part for specific Monsieur Cuisine Edition Plus models. Please read this manual thoroughly before use and keep it for future reference.
2. Product Information
- Product Name: Blender Blade for Monsieur Cuisine Edition Plus SKMK1200 C3/D4/E5 SKMK1100
- Model: MC-BB-EP-001
- Batch Number: LP20260212-172
Figure 1: Olevo Blender Blade and compatible Monsieur Cuisine Plus appliance.
3. Safety & Warnings
Important Safety Information
- Warning: Keep the blade and packaging out of reach of children under 3 years old. The blade is extremely sharp and may cause serious cuts if mishandled.
- Warning: This blade is only intended for use with Monsieur Cuisine Edition Plus SKMK1200 C3/D4/E5 / SKMK1100A1. Do not use with any other appliance.
- Warning: Always disconnect the appliance from the power supply before installing, removing, or cleaning the blade.
- Warning: Do not touch the blade edges directly. Use the provided tool or a thick cloth when handling.
- Warning: Inspect the blade before each use. Do not use if cracked, bent, or damaged. Replace immediately if signs of wear are present.
- Warning: Do not overload the bowl or process hard, frozen, or bone-in ingredients beyond the appliance's capacity.
4. Installation Instructions
- Preparation: Ensure the Monsieur Cuisine Edition Plus appliance is turned off and unplugged from the power supply. Remove any food residue from the cooking bowl.
- Aligning the Blade: Carefully align the new blender blade with the drive shaft located in the bottom of the cooking bowl.
- Securing the Blade: Press the blade firmly downwards until it locks securely into place. Ensure it is stable and does not wobble before proceeding.
Figure 2: Ensure the 7-tooth blade is correctly aligned for installation.
5. Operating Instructions
- Once the blade is securely installed, refer to the original operating instructions of your Monsieur Cuisine Edition Plus appliance.
- Select the appropriate mixing or cutting program for your desired task.
- Always ensure that the cooking bowl is not overloaded, as this can strain the appliance and the blade.
6. Maintenance
6.1. Cleaning
- Always clean the blade immediately after each use to prevent food buildup and ensure hygiene.
- Turn off and unplug the appliance before cleaning.
- Use the provided tool or a thick cloth to carefully lift the blade from the drive shaft, avoiding direct contact with the sharp edges.
- Wash the blade with warm, soapy water and a non-abrasive brush.
- The blade is dishwasher-safe and can be placed on the top rack of your dishwasher.
- Dry thoroughly before storage.
6.2. Storage
- Store the blade in a dry place, out of reach of children.
- If a protective cover was provided, use it to avoid accidental cuts during storage.
Figure 3: An extra washer is included as a spare for maintenance.
6.3. Replacement
- Replace the blade if it becomes dull, bent, or damaged to ensure safe and efficient mixing and cutting performance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blade does not fit or is loose | Incorrect model compatibility; improper installation. | Verify your appliance model number against the compatible models (SKMK1100A1, SKMK1200 C3/D4/E5). Ensure the blade is aligned and pressed firmly until it locks. |
| Poor blending/chopping performance | Blade is dull or damaged; bowl overloaded; incorrect program setting. | Inspect the blade for damage and replace if necessary. Reduce the amount of ingredients in the bowl. Refer to your appliance manual for optimal program settings. |
| Unusual noise during operation | Blade not properly seated; foreign object in the bowl; worn blade. | Turn off and unplug the appliance. Re-seat the blade. Check for any obstructions. If noise persists and blade is old, consider replacement. |
8. Technical Specifications
| Feature | Details |
|---|---|
| Material | Food-grade Stainless Steel, Nylon |
| Weight | Approx. 279g / 9.8oz |
| Knife Head | 4 Leaf |
| Card Teeth | 7 Teeth |
| Compatibility | Monsieur Cuisine Edition Plus SKMK1200 C3/D4/E5 / SKMK1100A1 (Fits IAN 303806, 317553, 362034, 379746, 384165, 389505) |
| Certifications | CE, ROHS, EU Regulation 10/2011 (Food Contact Materials) |
Figure 4: Close-up of the 7-tooth drive mechanism.
9. User Tips
- Verify Compatibility: Before purchasing or installing, double-check your Monsieur Cuisine Edition Plus model number (e.g., SKMK1100A1, SKMK1200 C3/D4/E5) and ensure it has a 7-tooth drive shaft for a perfect fit.
- Regular Inspection: Make it a habit to quickly inspect the blade for any signs of wear or damage before each use. This helps maintain performance and safety.
- Immediate Cleaning: Cleaning the blade right after use prevents food from drying and sticking, making the cleaning process much easier and more effective.
- Use the Washer: Always ensure the washer is correctly in place during installation to prevent leaks and ensure proper function. Keep the spare washer handy.
10. Manufacturer & Support Information
Manufacturer:
Shenzhen Lipeng Yuan Technology Co., Ltd.
EU Authorized Representative:
- Name: ZHEKAN GmbH
- Address: Romeracker 8, 76297 Stutensee, Germany
- Telephone: +49-6975795891
- Email: eken190228@gmail.com
For detailed product guides and documents, you may refer to the official user manual PDF: View User Manual (PDF)
