Hobbywing 10BL80A G2 RTR

Contents

Hobbywing 10BL80A G2 RTR Brushless ESC Instruction Manual

Model: WP-10BL80-80A-RTR G2

Brand: Hobbywing

1. Introduction

The Hobbywing 10BL80A G2 RTR Brushless Electronic Speed Controller (ESC) is designed for 1/10 scale short course trucks, trucks, on-road vehicles, and buggies. This high-performance ESC offers reliable power delivery and precise control for your remote-controlled vehicle. It supports 2-3S LiPo or 6-9 Cell NiMH batteries and features a built-in 6V/3A BEC.

2. Package Contents

Please check the package contents carefully upon unboxing. If any items are missing or damaged, contact your retailer.

  • 1 x Hobbywing 10BL80A G2 RTR Brushless ESC
  • 1 x Program Card (Optional, depending on your choice)
  • 1 x User Manual
  • Zip Ties
Hobbywing 10BL80A G2 RTR Brushless ESC with Program Card, User Manual, and accessories
Figure 2.1: Package contents including ESC, program card, manual, and zip ties.

3. Specifications

FeatureSpecification (WP-10BL80 G2 RTR)
ModelWP-10BL80 G2 RTR
Continuous Current80A
Motor TypeSensorless/Sensored Brushless Motor (only in sensorless mode)
Applications1/10 Short Course Truck, Truck, 1/10 On-Road, Buggy, Short Course Truck (2WD)
Motor Limit (with 3652/3660 size motor)2S LiPo: KV≤6000; 3S LiPo: KV≤3500
LiPo/NiMH Cells2-3S LiPo / 6-9 Cell NiMH
BEC Output6V/3A
FanPowered by built-in BEC
Size (L x W x H)46mm x 35.5mm x 35.5mm
Weight (w/o wires & connectors)99g
Programming PortShared with fan interface
Specifications table for Hobbywing 10BL80A G2 RTR ESC
Figure 3.1: Detailed specifications for the ESC.
Dimensions of the Hobbywing 10BL80A G2 RTR ESC
Figure 3.2: Physical dimensions of the ESC.
Weight of the Hobbywing 10BL80A G2 RTR ESC
Figure 3.3: Weight of the ESC (99g).

4. Setup and Connections

Proper connection of the ESC to your motor, receiver, and battery is crucial for safe and optimal performance. Follow the diagram below for correct wiring.

  1. Motor Connection: Connect the three motor wires from the ESC to your brushless motor. Ensure correct phase matching if applicable (A-A, B-B, C-C).
  2. Receiver Connection: Plug the ESC's throttle cable (usually black, red, white wires) into the throttle channel (CH2) of your receiver.
  3. Battery Connection: Connect your LiPo or NiMH battery to the ESC's power input wires. Ensure the polarity is correct (red to positive, black to negative). The ESC supports various plug types such as T-Plug, XT60, TRX, Tamiya, and EC5.
  4. Program Card (Optional): If using a program card, connect it to the programming port on the ESC. This port is often shared with the cooling fan interface.
Wiring diagram for Hobbywing ESC, Motor, Receiver, and Battery
Figure 4.1: Connection diagram for the ESC system.
Various connector plugs for RC vehicles
Figure 4.2: Examples of compatible connector plugs.

5. Operating Instructions

Once all connections are securely made, you can begin operating your RC vehicle.

  1. Power On: Turn on your transmitter first, then connect the battery to the ESC. The ESC will perform a self-test and emit a series of beeps.
  2. Throttle Calibration: If the ESC does not respond correctly to throttle input, you may need to calibrate the throttle range. Refer to the full user manual for detailed calibration steps.
  3. Driving: Use your transmitter's throttle trigger to control the motor speed. Push forward for acceleration, pull back for braking, and further back for reverse (if enabled).
  4. Power Off: Disconnect the battery from the ESC first, then turn off your transmitter.

6. Programmable Items

The Hobbywing 10BL80A G2 RTR ESC offers several programmable parameters to fine-tune its performance. These can typically be adjusted using a program card (if included) or via transmitter input (refer to the full manual for details).

Programmable ItemOptionsDescription
1. Running ModeFwd/Br, Fwd/Rev/BrControls how the ESC handles forward, reverse, and brake functions.
- Fwd/Br: Forward with Brake. This is a common running mode.
- Fwd/Rev/Br: Forward/Reverse with Brake. The vehicle only brakes on the first time you push the throttle trigger to the reverse area. If the motor stops, pushing the trigger again will engage reverse. If the motor does not completely stop, pushing the trigger to reverse will only brake.
2. Drag Brake Force0%, 5%, 15%, 20%, 25%, 30%, 40%Refers to the brake force generated by the motor when the throttle trigger returns to neutral position. Choose an appropriate value according to your vehicle type and track conditions.
3. Low Voltage CutoffDisabled, 2.6V/Cell, 2.8V/Cell, 3.0V/Cell, 3.2V/Cell, 3.4V/CellThis function prevents excessive discharge of Lithium batteries. The ESC monitors the battery voltage, and once the voltage falls below the set threshold, the power output will be reduced, and after a few seconds, it will be completely cut off. For NiMH batteries, it is recommended to set this parameter to "Disabled".
4. PunchLevel 1, Level 2, Level 3, Level 4This item controls the throttle response. A lower value results in slower response, while a higher value provides faster response, which can help the driver control the vehicle during startup.
5. Max. Brake Force25%, 50%, 75%, 100%This ESC provides proportional braking function. The braking effect is determined by the position of the throttle trigger. It sets the percentage of available braking power when full brake is applied. A large amount will shorten the braking time but may damage your pinion and spur gear.
Programmable items table for Hobbywing ESC
Figure 6.1: Programmable parameters and their descriptions.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ESC.

  • Keep the ESC clean and free from dirt, dust, and moisture. Use a soft brush or compressed air to remove debris.
  • Regularly inspect all wires and connectors for signs of wear, damage, or loose connections.
  • Ensure the cooling fan (if present and operational) is free from obstructions to prevent overheating.
  • Store the ESC in a dry, cool place when not in use.

8. Troubleshooting

If you encounter issues with your ESC, refer to the following common troubleshooting steps:

  • No Power: Check battery connections, ensure the battery is charged, and verify the ESC's power switch is on.
  • Motor Not Running: Check motor connections, ensure the motor is not seized, and verify throttle calibration.
  • Erratic Behavior: Check for loose wiring, interference from other electronics, or incorrect ESC programming. Recalibrate the throttle range if necessary.
  • Overheating: Ensure adequate airflow to the ESC. Check motor limit specifications to ensure the motor is not too powerful for the ESC. Reduce drag brake or punch settings if overheating persists.
  • LED Indicators: Pay attention to any LED indicators on the ESC, as they often provide diagnostic information (refer to the full manual for specific LED codes).

9. User Tips

  • Always ensure your battery is fully charged before use to prevent low voltage cutoff issues during operation.
  • Experiment with the 'Drag Brake Force' and 'Punch' settings to find the optimal balance for your driving style and vehicle type.
  • For extended run times and cooler operation, consider using a motor within the lower end of the recommended KV range for your battery setup.

10. Warranty and Support

This product comes with a 12-month manufacturer's limited warranty for defective items. The warranty period begins from the date of receipt. Defective items must be reported and returned within the warranty period and in their original packaging, if possible.

For technical support, warranty claims, or further assistance, please contact your original retailer or the Hobbywing customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.