1. Introduction
The NEEWER NW700-S is a versatile and high-performance TTL flash speedlite designed for Sony MI Hot Shoe cameras. It offers advanced features such as TTL auto flash, High-Speed Sync (HSS) up to 1/8000s, and a unique TCM (TTL Convert to Manual) function, making it suitable for both beginners and professional photographers. With a powerful GN60 guide number and flexible flash head adjustments, the NW700-S provides precise and creative lighting control for various photographic scenarios.
Figure 1: Front and side view of the NEEWER NW700-S TTL Flash Speedlite, showcasing its design and LCD display.
2. Safety Information
- Do not disassemble or modify the product. Repairs should only be performed by authorized service personnel.
- Keep the product dry. Do not operate with wet hands or expose to water or rain.
- Do not use the flash in the presence of flammable gases, chemicals, or other materials.
- Use only recommended batteries (AA MH-Ni). Incorrect battery usage may result in leakage, overheating, or explosion.
- Avoid direct eye exposure to the flash, especially at close range, as it may cause temporary vision impairment.
- Keep out of reach of children.
- Ensure the flash is securely mounted to the camera or stand to prevent accidental drops.
3. Package Contents
Please check that all items are included in your package:
- 1 x NW700-S Speedlite Flash
- 1 x Mini Stand
- 1 x Protective Bag
- 1 x Instruction Manual (this document, also available as a PDF here)
Figure 2: An overhead view displaying the items included in the NW700-S package: the speedlite flash, a mini stand, and a protective bag.
4. Product Overview
The NW700-S features an intuitive LCD display and control buttons for easy operation. The flash head is designed for flexibility, allowing for various lighting techniques.
Figure 3: A detailed view of the NW700-S's LCD screen and control buttons, illustrating the TCM (TTL Convert to Manual) function for fine-tuning flash parameters.
Key Components:
- Flash Head: Adjustable for tilt and pan.
- LCD Display: Shows current settings, modes, and battery status.
- Control Panel: Includes MODE, SET, RST, ON/OFF buttons, and a directional pad for navigation and adjustments.
- Hot Shoe: For mounting on compatible Sony cameras.
- Battery Compartment: Located at the rear, for 4x AA MH-Ni batteries.
- External Power Port: For optional CP-E4 external power supply.
- USB Type-C Port: For firmware updates.
5. Setup
5.1 Battery Installation
- Open the battery compartment cover on the rear of the flash.
- Insert four (4) AA MH-Ni batteries (recommended) according to the polarity indicators inside the compartment.
- Close the battery compartment cover securely.
5.2 Mounting on Camera
- Slide the NW700-S flash onto your Sony camera's MI Hot Shoe.
- Rotate the locking ring or lever on the flash base to secure it firmly to the hot shoe.
5.3 Power On/Off
- To power on, slide the ON/OFF switch to the 'ON' position.
- To power off, slide the ON/OFF switch to the 'OFF' position.
6. Operating Instructions
6.1 Flash Modes
Press the MODE button to cycle through the available flash modes:
- TTL Auto Flash Mode: The flash automatically determines the optimal light output for accurate exposure.
- Manual (M) Mode: Allows manual adjustment of flash output from 1/1 (full power) to 1/256 in 0.1 stop increments. Use the directional pad to adjust the power level.
- Multi Mode (Stroboscopic): Fires a series of rapid flashes during a single exposure to capture multiple phases of movement. Adjust flash frequency, number of flashes, and power output.
- S1/S2 Optical Control: Enables the NW700-S to function as a slave flash, triggered by another flash. S1 mode triggers on the first flash, while S2 mode ignores the pre-flash of a TTL master flash.
Figure 4: An image demonstrating the NEEWER NW700-S flash mounted on a camera, highlighting its use in TTL Auto Flash Mode for quick and accurate exposure.
6.2 Advanced Flash Features
- High-Speed Sync (HSS): Allows the flash to synchronize with shutter speeds up to 1/8000s, enabling flash use with wide apertures in bright conditions.
- Front & Rear Curtain Sync:
- Front Curtain Sync: Flash fires immediately after the shutter opens.
- Rear Curtain Sync: Flash fires just before the shutter closes, creating a light trail behind moving subjects.
- Flash Exposure Compensation (FEC): Adjust the flash output by ±3 stops in 1/3 stop increments to fine-tune exposure.
- TCM (TTL Convert to Manual) Function: After metering in TTL mode, you can convert the settings to manual mode for precise adjustments while retaining the initial exposure values.
Figure 5: Collage showing various advanced features of the NW700-S flash, including 1/8000s High Speed Sync (HSS), Front and Rear Curtain Sync, Stroboscopic mode, and S1/S2 Optical Slave Mode.
6.3 Flash Zoom & Head Adjustment
- Flash Zoom: The flash coverage can be set automatically or manually to match lens focal lengths from 20mm to 200mm.
- Flash Head Adjustment: The flash head can rotate flexibly for bounce flash and creative lighting:
- Tilt: -7° to 120°
- Pan: 0° to 360°
Figure 6: A visual representation of the NW700-S's adjustable flash zoom, demonstrating coverage from 20mm to 200mm and its effect on light spread.
Figure 7: Illustrations of the flash head's flexibility, showing its ability to tilt from -7° to 120° and pan 0° to 360° for bounce flash and varied lighting angles.
6.4 Using Diffuser & Catchlight Panel
The NW700-S includes a built-in wide-angle diffuser and a catchlight panel. Pull them out from the flash head as needed:
- Wide-Angle Diffuser: Helps to soften the light and spread it over a wider area, ideal for wide-angle lenses.
- Catchlight Panel: Creates a small, natural-looking highlight in the subject's eyes, adding life to portraits.
7. Custom Functions
The NW700-S allows users to customize various settings to suit their preferences. Access these functions via the control panel and LCD display.
Figure 8: A table detailing the custom function symbols, their corresponding functions, set symbols (ON/OFF), and descriptions for the NW700-S flash, including AF-Assist Beam, Auto Sleep, Buzzer, and LCD settings.
Common custom functions include:
- AF-Assist Beam: ON/OFF setting for the autofocus assist beam.
- Auto Sleep Settings (STBY): Configures the flash to enter sleep mode after a period of inactivity (e.g., 60 minutes, 30 minutes).
- Buzzer (BEEP): ON/OFF setting for audible alerts.
- Backlight Illumination Time (LIGHT): Sets how long the LCD backlight stays on (e.g., 12 seconds, Always Off, Always On).
- LCD Display Contrast (LCD): Adjusts the contrast level of the LCD screen (-3 to +3, 7 levels).
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the flash body. For stubborn dirt, use a slightly damp cloth with mild detergent, then wipe dry. Do not use organic solvents like alcohol or thinner.
- Storage: When not in use for extended periods, remove the batteries to prevent leakage. Store the flash in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: Always use fresh, high-quality AA MH-Ni batteries. If using rechargeable batteries, ensure they are fully charged before use.
- Firmware Updates: Periodically check the NEEWER official website for any available firmware updates for your NW700-S model. Updates can be installed via the USB Type-C port.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire. | Low battery, flash not powered on, incorrect camera/flash settings, flash not securely mounted. | Check battery level, ensure flash is ON, verify camera and flash settings (e.g., flash mode, sync), re-mount flash securely. |
| Flash output is too bright/dark. | Incorrect FEC, manual power setting too high/low, subject distance. | Adjust FEC, change manual power output, consider subject distance and aperture. |
| Slow recycling time. | Low battery, high power output. | Replace or recharge batteries, reduce flash power output. |
| Flash not syncing with high shutter speeds. | HSS not enabled or not supported by camera/lens combination. | Ensure HSS is enabled on both flash and camera. Check camera compatibility. |
| Optical slave mode not triggering. | Insufficient light from master flash, incorrect S1/S2 mode, obstruction. | Ensure master flash is strong enough, select correct S1/S2 mode (S2 for TTL pre-flash), clear line of sight. |
10. Specifications
| Feature | Specification |
|---|---|
| Model | NW700-S |
| Guide Number | GN60 (ISO 100, 200mm) |
| FEC | ±3 stops in the 1/3 stop increment |
| Flash Sync | HSS (at 1/8000s max), front and rear curtain sync |
| Flash Coverage | 20-200 mm |
| Tilting Angle | -7° - 120° |
| Panning Angle | 0° - 360° |
| Power Supply | AA MH-Ni battery (recommended) x 4 |
| Full Power Flashes | Approx. 230 times (powered by 2500mA MH-Ni battery) |
| Recycling Time | Approx. 0.1-2.7S |
| Flash Duration | 1/300S-1/20000S |
| Color Temperature | 5600K+200K |
| Optical Control | S1/S2 |
| Transmission Distance | 10m/32.8ft |
| Dimension (WxHxD) | 71 x 55 x 202mm / 2.8”x2.2”x7.9” |
| Net Weight | 368g / 13oz |
| Compatible Camera Brand | Sony |
| Certification | CE, RoHS |
Figure 9: Image highlighting the performance capabilities of the NW700-S, such as 230 full power flashes, 0.1-2.7s fast recycling time, and 1/300s-1/20000s flash duration.
11. User Tips
- Practice with TCM: The TCM function is excellent for learning manual flash. Start with TTL to get a baseline exposure, then switch to manual and adjust slightly to understand the impact of power changes.
- Bounce Flash for Softer Light: Utilize the flexible flash head to bounce light off ceilings or walls for a softer, more natural illumination, especially in indoor settings.
- Experiment with HSS: Don't be afraid to use HSS in bright outdoor conditions to overpower the sun and achieve creative effects with wide apertures.
- External Power for Long Shoots: If you plan extended shooting sessions, consider investing in an external power supply like the CP-E4 to maintain consistent recycling times and prolong battery life.
- Optical Slave Placement: When using S1/S2 modes, ensure a clear line of sight between the master flash and the NW700-S's optical sensor for reliable triggering.
12. Product Video Overview
Watch this video for a visual overview of NEEWER's photography and lighting products, including the NW700-S flash.
Video: An overview video showcasing various NEEWER photography and lighting products, including the NW700-S flash.
13. Warranty & Support
This product is covered by NEEWER's standard warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official NEEWER website or contact their customer service. Keep your purchase receipt as proof of purchase.
For further assistance, you may also consult the comprehensive user manual PDF available here.