1. Introduction
Thank you for choosing the UGREEN HiTune P3 TWS Bluetooth Earphones. These true wireless stereo earbuds are designed to provide a superior audio experience with features like ENC call noise cancellation, ultra-low latency, and fast charging. This manual will guide you through the setup, operation, and maintenance of your new earphones.
2. Package Contents
Please check the package for the following items:
- UGREEN HiTune P3 TWS Earbuds (Left and Right)
- Charging Case
- USB-C Charging Cable
- Silicone Ear Tips (S, M, L sizes)
- User Manual

3. Product Overview
The UGREEN HiTune P3 earbuds feature a lightweight and ergonomic design for comfortable wear. Each earbud weighs only 3.6g and is shaped to fit the curvature of the ear canal. They are equipped with 12mm 'PU+bio-diaphragm' composite dynamic units for clear treble and powerful bass.


4. Setup Instructions
4.1. Charging the Earbuds and Case
Before first use, fully charge the earbuds and charging case.
- Connect the USB-C charging cable to the charging port on the case and to a power source.
- The indicator lights on the case will show the charging status.
- A full charge for the earbuds takes approximately 1.5 hours. The charging case takes about 2 hours to fully charge.
Note: A quick 10-minute charge provides approximately 100 minutes of playtime.

4.2. Pairing with Your Device
The HiTune P3 earbuds support one-step pairing and Bluetooth 5.4 for a stable connection.
- First-time Pairing: Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "UGREEN HiTune P3" from the list to connect.
- Once connected, the earbuds will automatically pair with your device whenever you open the charging case.

4.3. Fitting the Earbuds
Choose the ear tips that provide the best seal and comfort for optimal sound quality and noise cancellation.
- Gently insert the earbuds into your ears.
- Rotate them slightly to find a secure and comfortable fit.
- Test different ear tip sizes (S, M, L) to ensure a good seal.
5. Operating Instructions
5.1. Smart Touch Controls
The HiTune P3 earbuds feature intuitive touch controls for easy management of music and calls.
- One-click: Play/pause music (Left/Right earbud).
- Double-click:
- Next song (Right earbud)
- Previous song (Left earbud)
- Answer/hang up a call (Left/Right earbud)
- Press and Hold for 1 Second:
- Reject an incoming call (Left/Right earbud)
- Activate Voice Assistant (Left earbud)
- Switch Game mode (Right earbud)

5.2. Dual Device Connection
The earbuds can connect to two Bluetooth devices simultaneously, allowing for seamless switching between them.
- Pair the earbuds with your first device (e.g., smartphone).
- Disconnect Bluetooth on the first device or put the earbuds back in the case and close it, then open it again to enter pairing mode.
- Pair the earbuds with your second device (e.g., tablet).
- The earbuds will now be connected to both devices. Audio will switch automatically based on which device is actively playing media or receiving a call.

5.3. UGREEN App Features
Download the UGREEN App to unlock additional features and customize your HiTune P3 earbuds.
- Check Battery Capacity
- Equalizer Adjustment (8 types of EQ)
- Game Mode activation
- Find Your Earbuds function
- Headphone Control customization
- Prompt Sound Settings

6. Maintenance
6.1. Cleaning
Regular cleaning helps maintain the performance and longevity of your earbuds.
- Use a soft, dry, lint-free cloth to wipe the earbuds and charging case.
- For stubborn dirt, slightly dampen the cloth with water.
- Do not use abrasive cleaners or solvents.
- Ensure the charging contacts on both the earbuds and case are clean and dry.
6.2. Water Resistance
The HiTune P3 earbuds are IPX5 waterproof, meaning they are resistant to light rain, accidental splashes, and sweat. This rating applies to the earbuds only; the charging box is NOT waterproof.

7. Troubleshooting
- Earbuds not pairing: Ensure both earbuds are in the charging case, then open the lid to initiate pairing mode. Check your device's Bluetooth settings.
- Only one earbud working: Place both earbuds back in the charging case, close the lid, wait a few seconds, then open it again. This often re-syncs them.
- Poor sound quality: Ensure the ear tips provide a good seal. Try different sizes. Clean the earbud mesh if necessary.
- Earbuds not charging: Check if the charging cable is securely connected and the charging contacts on both earbuds and case are clean.
- Low latency issues: Ensure Game Mode is activated via the UGREEN App or touch controls for optimal gaming experience.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | UGREEN |
| Model Name | WS207 (HiTune P3) |
| Bluetooth Version | 5.4 |
| Bluetooth Profile | HFP/AVRCP/A2DP/BLE/SPP |
| Transmission Distance | 10m / 33ft (max) |
| Codecs | AAC/SBC |
| Frequency Response | 20Hz-20kHz |
| Waterproof Rating | IPX5 (Earbuds only) |
| Charging Port | USB-C |
| Earbud Battery Capacity | 34mAh 3.85V |
| Charging Case Battery Capacity | 440mAh 3.7V |
| Earbud Charging Time | About 1.5 hours |
| Charging Case Charging Time | About 2 hours |
| Single Charge Playback | About 5.5 hours |
| Total Playback (with case) | About 28 hours |
| Material | Metal, PVC, ABS |
| Weight (per earbud) | 3.6g |


9. User Tips
- For the best audio experience, ensure you select the correct size of ear tips that provide a snug fit and good seal in your ear canal.
- Regularly clean the earbuds and charging case to prevent dust and debris from affecting performance.
- If experiencing connection issues, try resetting the earbuds by placing them in the case, closing the lid for 5 seconds, then reopening.
- Utilize the UGREEN App to customize EQ settings and activate Game Mode for specific scenarios.
10. Warranty and Support
UGREEN provides a two-year warranty for the HiTune P3 TWS Bluetooth Earphones. For warranty claims, technical support, or further assistance, please contact UGREEN customer service through their official website or the retailer where you purchased the product. Please retain your proof of purchase for warranty validation.