Xiaomi CDZ1S (Charging Pile)

Contents

Xiaomi Mi Robot Vacuum-Mop Charging Pile User Manual

Model: CDZ1S (Charging Pile)

Compatible with Xiaomi Mi Robot Vacuum-Mop 2 Pro Lite MJST1SHW, MJSTS1, MJSTL, CDZ1S Mop models.

1. Introduction

This manual provides essential information for the safe and efficient use of your Xiaomi Mi Robot Vacuum-Mop Charging Pile. Please read this manual thoroughly before setting up and operating the charging pile. Keep it for future reference.

Xiaomi Mi Robot Vacuum-Mop Charging Pile with power cable

Figure 1: Xiaomi Mi Robot Vacuum-Mop Charging Pile with included power cable.

2. Setup

  1. Choose a Location: Place the charging pile on a hard, level surface against a wall. Ensure there is sufficient clear space around the charging pile (e.g., at least 0.5 meters on both sides and 1 meter in front) to allow the robot vacuum to easily dock. Avoid placing it in direct sunlight or near heat sources.
  2. Connect Power Cable: Insert the power cable into the power input port located at the back of the charging pile.
    Close-up of the power input port on the charging pile

    Figure 2: Power input port.

    Detached power cable for the charging pile

    Figure 3: Power cable.

  3. Plug into Wall Outlet: Plug the other end of the power cable into a suitable wall outlet. Ensure the cable is not tangled or obstructing the robot's path.
  4. Verify Power: The charging pile is now ready. Your robot vacuum should be able to locate and dock with it for charging.

3. Operation

The charging pile operates passively, providing a charging point for your compatible Xiaomi Mi Robot Vacuum-Mop. Once properly set up and powered, the robot vacuum will automatically return to the charging pile when its battery is low or when a cleaning cycle is complete.

  • Ensure the charging contacts on both the robot vacuum and the charging pile are clean and free from obstructions.
  • The robot vacuum will align itself with the charging contacts on the pile to begin charging.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your charging pile.

  • Cleaning Charging Contacts: Periodically wipe the metal charging contacts on the charging pile with a clean, dry cloth. Do not use water or cleaning solutions directly on the contacts.
  • Keep Area Clear: Ensure the area around the charging pile remains free of debris, dust, and obstacles that could prevent the robot vacuum from docking correctly.
  • Power Cable Inspection: Regularly check the power cable for any signs of damage, fraying, or kinks. Replace if necessary.

5. Troubleshooting

Problem Possible Cause Solution
Robot vacuum not charging when docked.
  • Power cable not properly connected.
  • Charging contacts are dirty.
  • Power outlet is not working.
  • Robot vacuum not correctly aligned.
  • Ensure power cable is securely plugged into both the charging pile and the wall outlet.
  • Clean the charging contacts on both the pile and the robot vacuum with a dry cloth.
  • Test the power outlet with another device.
  • Manually place the robot vacuum onto the charging pile to ensure proper alignment.
Robot vacuum cannot find the charging pile.
  • Charging pile is obstructed.
  • Charging pile is moved from its original position.
  • Clear any obstacles around the charging pile.
  • Ensure the charging pile is in its designated, unobstructed location.
Charging pile appears non-functional.
  • No power supply.
  • Internal fault.
  • Check power connections and outlet.
  • If all connections are secure and power is available, contact customer support.

6. Specifications

Feature Detail
Product Model CDZ1S
Material Metal, ABS Plastic
Input Voltage 100-240V~
Frequency 50/60Hz
Input Current 0.6A
Compatible Robot Models Xiaomi Mi Robot Vacuum-Mop 2 Pro Lite MJST1SHW, MJSTS1, MJSTL, CDZ1S Mop
Approximate Product Dimensions (L x W x H) 20 cm x 20 cm x 10 cm (Based on package dimensions, actual product size may vary slightly)
Product label showing model CDZ1S and input specifications

Figure 4: Product label with specifications.

7. Warranty and Support

For warranty claims, technical assistance, or any questions regarding your Xiaomi Mi Robot Vacuum-Mop Charging Pile, please contact the original seller or the manufacturer's customer support. Keep your purchase receipt as proof of purchase.

8. User Tips

  • Verify Compatibility: Before purchase or use, always double-check that this charging pile (Model CDZ1S) is compatible with your specific Xiaomi Mi Robot Vacuum-Mop model (e.g., MJST1SHW, MJSTS1, MJSTL, CDZ1S Mop). Refer to your robot vacuum's manual for compatible accessories.
  • Stable Placement: Ensure the charging pile is placed on a stable, flat surface to prevent accidental movement, which could hinder the robot's ability to dock.
  • Cable Management: Secure the power cable to prevent it from being run over by the robot vacuum or becoming a tripping hazard.

© 2024 Xiaomi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.