1. Introduction
Thank you for choosing the Yeelight Ultra-Thin Cabinet Light A30/A50. This smart induction light is designed to provide convenient and efficient lighting for various spaces such as wardrobes, corridors, and cabinets. Featuring a motion sensor, dimmable light, and a rechargeable battery, it offers a versatile lighting solution. Please read this manual carefully before use to ensure proper installation and operation.
2. Package Contents
- Lamp Body (A30 or A50 model)
- Instruction Manual
- Power Cord (USB-C)
- Double-sided Tape
- Magnetic Adsorption Sheet(s)
Note: The quantity of lamp bodies and magnetic adsorption sheets may vary based on the purchased package.
3. Specifications
| Feature | Specification |
|---|---|
| Product Name | Yeelight Ultra-Thin Cabinet Light A30/A50 |
| Model Numbers | YLYYD-0014 (A30), YLYYD-0015 (A50) |
| Input Voltage | 5V 1A |
| Rated Power | 5W (A30), 6.5W (A50) |
| Light Source Color Temperature | 4000K (Neutral Light) |
| Battery Capacity | 1100mAh (A30), 1500mAh (A50) |
| Product Size | 30 x 4 x 0.7 cm (A30), 50 x 4 x 0.7 cm (A50) |
| Power Source | DC, Battery Included (Yes) |
| Communication Method | Other (Not wireless communication) |
| State of Assembly | Ready-to-Go |
| Features | Flashing, Magnetic |
| Control Channels | 2 CHANNELS |
| Origin | Mainland China |
| Certification | CE, FCC |
4. Key Features
- Ultra-Thin Design: 7mm body for a sleek and stylish appearance, allowing for concealed installation.
- Magnetic Mounting: Easy setup with built-in magnets for metal surfaces or adhesive magnetic sheets for other surfaces, providing flexible lighting.
- Smart Induction: Equipped with a precision human body sensor and a light sensor for automatic illumination.
- Dimmable Lighting: Offers stepless dimming and 3-level dimming options to adjust brightness according to your needs.
- Optimal Color Temperature: 4000K scientific color temperature provides a gentle, neutral light without glare, suitable for various occasions.
- Long Battery Life: Large capacity rechargeable battery ensures extended usage. A50 model offers 1500mAh (up to 6 months in Auto mode, 24 hours in Always On mode at minimum brightness). A30 model offers 1100mAh (up to 6 months in Auto mode, 33 hours in Always On mode at minimum brightness).
- Versatile Modes: Features ON, AUTO, and OFF modes for different lighting requirements.
- Wide Lighting Angle: Provides a 90° wide lighting angle to illuminate a broad area.
5. Setup and Installation
5.1 Unboxing and Components
Carefully open the product packaging. Ensure all components listed in the 'Package Contents' section are present.
Video: Unboxing, installation, and usage demonstration of the Yeelight Cabinet Light.
5.2 Mounting the Light
The Yeelight Cabinet Light features a magnetic design for easy installation.
- For Metal Surfaces: The light can be directly attached to any metal surface due to its built-in magnets.
- For Other Surfaces (e.g., wood, plastic):
- Clean the desired installation area to ensure it is dry and free of dust.
- Peel off the protective film from one side of the double-sided tape and attach it to the magnetic adsorption sheet.
- Peel off the protective film from the other side of the double-sided tape and firmly press the magnetic adsorption sheet onto the cleaned surface.
- Attach the light body to the magnetic adsorption sheet. The magnets will hold it securely in place.

Image: Easy setup with built-in magnets for metal surfaces and adhesive magnetic plates for other surfaces.

Image: Concealed installation of the 0.27-inch ultra-thin light under cabinets.
6. Operating Instructions
The Yeelight Cabinet Light offers versatile lighting modes and dimming capabilities.
6.1 Mode Selection
The light features a toggle switch with three positions: ON, AUTO, and OFF.
- ON Mode: The light remains continuously on.
- AUTO Mode: The light will automatically turn on when motion is detected in a dark environment. It combines a human body sensor and a light sensor. The maximum sensing range is approximately 9.8 inches (25 cm).
- OFF Mode: The light is turned off.

Image: Motion and light sensor design with a 9.8-inch sensing range, activating when a person is nearby.
6.2 Brightness Adjustment (Dimming)
The light can be dimmed using the touch switch, located near the toggle switch.
- In ON Mode:
- Short Press: Turns the light ON or OFF.
- Long Press: Activates stepless dimming. Hold the button to gradually increase or decrease brightness. Release when the desired brightness is reached.
- In AUTO Mode:
- Short Touch: Cycles through 3 preset brightness levels (10%, 50%, 100%).
- Long Press: Activates stepless dimming. Hold the button to gradually increase or decrease brightness. Release when the desired brightness is reached.
- In OFF Mode: The touch switch is inactive.

Image: Versatile modes for all, illustrating stepless dimming and on/off in ON mode, and 3-level/stepless dimming in AUTO mode.

Image: Stepless dimming, allowing adjustment to any brightness level for comfort.
6.3 Charging the Battery
When the battery is low, the light's performance may diminish. Use the provided USB-C power cord to charge the device. Connect the USB-C end to the light and the USB-A end to a compatible 5V 1A USB power adapter (not included).

Image: Ultra Long Standby Time for A50 (1500mAh), offering 6 months in Auto mode and 24 hours in Always On mode (at minimum brightness).

Image: Ultra Long Standby Time for A30 (1100mAh), offering 6 months in Auto mode and 33 hours in Always On mode (at minimum brightness).
7. Maintenance
- Cleaning: Use a soft, dry cloth to wipe the surface of the light. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Storage: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
- Battery Care: Avoid fully discharging the battery frequently. Charge the light when the brightness noticeably decreases.
8. Troubleshooting
- Light not turning on:
- Check if the switch is in the 'OFF' position.
- Ensure the battery is charged. Connect to a power source and try again.
- In 'AUTO' mode, ensure there is sufficient darkness and motion within the sensing range.
- Motion sensor not working:
- Verify the switch is in 'AUTO' mode.
- Ensure the environment is dark enough for the light sensor to activate the motion sensor.
- Check for obstructions blocking the sensor.
- Light is dim or flickers:
- The battery may be low. Recharge the device.
- Adjust the brightness using the touch switch.
- Light falls off:
- Ensure the installation surface is clean and dry before applying the adhesive magnetic sheet.
- For heavy use or rough surfaces, consider using stronger adhesive or alternative mounting methods if suitable.
9. User Tips
- Verify Package Contents: Before installation, always check the package to confirm the number of light bars and accessories received matches your order, especially if purchasing multiple units or different models (A30/A50).
- Optimal Placement: For best motion sensing performance, place the light where movement is most likely to occur within its 9.8-inch range. Avoid placing it in direct sunlight or near heat sources that could interfere with the sensor.
- Charging Indicator: Pay attention to any charging indicators (if present) to know when the light is fully charged.
10. Warranty and Support
Yeelight products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official Yeelight website or contact your local distributor. Keep your purchase receipt as proof of purchase.