1. Introduction
The AYINO DA310B is a versatile 2-in-1 Bluetooth Receiver and Transmitter, functioning as a high-fidelity audio decoding and playback machine. It integrates multiple input and output options, including Optical, Coaxial, Bluetooth 5.3, U-disk, PC-USB, and AUX, along with a 6.5mm microphone input. Designed with a custom chip featuring DSP+9 EQ sound processing and an independent headphone amplifier, the DA310B aims to provide a rich audio experience for various entertainment needs, including music playback, movie sound, and karaoke.
It supports 192K 24BIT digital-to-analog conversion and Bypass pass-through, allowing wired inputs to be synchronized across multiple audio devices. The audio of TVs, computers, mobile phones, and set-top boxes can be connected to traditional speakers, power amplifiers, or headphones. Additionally, its Bluetooth transmission function enables wireless audio streaming to Bluetooth headphones or speakers.
The DA310B comes with a remote control for full functionality, including K-song effects, sound effect switching, and multimedia playback control for U-disk and PC-USB inputs.
Key Features:
- Bluetooth 5.3 (Reception & Transmission)
- Multiple Inputs: Optical, Coaxial, U-disk, PC-USB, AUX, 6.5mm Microphone
- High-fidelity professional headphone amplifier (215mW@16Ω, 200mW@32Ω, 0.005% THD+N)
- BYPASS function for 3.5mm (AUX) ear amplifier, Bluetooth transmission, and RCA synchronous output
- Supports up to 192kHz / 24Bit sampling rate for Optical and Coaxial inputs
- U-disk playback for MP3, WAV, WMA, APE, FLAC (up to 128GB FAT32 format)
- Multimedia remote control with digital song selection for U-disk
- Power memory and automatic restoration of previous state
- Full mode mute processing to eliminate prompt sound interference
- Unique 3D surround sound function with multiple EQ modes (Normal, 3D, Enhanced Bass, 3D+Enhanced Bass)

2. Safety and Warnings
Please read all instructions carefully before using the device to prevent damage to the product or potential injury.
- Keep the device and its cords out of reach of children under 3 years old.
- Ensure children are supervised when near the device.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow all installation and operation guidelines to avoid injury.
- Do not expose the device to water or moisture. This product is not waterproof. Keep it dry.
- Any unauthorized modifications may void the warranty.
Compliance Information:
This product complies with CE, UKCA, FC, and RoHS standards.

3. Package Contents
Please check the package for the following items:
- AYINO DA310B Audio Converter Unit
- Power adapter
- Power cable
- Optical fiber cable
- 3.5mm to R&L RCA cable
- Antenna
- Remote control

4. Device Overview
Familiarize yourself with the front and back panels of the DA310B unit.

Front Panel:
- Microphone Input (6.5mm)
- AUX Headphone Amplifier Output
- Remote Control Reception Window (IR)
- Previous Song Button
- Play/Pause Button
- Next Song Button
- Volume Knob / Mode Switch (Short press: Mode switch; Long press: Shutdown)
Indicators:
- BR: Bluetooth Reception Indicator Light
- BT: Bluetooth Transmission Indicator Light
- USB: U Disk Input Indicator
- OPT: Optical Input Indicator
- COX: Coaxial Input Indicator
- OTG: Sound Card Input Indicator
- AUX: AUX Input Indicator Light
Back Panel:
- DC5V: 5V Power Interface
- OTG/USB: Sound Card / U Disk Input Port
- AUX: AUX Input Port
- COX: Coaxial Input Port
- OPT: Optical Input Port
- R: Right Channel Output Port (RCA)
- L: Left Channel Output Port (RCA)
- ANT: Antenna Connector
5. Setup Guide
5.1 Initial Connection
- Connect Antenna: Screw the provided antenna into the ANT connector on the back panel for optimal Bluetooth range.
- Power Connection: Connect the power adapter to the DC5V port on the back panel and plug it into a power outlet.
- Power On: The device will automatically start or can be powered on by a short press of the Volume knob (7) if it's off.
5.2 Connecting Audio Sources and Outputs
The DA310B supports various input and output configurations. Refer to the connection diagram for visual guidance.

5.2.1 Bluetooth Reception Mode (RX)
Connect your mobile phone, tablet, or computer wirelessly to the DA310B to convert Bluetooth audio into wired output for traditional audio devices.
- Ensure the DA310B is in Bluetooth Reception mode (BR indicator light). If not, short press the Volume knob (7) to cycle modes until BR is active.
- On your mobile device, enable Bluetooth and search for "DA310".
- Select "DA310" to pair. Once paired, the BR indicator will be solid.
- Connect the DA310B's R&L RCA output to your amplifier or active speakers, or connect headphones to the AUX Headphone Amplifier Output (2).

5.2.2 Bluetooth Transmission Mode (TX)
Transmit audio from the DA310B (via Optical, Coaxial, or AUX input) wirelessly to Bluetooth headphones or speakers.
- Connect your audio source (e.g., TV, projector, set-top box) to the DA310B using an Optical, Coaxial, or AUX cable.
- Short press the Volume knob (7) to cycle modes until the BT indicator light is active (Bluetooth Transmission mode).
- On your Bluetooth headphones or speakers, activate pairing mode.
- The DA310B will automatically search and connect to new Bluetooth devices.
- To disconnect an existing Bluetooth transmission, long press the BT button on the remote control. To re-match, repeat the process.

5.2.3 Optical/Coaxial/USB Input to Amplifier
Connect digital audio sources (TV, set-top box, computer) to your amplifier or speakers.
- Connect your TV, set-top box, or other digital device to the DA310B's OPT (Optical) or COX (Coaxial) input port.
- Alternatively, connect your computer or mobile phone (with OTG support) to the OTG/USB port.
- Connect the DA310B's R&L RCA output to your power amplifier or active speakers using the provided 3.5mm to R&L RCA cable or other suitable RCA cables.
- Short press the Volume knob (7) to select the corresponding input mode (OPT, COX, or OTG/USB).


5.2.4 U-Disk Playback
Play audio files directly from a USB flash drive.
- Insert a USB flash drive (formatted to FAT32, up to 128GB) containing MP3, WAV, WMA, APE, FLAC files into the OTG/USB port.
- Short press the Volume knob (7) to select the USB input mode. The USB indicator will light up.
- Use the remote control to select songs (4-digit selection), switch between previous/next tracks, and play/pause.
- Important: Turn off Bluetooth transmission when playing high bit rate audio from the U-disk to ensure optimal performance.

5.2.5 Microphone Input
Use the 6.5mm microphone input for singing and karaoke.
- Plug your 6.5mm microphone into the Microphone Input (1) on the front panel.
- Adjust the microphone volume and sound effects (reverb, background sound, vocal cancellation) using the remote control.

6. Operating Instructions
6.1 Remote Control Functions
The remote control provides comprehensive control over the DA310B's features.

- Power Button: Turns the device on/off.
- EQ Button: Cycles through multiple sound effect switching options (Normal, 3D, Enhanced Bass, 3D+Enhanced Bass).
- Bluetooth Transmission Button:
- Short press: Enable Bluetooth transmission, automatically connect or match new devices.
- Long press: Turn off Bluetooth transmission.
- Bluetooth Reception Button:
- Long press: Disconnect Bluetooth connection.
- Re-matching new equipment.
- Previous/Next Song Buttons: Navigate tracks in U-disk, Bluetooth reception, and PC-USB modes.
- Play/Pause Button: Controls playback in U-disk, Bluetooth reception, and PC-USB modes.
- Volume Up/Down Buttons: Adjust output volume.
- U-disk Playback Mode: Use number keys (0-9) for 4-digit song selection.
- Restore Default Values (REST button): Resets Sound Effects to Normal, Cycle Order, and Reverb/Accompaniment/Mark Style.
- Input Selection Buttons (OTG, USB, AUX, OPT, COX): Directly select the desired input source.
- MIC+, MIC-: Adjust microphone volume.
- ECHO+, ECHO-: Adjust microphone echo effect.
- MUSIC+, MUSIC-: Adjust music volume (separate from master volume).
6.2 Sound Effect Adjustment (EQ)
The DA310B features a built-in DSP with 9-segment sound effect adjustment.
- Press the EQ button on the remote control to cycle through different sound effects.
- Available modes include: Standard, Classical, 3D, 3D+ Strong Bass, Bass Enhancement.
- Select the desired mode for an immersive listening experience.

6.3 Volume Control
The DA310B offers independent volume control for different stages of audio processing.

- Main Volume Knob (7): Adjusts the overall output volume.
- MIC+/MIC- Buttons (Remote): Adjusts microphone input volume.
- MUSIC+/MUSIC- Buttons (Remote): Adjusts music playback volume (separate from master volume).
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the device to strong impacts.
- Moisture: Keep the device dry. Exposure to water or moisture can cause damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Bluetooth device cannot pair. |
|
|
| U-disk playback issues. |
|
|
| Poor Bluetooth range. |
|
|

9. Specifications
| Feature | Detail |
|---|---|
| Brand | AYINO (HIFICHOI) |
| Model | DA310B |
| Shell Material | Aluminum alloy |
| Bluetooth Version | V5.3 |
| Input Modes | Bluetooth, Coaxial, Optical, U disk, USB sound card (PC-USB), AUX, 6.5mm Microphone |
| Output Modes | Bluetooth transmission, AUX, RCA (R&L) |
| Bluetooth Protocol | A2DP/AVRCP/AAC/SBC |
| Bluetooth Distance | Within 15 meters (with external antenna) |
| Optical & Coaxial Input Sampling Rate | 192KHz 24Bit |
| USB Sound Card Input | 48KHz (DVD sound quality), drive-free, plug and play, supports mobile OTG |
| SNR (Signal-to-Noise Ratio) | ≥ 105dB |
| Frequency Response | 20Hz~20Khz |
| EQ Mode | Normal, 3D, Enhanced Bass, 3D+Enhanced Bass |
| Power Supply | DC 5V/1A |
| Product Size (L*W*H) | 113 * 63 * 27mm |
| Product Weight | 143.5g |
| Headphone Amplifier Output | Up to 200mW |
| Support Memory Card | Yes (U-disk) |
| Support AAC | Yes |
| Sound Track | Double |
| Interface | 3.5 MM, USB, Type-C (OTG/USB port) |

10. User Tips
- Bluetooth Codecs: The DA310B supports A2DP/AVRCP/AAC/SBC protocols. If you require advanced codecs like LDAC or LHDC, please verify compatibility as they are not explicitly listed.
- U-Disk Performance: For the best audio quality when playing high bit rate files from a U-disk, ensure Bluetooth transmission is turned off.
- Remote Control Range: Ensure a clear line of sight between the remote control and the IR reception window on the front panel for optimal responsiveness.
- Antenna for Range: Always use the external antenna for maximum Bluetooth reception and transmission range (up to 15 meters).
11. Warranty and Support
Please retain your proof of purchase for warranty service. Any unauthorized modifications to the product may void the warranty.
For further assistance or technical support, please contact your retailer or the manufacturer directly.
A detailed user manual in PDF format is available for download: View User Manual (PDF)