CHENXI 8859

Contents

CHENXI 8859 Mechanical Watch Instruction Manual

Model: 8859 | Brand: CHENXI

1. Introduction

Thank you for choosing the CHENXI 8859 Mechanical Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.

Video: Unboxing and initial overview of the CHENXI 8859 Mechanical Watch.

2. Setup

2.1 Unboxing

Carefully remove the watch from its packaging. Inspect the watch for any visible damage or defects. Ensure all protective films are removed from the watch face, case back, and strap.

2.2 Initial Winding

As a mechanical watch, the CHENXI 8859 requires manual winding or movement to operate. To start the watch, gently rotate the crown clockwise approximately 20-30 times while it is in its normal, pushed-in position. This will provide initial power to the movement.

Diagram showing how to pull out the crown and rotate it for setting

Image: Detailed view of the watch movement and crown, indicating winding and setting positions.

2.3 Setting Time and Date

  1. Time Setting: Pull the crown out to the outermost position. Rotate the crown to set the hour and minute hands to the correct time. Push the crown back in to start the watch.
  2. Date Setting: Pull the crown out to the middle position. Rotate the crown to adjust the date. Be careful not to set the date between 9 PM and 3 AM, as this can damage the movement. Push the crown back in when finished.
  3. Moon Phase Setting: The Moon Phase function is typically synchronized with the 24-hour hand. Adjusting the time will also adjust the Moon Phase display.

2.4 Band Adjustment

The stainless steel strap features a bilateral butterfly clasp. If the strap needs adjustment (e.g., removing or adding links), it is recommended to have this done by a professional watchmaker to avoid damage.

3. Operating Instructions

3.1 Automatic Self-Winding Movement

Your CHENXI 8859 watch is equipped with an automatic self-winding mechanical movement. This means the watch is powered by the natural motion of your wrist. When worn regularly (approximately 8-10 hours a day), it will self-wind and maintain power. If the watch is not worn for an extended period, it may stop and require manual winding as described in Section 2.2.

3.2 Dial Functions

Detailed view of the watch dial highlighting Moon Phase, 24-hour, and small second functions

Image: Close-up of the watch dial showing the Moon Phase, 24-hour sub-dial, and small second sub-dial.

  • Moon Phase Function: Displays the current phase of the moon, synchronized with the 24-hour cycle.
  • 24-Hour Hand: A sub-dial that indicates the time in a 24-hour format, useful for tracking day/night.
  • Small Second Dial: A dedicated sub-dial for displaying the seconds, providing a continuous sweep.

3.3 Luminous Display

The hands of the watch are coated with a luminous material that absorbs light during the day and glows in the dark, allowing for clear time reading at night.

Watch dial showing luminous hands in the dark

Image: The watch dial with its luminous hands glowing in low light conditions.

4. Maintenance

4.1 Water Resistance

Your CHENXI 8859 watch is rated for 3 ATM (30 meters) water resistance. This means it is suitable for daily use, such as hand washing, sweating, and light rain. It is NOT suitable for showering, swimming, diving, or any water activities where it might be submerged or exposed to high-pressure water. Avoid contact with hot water or steam.

Water resistance diagram showing suitable and unsuitable water exposure

Image: Diagram illustrating the water resistance capabilities and limitations of the watch.

4.2 Cleaning

To maintain the appearance of your watch, wipe the case and strap regularly with a soft, dry cloth. For stainless steel parts, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.

4.3 Storage

When not wearing the watch, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. If storing for an extended period, ensure it is fully wound or consider using a watch winder to keep the movement lubricated.

5. Troubleshooting

  • Watch has stopped: If the watch has stopped, it likely needs to be wound. Manually wind the watch by rotating the crown clockwise 20-30 times. If it still doesn't start, ensure the crown is fully pushed in.
  • Time is inaccurate: Mechanical watches can have slight variations in accuracy. If the inaccuracy is significant, ensure the watch is fully wound and has not been exposed to strong magnetic fields. If the problem persists, professional inspection may be required.
  • Condensation under the crystal: This indicates moisture ingress. Immediately take the watch to a professional watchmaker for inspection and repair to prevent further damage to the movement. Avoid exposing the watch to water until it has been serviced.

6. Specifications

Dimension Specification table for the watch

Image: Detailed dimension specifications of the CHENXI 8859 watch.

FeatureSpecification
Model NumberCHENXI 8859
MovementAutomatic Self-Wind (Original Mechanical Movement)
Case MaterialAlloy
Band Material TypeStainless Steel
Dial Window Material TypeHardlex (Mineral-Reinforced Glass)
Water Resistance Depth3Bar (30 meters)
Case ShapeRound
Case Thickness12.5mm
Dial Diameter41mm
Band Width20-24mm
Band Length23cm
Clasp TypeBracelet Clasp (Press Buckle)
Weight130g
FeaturesMoon Phase, 24-Hour Display, Small Second Dial, Luminous Hands

7. User Tips

  • Regular Winding: If you don't wear your watch daily, remember to manually wind it every 24-36 hours to keep it running smoothly and maintain accuracy.
  • Avoid Shocks: Mechanical watches are delicate. Avoid dropping your watch or exposing it to strong impacts, which can damage the intricate internal components.
  • Magnetic Fields: Keep your watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices) as magnetism can affect the accuracy of the mechanical movement.
  • Water Resistance Caution: Always ensure the crown is fully pushed in before any contact with water, even for hand washing. Never operate the crown while the watch is wet.

8. Warranty and Support

For any issues or inquiries regarding your CHENXI 8859 Mechanical Watch, please contact the seller or manufacturer directly. Keep your purchase records for reference. Specific warranty terms and conditions may vary by retailer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.