1. Introduction
This manual provides essential information for the safe and effective use of your I6 MAX Drone original accessories. It covers various components such as 3.7V 1800 mAh batteries, propellers, and charging cables. Please read this manual thoroughly before using the accessories to ensure optimal performance and longevity.
2. Product Overview
The I6 MAX Drone accessories are designed to enhance and maintain the performance of your I6 MAX Drone. Available accessories include:
- 3.7V 1800 mAh Batteries: High-capacity lithium batteries for extended flight time.
- Propellers (Maple Leaf): Replacement propeller sets for stable flight.
- Charging Cables: USB charging cables and 3-in-1 charging cables with plugs for convenient power replenishment.
Available Accessory Options:
A single 3.7V 1800 mAh battery for the I6 MAX Drone. 
Two batteries and a 3-in-1 charging cable for the I6 MAX Drone. 
Three batteries and a 3-in-1 charging cable for the I6 MAX Drone. 
A set of four propellers for the I6 MAX Drone. 
Two sets of eight propellers for the I6 MAX Drone. 
Four sets of sixteen propellers for the I6 MAX Drone. 
A 3-in-1 charging cable with a power adapter, suitable for various regions. 
A standard USB charging cable for drone accessories.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | LISM |
| Model Number | I6 MAX Drone Battery i6 Drone Parts |
| For Vehicle Type | Airplanes |
| RC Parts & Accs | Batteries - LiPo |
| Upgrade Parts/Accessories | Lithium Battery |
| Remote Control Peripherals/Devices | Battery |
| Tool Supplies | Battery |
| Four-wheel Drive Attributes | Battery |
| Material | Metal |
| Recommend Age | 14+y |
| Use | Vehicles & Remote Control Toys |
| Origin | Mainland China |
| High-concerned chemical | None |
| Is Electric | No Battery |
| Is Batteries Included | No |
| Is it battery/power supply | N |
| Is it charger/adapter | N |
| Size | Not measured |
| Technical parameters | Value 8 (Not further specified) |
| Wheelbase | Bottom Plate |
4. Setup Instructions
4.1. Battery Installation
- Ensure the drone is powered off before installing or removing batteries.
- Locate the battery compartment on your I6 MAX Drone.
- Insert the 3.7V 1800 mAh battery into the compartment, ensuring it clicks securely into place.
- Close the battery compartment cover.
4.2. Propeller Replacement
Always replace propellers in sets (e.g., all four) to maintain balance and flight stability.
- Identify the damaged propeller(s).
- Carefully remove the old propeller by gently pulling it upwards or unscrewing it, depending on your drone's design. Note the rotation direction or markings (A/B or CW/CCW) on the propeller and motor.
- Align the new propeller with the motor shaft, ensuring the correct rotation direction (A/B or CW/CCW) matches the motor.
- Press down firmly or screw the propeller into place until it is secure. Do not overtighten.
- Repeat for all necessary propellers.
4.3. Charging the Battery
Use only the provided charging cables and adapters.
- Connect the USB end of the charging cable (or the 3-in-1 charging cable) to a compatible USB power source (e.g., computer, USB wall adapter).
- Connect the other end of the charging cable to the battery. For 3-in-1 cables, ensure the correct connector is used for your battery.
- If using a 3-in-1 charging cable with a plug, ensure the plug matches your country's standard.
- The charging indicator on the cable or battery will typically show red during charging and turn green or off when fully charged.
- Charging time may vary depending on the power source and battery level.
5. Operating Principles
5.1. Battery Usage
- Always use fully charged batteries for optimal flight performance.
- Avoid completely draining the battery, as this can reduce its lifespan.
- Do not expose batteries to extreme temperatures or direct sunlight.
5.2. Propeller Usage
- Ensure propellers are free from damage (cracks, bends) before each flight.
- Damaged propellers can lead to unstable flight and potential crashes.
- Always use the correct type and size of propellers for your I6 MAX Drone.
6. Maintenance
6.1. Battery Care
- Store batteries in a cool, dry place away from direct sunlight.
- For long-term storage, charge batteries to approximately 50-60% capacity.
- Inspect batteries regularly for any signs of swelling, leakage, or damage. Discontinue use immediately if any damage is observed.
6.2. Propeller Care
- Clean propellers gently with a soft, dry cloth to remove dust or debris.
- Check for any nicks, cracks, or bends after each flight. Replace damaged propellers promptly.
6.3. Charging Cable Care
- Keep charging cables free from kinks or sharp bends.
- Store cables in a tidy manner to prevent damage.
- Do not use damaged charging cables or adapters.
7. Troubleshooting
7.1. Battery Not Charging
- Ensure the charging cable is securely connected to both the power source and the battery.
- Try a different USB port or power adapter.
- Check the charging cable for any visible damage.
- If the battery is severely depleted, it might take a few minutes for the charging indicator to light up.
7.2. Drone Unstable After Propeller Replacement
- Verify that all propellers are installed correctly and securely.
- Ensure that the correct type and rotation direction (A/B or CW/CCW) of propellers are used for each motor.
- Check for any remaining damage on the new propellers or motors.
8. User Tips
- Battery Cycling: For optimal battery health, try to avoid frequent full discharges and charges. Partial charges are generally better for LiPo batteries.
- Propeller Balance: If you notice slight vibrations after replacing propellers, ensure they are perfectly balanced. Minor imperfections can sometimes be smoothed out with very fine sandpaper, but replacement is often safer.
- Cable Management: Keep your charging cables organized to prevent tangles and damage, which can extend their lifespan.
9. Warranty and Support
For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
