EFT Z30 Z50 Drone Centrifugal Nozzle CN500/V2.1

Contents

EFT Z30 Z50 Drone Centrifugal Nozzle Instruction Manual

Model: Z30 Z50 Drone Centrifugal Nozzle CN500/V2.1 | Brand: EFT

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of the EFT Z30 Z50 Drone Centrifugal Nozzle (CN500/V2.1). This component is specifically designed as a repair and replacement part for EFT Z30 and Z50 series agricultural drones, featuring a drip-proof mechanism for efficient and precise spraying. Please read this manual thoroughly before attempting any installation or operation.

EFT Logo

Image: EFT company logo.

2. Product Overview

The EFT Centrifugal Nozzle is a critical component for agricultural spraying drones, ensuring controlled and efficient liquid dispersion. It features a drip-proof design to prevent unwanted leakage and optimize spray performance.

Front view of two EFT centrifugal nozzles
Front view of two EFT centrifugal nozzles.
Side view of two EFT centrifugal nozzles
Side view of two EFT centrifugal nozzles.
Bottom view of two EFT centrifugal nozzles
Bottom view of two EFT centrifugal nozzles.
Top view of two EFT centrifugal nozzles
Top view of two EFT centrifugal nozzles.
Angled view of two EFT centrifugal nozzles
Angled view of two EFT centrifugal nozzles.

3. Specifications

AttributeValue
Brand NameEFT
ModelCN500/V2.1
ConditionNew
TypeCrop Spraying Drone Part
UsagePesticide sprayer
FeatureFarm tools, Automatic Flight, Drip-proof
FunctionGeoponics irrigation
Core ComponentsFrame
Warranty of Core Components1 year
Warranty1 year
High-concerned chemicalNone
Video outgoing-inspectionprovided
Machinery Test Reportprovided
Marketing TypeFactory direct sale
Key Selling PointsLarge Load
Applicable Industriesagriculture
OriginMainland China
Place Of OriginChina-anhui

4. Installation

This centrifugal nozzle is intended for repair and replacement on EFT Z30/Z50 drones. Ensure the drone is powered off and disconnected from any power sources before beginning installation.

  1. Preparation: Identify the nozzle(s) to be replaced. Gather necessary tools, typically a screwdriver.
  2. Removal: Carefully detach the existing nozzle from the drone's spray system. Note the orientation and connection points.
  3. Installation: Align the new EFT centrifugal nozzle (CN500/V2.1) with the mounting points on the drone's spray arm. Secure it using the appropriate fasteners. The video below demonstrates general drone assembly, which can provide context for handling drone components.
  4. Connection: Ensure all fluid lines and electrical connections (if any) are securely attached to the new nozzle.
  5. Verification: After installation, visually inspect all connections for tightness and proper alignment.

Video: Z30/Z50 Product Assessment. This video demonstrates the unboxing and assembly process of the EFT Z30/Z50 drone, including various components like arm parts, drone body, tank, pump, landing gear, and cabin sections. It also shows spray and flight tests, providing a general overview of the drone's structure and functionality relevant to component installation.

5. Operation

Once installed, the centrifugal nozzle operates as part of the drone's spraying system. Its primary function is to atomize and disperse liquid solutions (e.g., pesticides, fertilizers) over agricultural areas.

  • Centrifugal Action: The nozzle uses centrifugal force to break down liquid into fine droplets, ensuring even coverage.
  • Drip-Proof Feature: The integrated drip-proof mechanism prevents liquid from dripping when the spray system is off or between spray passes, conserving solution and preventing unintended application.
  • System Integration: The nozzle's operation is controlled by the drone's flight controller and spraying system. Refer to your main EFT drone manual for specific instructions on activating and calibrating the spray system.

6. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your centrifugal nozzle.

  • Cleaning: After each use, especially when spraying corrosive or sticky solutions, thoroughly clean the nozzle with clean water to prevent clogging and residue buildup.
  • Inspection: Periodically inspect the nozzle for any signs of wear, damage, or blockages. Check for cracks, deformities, or foreign objects that might affect spray pattern or drip-proof function.
  • Storage: When not in use, store the nozzle in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your centrifugal nozzle, consider the following common problems and solutions:

  • No Spray/Reduced Flow: Check for blockages in the nozzle or fluid lines. Ensure the pump is functioning correctly and there is sufficient liquid in the tank.
  • Uneven Spray Pattern: Inspect the nozzle for partial blockages or damage to the spray orifice. Ensure the nozzle is securely mounted and not vibrating excessively.
  • Dripping: Verify that the drip-proof mechanism is clean and free from debris. If dripping persists, the internal components of the drip-proof mechanism may be worn and require replacement.
  • Leaks: Check all connections for tightness. Inspect the nozzle body for cracks or damage.

For complex issues or if troubleshooting steps do not resolve the problem, it is recommended to consult with a qualified drone technician or the EFT online service.

8. User Tips

  • Proper Usage: This accessory is specifically for repair and replacement of EFT drones. Ensure it is compatible with your drone model (Z30/Z50).
  • Technical Support: While this manual provides guidance for the accessory, for comprehensive technical support related to the drone system, refer to your main EFT drone manual. For specific questions about this nozzle accessory, contact the seller's online service before placing an order or attempting complex repairs.
  • Pre-flight Check: Always perform a visual inspection of the nozzles before each flight to ensure they are clean, undamaged, and securely attached.
Warm Notice: This accessory is only used for REPAIR and REPLACEMENT of EFT drones. NO Technical support for accessories. If you have any questions, please contact online service before placing an order.

Image: Important notice regarding the accessory's use for repair/replacement and technical support.

9. Warranty and Support

The EFT Centrifugal Nozzle comes with a 1-year warranty, covering the core components. For specific warranty claims or detailed terms, please refer to your purchase documentation or contact the seller directly.

For any questions regarding this accessory or its compatibility, please contact the EFT Drone Official Store's online service. Please note that direct technical support for accessories may be limited, and it is recommended to consult the main drone manual for system-level issues.

EFT Electronic Technology Co. Ltd production base, quality assurance, and efficient production

Image: EFT Electronic Technology Co. Ltd overview, highlighting technological innovation, quality assurance, and efficient production processes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.